MC-Color Primer – dispersion primer for concrete, 10 l
MC-Color Primer is a ready-to-use, water-based copolymer dispersion primer for mineral substrates before compatible MC-Color protective coatings. It dries to a transparent consolidating film. Supplied in a 10 l pail. Applications Alkaline and neutral mineral substrates, concrete, fine fillers, aerated concrete and fibre cement. Sound existing coatings after compatibility checks. MC-Color Flair pure/pro and MC-Color...
- Ексклузивни отстъпки за големи количества.
MC-Color Primer is a ready-to-use, water-based copolymer dispersion primer for mineral substrates before compatible MC-Color protective coatings. It dries to a transparent consolidating film. Supplied in a 10 l pail.
Applications
- Alkaline and neutral mineral substrates, concrete, fine fillers, aerated concrete and fibre cement.
- Sound existing coatings after compatibility checks.
- MC-Color Flair pure/pro and MC-Color Flex pure/pro/vision systems.
Technical details
| Product code | 61290010240101000 |
|---|---|
| Typical consumption | 100–150 ml/m² |
| Aerated concrete and sand-lime substrates | 500–600 ml/m² |
| Application temperature | +5 to +30 °C |
| Relative humidity | Below 85% |
| Substrate/dew-point margin | At least 3 °C |
| Overcoating absorbent substrates | Approx. 60 min |
| Overcoating non-absorbent substrates | Approx. 4 h |
Application and important conditions
Check substrate soundness, cleanliness and absorbency; remove weak material.
Apply evenly by brush, roller or airless spray. The material is ready for use.
Allow the primer to dry before applying the next coat. Stated times are indicative at +21 ±2 °C and 50% relative humidity. Rain resistance is reached after approximately 4–6 hours.
Related categories
More information about MC-Color Primer – dispersion primer for concrete, 10 l
Frequently asked questions
Can it be used as the only protective layer?
It is a primer within the specified MC-Color systems and does not replace the final protective coating.
What area does a 10 l pail cover?
Theoretical coverage is approximately 67–100 m² at 100–150 ml/m², or 17–20 m² at 500–600 ml/m². Texture and wastage reduce actual coverage.
Is the finish transparent?
Yes, after drying. Its function is to prepare and consolidate the substrate before the next coating.