Concrete Repair Mortars

Choose concrete repair mortars from Sika and MC-Bauchemie to suit the damage and the repair location. This category includes materials for rebuilding spalled concrete, fine surface levelling, bonding coats and reinforcement protection. Consider repair depth, surface orientation, service conditions and the requirements of any subsequent coating to select the right product for the job.

Sort by:
Sika MonoTop®-612 - ремонтен разтвор за бетон клас R4 до 30 мм

Sika MonoTop®-612 - R4 Concrete Repair Mortar up to 30 mm

Цена по запитване
Този продукт вече не се предлага. Заместител по актуална информация от Sika: Sika MonoTop®-412 RS.
Sika MonoTop®-610 - циментов свързващ грунд и защита на армировка

Sika MonoTop®-610 - Cementitious Bonding Primer and Rebar Protection

Цена по запитване
Sika MonoTop®-610 е 1-компонентен циментов разтвор за свързващ грунд и защита на армировката от корозия. Използва се като свързващ мост стар-нов бетон в Sika MonoTop® ремонтни системи.
MC-Bauchemie Nafufill EC 6 ECC fine filler for concrete in the original 20 kg bag

Nafufill EC 6 – ECC fine filler for concrete / 20 kg

Цена по запитване
Nafufill EC 6 is an epoxy-cementitious (ECC) fine filler for levelling and filling pores in concrete and other cement-bound substrates. It is suitable for interior and exterior work, including use...
Nafufill KM 130 – опаковка 25 кг

Nafufill KM 130 – PCC разтвор за хоризонтални бетонни повърхности / 25 кг

Цена по запитване
Nafufill KM 130 е еднокомпонентен, полимерно-модифициран PCC разтвор за възстановяване на хоризонтални бетонни повърхности в конструктивни и неконструктивни елементи.Области на приложение Възстановяване на динамично натоварени бетонни повърхности. Конструктивно възстановяване на...
Nafufill KM 220 – опаковка 25 кг

Nafufill KM 220 – фиброармиран разтвор за възстановяване на бетон / 25 кг

Цена по запитване
Nafufill KM 220 е еднокомпонентен, полимерно модифициран и армиран с фибри разтвор за възстановяване и фино изравняване на бетон. Нанася се ръчно или чрез мокро пръскане и може да се...
Nafufill BC – опаковка 20 кг

Nafufill BC – минерален свързващ слой за възстановяване на бетон / 20 кг

Цена по запитване
Nafufill BC е минерален свързващ слой на циментова основа за системи за възстановяване на бетон. Смесва се само с вода и се нанася с четка като суспензия или чрез пръскане...
Nafufill KMH – опаковка 20 кг

Nafufill KMH – антикорозионно покритие и свързващ слой / 20 кг

Цена по запитване
Nafufill KMH е еднокомпонентно покритие за активна защита от корозия на открита армировъчна стомана и свързващ слой в системи за възстановяване на бетон. Смесва се само с вода и е...
Nafufill KM 250 – опаковка 25 кг

Nafufill KM 250 – фиброармиран PCC/SPCC разтвор за ремонт на бетон / 25 кг

Цена по запитване
Nafufill KM 250 е еднокомпонентен, огнеустойчив и армиран с фибри PCC/SPCC разтвор за възстановяване на конструктивни и неконструктивни бетонни елементи. Може да се полага ръчно или машинно чрез мокро пръскане.Области...
Nafufill KM 110 – опаковка 25 кг

Nafufill KM 110 – фин разтвор за изравняване на бетон / 25 кг

Цена по запитване
Nafufill KM 110 е еднокомпонентен, полимерно модифициран PCC фин разтвор за изравняване на бетонни повърхности. Може да се нанася ръчно или чрез мокро пръскане.Области на приложение Изравняване на неравни и...
Sika MonoTop®-620 - изравнителен разтвор и запечатка на пори R3 до 5 mm

Sika MonoTop®-620 - R3 Leveling Mortar and Pore Sealer up to 5 mm

Цена по запитване
Sika MonoTop®-620 е полимермодифициран изравнителен разтвор и запечатка на порите, клас R3. Използва се за финишна обработка на бетон, тънкослойна шпакловка 1.5-5 mm и ремонт на малки дефекти.
Sika MonoTop®-412 RS е фиброармиран ремонтен разтвор клас R4 по EN 1504-3 за възстановяване на бетон до 50 мм в слой.

