Sikafloor®-151 is a two-component, low-viscosity epoxy resin used as a primer. It is suitable for concrete and cement substrates with low to medium absorbency, providing excellent adhesion and quick curing.

SikaDecor®-801 Nature is a two-component microcement designed for creating decorative coatings for interior walls and floors. It provides high adhesion, UV resistance, and a unique aesthetic finish. Ideal for residential...

SikaTop®-50 is an acrylic water-based primer specially designed for absorbent wall surfaces such as plaster, porous cement plasters, and masonry. It prevents fluid loss from plasters and provides excellent adhesion...

2-component polyurethane, matte, sealing coating, part of Sika flooring systems Sikafloor®-304 W is a two-component water-based polyurethane coating with low VOC content. It is designed for matte sealing of Sikafloor®...

Sikafloor®-150 is a two-component epoxy resin with low viscosity, designed for priming and leveling concrete and cement surfaces. An ideal choice for a primer under epoxy and polyurethane flooring systems,...

Sika MonoTop®-612 is a 1-component, fiber-reinforced, structural repair mortar containing microsilica powder that meets the requirements of class R4 according to EN 1504-3. Easy to apply Ready to use, only...

Sika MonoTop®-610 is a cement-based, polymer-modified one-component formulation containing silicon dioxide, which is used as a bonding primer (bonding bridge between old and new concrete) and to protect reinforcement from...

Sikalastic®-612 is an economical, single-component polyurethane waterproofing membrane designed for waterproofing of exposed roofs, as well as under tiles on balconies and terraces. It can be used in roofing systems...

Sikafloor® ProSeal-12 is an acrylate solution designed for the impregnation and sealing of fresh or cured concrete. It prevents dusting, increases the hardness and wear resistance of concrete surfaces, while...

Sikafloor®-2510 W is a two-component, colored, multifunctional water-based epoxy floor coating with low emissions of volatile organic compounds (VOCs), suitable as a primer, smooth or textured coating. It provides good...

SikaMembran® Window Outside is a flexible membrane equipped with a pressure-sensitive tape for quick and effective installation. The diffusion-open membrane ensures safe transport of moisture to the colder part of...

SikaMembran® Window Inside is a flexible membrane equipped with a pressure-sensitive tape for quick and effective installation. The diffusion-open membrane ensures safe transport of moisture to the colder part of...

SikaTop® Seal-107 is a two-component polymer-modified waterproofing cementitious mortar, which consists of a liquid polymer and a dry cement mixture containing special additives.

SikaTop® Seal-107 Elastik is a two-component, polymer-modified, elastic waterproofing solution consisting of a liquid polymer and a cement composition with special additives. Easy application with a brush or fine plastering...

Sikalastic-685 is a single-component elastomeric liquid bitumen membrane based on water, designed for waterproofing roofs. This product provides exceptional protection against water while maintaining its elasticity even at high temperatures...

SikaShield® P32 PE 2.5 kg/m² is an APP modified bitumen membrane used for waterproofing flat roofs under a protective layer or ballast, as well as reinforced concrete slabs. It serves...

Sikadur®-504 is a specially selected quartz sand used as component C in self-leveling epoxy systems Sikafloor®, such as Sikafloor®-261 and Sikafloor®-325. It serves as a filler for industrial coatings and...

Solvent-free, thick-layer, 2-component, liquid, epoxy-polyurethane coating for creating solid-elastic, waterproof coatings with high mechanical resistance on steel and concrete. Solvent-free according to.The Directive for Protective Coatings of the German Association...

Primer based on epoxy resin in accordance with ZTV-ING for reinforced concrete bridge slabs and other engineering structures, part of a waterproofing system in combination with SikaCor® Elastomastic TF 2-component...

TASKI Jontec Best F4e is a professional low-foaming and neutral cleaning agent for degreasing floor coverings. Thanks to its effective formula, it excellently removes oils, greases, and everyday dirt without...

TASKI Jontec Matt F2f is a high-quality floor emulsion that creates a protective film with a medium gloss, which is easy to maintain and clean. It is suitable for use...

TASKI Jontec Matt F2f is a high-quality floor emulsion that creates a protective film with a medium gloss, which is easy to maintain and clean. It is suitable for use...

TASKI Jontec ESD is a high-quality antistatic floor emulsion specifically designed for areas sensitive to electrostatic discharge (ESD). It creates a long-lasting protective film that effectively reduces the risk of...

Sikafloor®-400 N Elastic is a single-component, highly elastic polyurethane coating, resistant to UV rays and weather influences. Ideal for waterproofing balconies, terraces, pedestrian areas, and floors with light to moderate...

SikaTop®-10 is a water-based primer with a styrene-acrylic copolymer base, designed for cement and mineral surfaces. Suitable for use as a primer before applying SikaDecor®-803 Nature, it provides excellent adhesion...