Sika MonoTop®-412 N RS - R4 Concrete Repair Mortar up to 50 mm

Цена по запитване
Sika MonoTop®-412 N RS е фиброармиран ремонтен разтвор клас R4 по EN 1504-3 за възстановяване на бетон до 50 мм в слой. Подходящ е за сгради, мостове и инфраструктура, когато е нужен здрав ремонт с ниско съсъхване и добро сцепление към бетон и армировка.
SikaTop® Armatec®-110 EpoCem® - грунд и антикорозионна защита на армировка

SikaTop® Armatec®-110 EpoCem® - bonding primer and reinforcement corrosion protection

Цена по запитване
SikaTop® Armatec®-110 EpoCem® е 3-компонентен цименто-епоксиден състав с корозионен инхибитор. Използва се като свързващ грунд и защита на армировката при ремонт на бетон.

Choosing the right material for concrete repair

Concrete repair products serve different purposes. A mortar that replaces missing concrete is not the same as a fine fairing compound, while bonding coats and reinforcement protection have separate roles. Start with the defect so you can compare products intended for the same task.

Rebuilding spalled concrete and damaged edges

A repair mortar restores the missing volume and profile where concrete has spalled or edges have broken away. The choice depends on repair depth and whether the material will be applied horizontally, vertically or overhead.

Stairs, balcony edges, columns and beams can have similar-looking damage but require different repairs. Consider the condition of the substrate, the loads involved and the element’s structural function rather than choosing by appearance alone.

Filling pores and levelling the surface

A concrete fairing compound fills pores and smooths minor surface irregularities. Sika MonoTop®-620 is a product for this type of work. Surface finishing is different from rebuilding a damaged section, where missing concrete must be replaced first.

Nafufill KM 110 is also a fine finishing material for areas not exposed to pedestrian or vehicle traffic. A smooth finish does not, on its own, make a material suitable as the exposed wearing surface of a floor or stair tread.

Bonding coats and reinforcement protection

A bonding coat promotes adhesion between the substrate and the repair mortar. Reinforcement corrosion protection serves a different purpose. Some products perform both functions, but neither function replaces the mortar needed to rebuild missing concrete.

Sika MonoTop®-610, SikaTop® Armatec®-110 EpoCem® and Nafufill KMH are used as bonding coats and for reinforcement corrosion protection. Nafufill BC is a mineral bonding coat, not a reinforcement corrosion protection product.

Not every repair mortar requires a separate primer. Select components according to the specified system; products with similar functions are not automatically interchangeable.

What determines the choice of repair mortar?

Repair depth and substrate condition

Choose for the area that needs rebuilding, not just the damage visible before preparation. Removing unsound concrete can change the dimensions of the repair, affecting both product selection and the quantity required.

Check that the mortar is intended for the actual repair depth and application method. A fine finishing material does not replace a mortar for deeper repairs. Equally, a mortar used to rebuild a section may need a separate finishing layer before paint or another coating is applied.

Vertical, overhead and horizontal applications

For walls and soffits, choose a mortar specifically intended for vertical or overhead application. Thixotropic behaviour helps the material stay in place rather than slump, but suitability still needs to be checked for the exact product.

Sika MonoTop®-612 is a repair mortar with vertical and overhead applications. Nafufill KM 130 is intended for horizontal concrete surfaces. Surface orientation is therefore a useful first filter before comparing class, price and other properties.

On stairs, assess treads, risers and undersides separately. These surfaces may need different approaches even though they belong to the same element.

Traffic and exposure conditions

Repairing a floor used by vehicles is a different task from smoothing a wall. Establish whether the repair will remain exposed or sit beneath a coating designed for the intended service conditions.

For external repairs, consider water and weather exposure. Restoring the shape of a balcony or staircase does not automatically address water ingress. The intended use and any protection needed after the repair should inform the choice of materials from the outset.

Understanding R3 and R4 repair mortar classes

R3 and R4 are repair mortar classes under EN 1504-3 with different performance requirements. They are not a universal ranking in which R4 is always the better choice. The material must suit the existing concrete and the purpose of the repair.

When comparing products such as Sika MonoTop®-412 N RS and Nafufill KM 250, consider the intended application, substrate compatibility and system requirements rather than class or bag price alone.

Structural repairs or significant reinforcement corrosion require assessment by a structural engineer. For local surface fairing, the condition of the concrete surface and the requirements of the next layer are the main selection criteria.

When are other materials needed?

Cracks, grouting and void filling

Active or water-bearing cracks cannot simply be covered with repair mortar. The treatment depends on movement, crack depth and the presence of water, and may involve injection. See crack and joint filling materials where cracking or leakage is the main issue.

Grouting is a separate application, too. Choose suitable grouting mortars for the intended work rather than assuming a mortar for spalled concrete can be used for every type of structural filling or grouting task.

Protective finishes and subsequent coatings

Concrete reinstatement and surface protection are different stages. A repair may need protective coatings, a waterproofing system or suitable floor coatings. The choice depends on water exposure, traffic and other service conditions.

Nafufill EC 6 is a specialist ECC fairing compound for areas without pedestrian or vehicle traffic, with a specific system role beneath reactive resin coatings. It is not a general-purpose waterproofing product, and compatibility with an epoxy coating must not be assumed. Check the complete, specified combination of materials.

For products used in related substrate preparation and treatment work, see the wider concrete products range.

Calculating quantities and the total repair cost

The price per bag is not enough to compare complete repairs. Two areas of the same size can require different quantities when their repair depths differ. An estimate based on photographs and visible dimensions is provisional until the actual volume to be reinstated is established.

Use the repair area, depth and the selected product’s consumption information for the relevant application. Calculate areas with different depths separately rather than treating the entire surface as uniform.

Include preparation, exposed reinforcement treatment, required system components, repair mortar, any fairing layer and final protection in the overall cost. This allows you to compare complete solutions for the same task rather than individual packs.

What to include in a product enquiry

Send a concrete repair enquiry with close-up photographs and a wider view. Describe the location, surface orientation, approximate area and depth, exposed reinforcement, water exposure and traffic. Include the proposed subsequent coating and its exact product name where it has already been chosen. These details help identify suitable materials, the required components and the quantities to allow for.

Frequently asked questions about concrete repair mortars

Material selection, preparation and planning your repair.
How do I choose a concrete repair mortar?

Choose according to the defect, repair depth, surface orientation and expected loads. Also establish whether reinforcement is exposed, water is present and a subsequent coating is planned. Then compare products specifically intended for that application.

Is R4 always better than R3?

No. The appropriate class depends on the existing concrete and the requirements of the repair. Substrate compatibility and the structural purpose matter more than choosing the higher class alone. For structural repairs, follow the engineer’s specification.

Can a concrete fairing compound replace a repair mortar?

Not for rebuilding missing sections of concrete. A fairing compound fills pores and smooths minor surface irregularities, while a repair mortar restores lost volume and profile. Where spalling requires deeper reinstatement, choose the repair mortar first and add a fairing layer only where the finish requires it.

Which mortar is suitable for vertical and overhead repairs?

Choose a product specifically intended for vertical or overhead use, such as Sika MonoTop®-612. Thixotropic behaviour helps the mortar stay in place, but this property alone is not enough: the permitted application and suitability for the actual repair depth still need to be checked.

What is needed when reinforcement is exposed?

Exposed reinforcement must be assessed and treated as required by the selected repair system before the concrete is reinstated. Covering the steel with mortar does not, by itself, confirm that the necessary corrosion protection has been provided. Significant corrosion requires assessment by a structural engineer.

Can I fill a concrete crack with repair mortar?

Repair mortar is not an all-purpose crack treatment. Active or water-bearing cracks need a treatment selected for their condition, which may include injection. The decision depends on the cause of the crack, movement and water ingress, not simply its visible width.

Can these materials be used for floors and car parks?

Select a horizontal repair material suitable for the traffic and final finish. Nafufill KM 130 is intended for horizontal concrete surfaces, but suitability for the specific repair still needs checking. Fine materials such as Nafufill KM 110 and EC 6 are for areas without pedestrian or vehicle traffic.

How much material will I need, and what will the repair cost?

Calculate quantities using the area, actual repair depth and the chosen product’s consumption information for the application. The total cost also includes preparation, any reinforcement treatment, a bonding coat where required and subsequent coatings. Area alone or the price per bag cannot provide an accurate total.