Polymer-modified cementitious mortar for reprofiling before the application of microcement solutions SikaDecor®-803 Nature is a two-component polymer-modified cementitious mortar designed for leveling and reprofiling surfaces before the application of microcement...

Sikafloor®-359 N is a two-component, solid-elastic polyurethane sealing floor coating with good mechanical, UV, and chemical resistance. Suitable for industrial floors and systems with topping, including parking lots, ramps, warehouses,...

Sikafloor®-264 N is a two-component, colored epoxy resin that provides high wear resistance and an easy-to-maintain surface. Ideal for concrete and cement screeds in areas with moderately heavy loads, such...

Sikafloor®-169 is a 2-component, low-viscosity, transparent epoxy binder with a low degree of yellowing, for mortars, screeds, and sealing coatings. Suitable for indoor use under normal to heavy and very...

SikaCor®-950 F is a two-component epoxy coating with low solvent content, designed for the protection of concrete and steel in underground and underwater structures. It provides exceptional resistance to water,...

Sikagard®-720 EpoCem® is a three-component epoxy-modified solution designed for leveling and finishing of concrete and stone surfaces. It provides excellent protection in aggressive chemical environments and can be applied on...

Sikagard®-905 W is a ready-to-use water-based moisture-proof resin designed to protect plasters, bricks, and stone from efflorescence and moisture. The product penetrates deeply into the substrate, prevents the development of...

Sikagard®-905 W is a ready-to-use water-based moisture-proof resin designed to protect plasters, bricks, and stone from efflorescence and moisture. The product penetrates deeply into the substrate, prevents the development of...

Sikagard®-703 W is a water-repellent impregnator based on silane/siloxane, a ready-to-use emulsion that provides protection for facades and masonry against water penetration. Suitable for application on mortar, bricks, stone, and...

Sikagard®-700 S is a one-component siloxane-based impregnator designed for cementitious substrates. It penetrates deeply into open pores, creating a long-lasting, breathable protective barrier. Suitable for concrete, masonry, natural stone, and...

Sikafloor®-2640 is a two-component, epoxy, colored, and lightly textured floor coating and sealant. It provides a wear-resistant, seamless, and easy-to-maintain glossy finish that is slip-resistant when various sizes of aggregates...

Sikagard®-680 S Betoncolor is a one-component, solvent-based coating that is resistant to weathering, alkalis, and aging, based on methacrylic resins. It is available in a transparent and colored variant for...

Sika AnchorFix® Perforated Sleeves for plastic perforated sleeves for anchoring in hollow bricks/masonry in combination with chemical anchors Sika AnchorFix®.

Sika AnchorFix®-3030 is a high-performance epoxy anchoring adhesive, designed for maximum reliability and durability under heavy loads. This chemical anchoring solution is ideal for anchoring steel rods and bolts in...

Meet Sika AnchorFix®-1 - the fast-curing anchoring adhesive that changes the rules of the game in installation and repair work. This chemical anchoring solution is designed to offer reliability and...

Sika AnchorFix®-2+ is a high-performance, two-component anchoring adhesive based on epoxy-acrylate, specially designed for securing anchors and reinforcements in concrete and masonry. It contains no solvents or styrene. With its...

SikaBond®-130 Design Floor is a 1-component, solvent-free, fiber-reinforced dispersion adhesive. Easy to spread Low consumption / high coverage Reinforced with fibers

SikaBond®-150 Premium Floor is a one-component, solvent-free, universal contact dispersion adhesive. Easy to spread Low consumption / high coverage High initial and final adhesion strength

SikaMur® InjectoCream-100 is a new concept for controlling rising moisture. SikaMur® InjectoCream-100 is a water-repellent cream product in soft packaging of 600 ml or bottles of 300 ml. The material...

Sikadur®-52 TR is a two-component, solvent-free, low-viscosity injection liquid based on high-strength epoxy resin. Does not contain solvents Suitable for both dry and wet conditions Can be used at low...

Flexible cement adhesive for floor or wall ceramic tiles, for internal and external use, with high slip resistance and long open working time.Classification according to EN 12004: C2TE S1 SikaCeram®-225...

Flexible cement polymer-modified adhesive for floor or wall ceramic tiles, for internal and external use, with slip resistance and long open time. Classification according to EN 12004: C2TE SikaCeram®-220 is...

High-quality cement polymer-modified adhesive for floor or wall ceramic tiles, for internal and external use, with slip resistance. Class C2T according to EN 12004 SikaCeram®-215 is a ready-to-use cement mixture...

High-quality cement adhesive for floor and wall ceramic tiles, for internal and external use, with high slip resistance and extended open time for work. Class C1TE according to EN 12004...

Sikadur®-42 HE is a 3-component, high-strength, high-quality, moisture insensitive, epoxy, bonding system. For use at temperatures between +5 °C and +30 °C. High early strength and fast curing Can be...