MC-Bauchemie Products
Centrament Proof CP 10 – кристализираща добавка за водонепропусклив бетон / 18 кг
Emcekrete 60 A – high-strength cementitious grout, 25 kg
Glasperlen 100–200 µm – стъклени перли / 5 кг
Glasperlen 200–300 µm – стъклени перли / 5 кг
Intec IENTLSL – обезвъздушителен маркуч / ролка 50 м
Intec Standard IVINTECN – инжекционен маркуч / ролка 100 м
MBC-VT 116 – термоустойчива епоксидна смола / 30 кг
MC-Color Flair pure – пигментирано защитно покритие / 15 l
MC-Color Primer – dispersion primer for concrete, 10 l
MC-Color Proof pro – прозрачно защитно покритие за бетон / 15 l
MC-Color Proof pure – прозрачен импрегнатор / 15 l
MC-Color T 21 – високоефективно защитно покритие / 15 l
MC-Dekorchips M1 – декоративен чипс / 5 кг
MC-DUR 1177 WV-A – epoxy primer and impregnation, 10 kg
MC-DUR 1322 – epoxy floor coating, component A, 30 kg
MC-DUR TopSpeed M – бърз матов прозрачен запечатващ слой / 10 кг
MC-DUR TopSpeed – бързо подово покритие, стандартни цветове / 10 кг
MC-Fast Tape – elastic waterproofing tape, 10 m
MC-Flex MS Polymer Fix & Seal – grey adhesive and sealant, 280 ml
MC-FLEX PU 22 Construct – polyurethane sealant, 280 ml
MC-FLEX PU 22 Construct – polyurethane sealant, 600 ml
MC-Injekt 1264 compact – твърда инжекционна епоксидна смола / комплект 12,5 l
MC-Injekt 2300 flow – еластична инжекционна смола / комплект 20 l
MC-Injekt PowerSeal R – водоспираща експандираща инжекционна смола / 10 l
MC-Injektionspacker PA10110DUO – алуминиев високонапорен пакер 10 × 110 mm / 150 бр.
MC-Proof DF 10 – супереластична дисперсна хидроизолация / 10 кг
MC-Proof DF 10 – супереластична дисперсна хидроизолация / 2,5 кг
MC-Stellmittel TX 19 – тиксотропираща добавка / 1 кг
Mycoflex 251 – универсален грунд за фугопълнители / 1 l
Mycoflex 4100 TS – бърз специален грунд за фугопълнители / 1 кг
Nafufill BC – минерален свързващ слой за възстановяване на бетон / 20 кг
Nafufill EC 6 – ECC fine filler for concrete / 20 kg
Nafufill KM 110 – фин разтвор за изравняване на бетон / 25 кг
Nafufill KM 130 – PCC разтвор за хоризонтални бетонни повърхности / 25 кг
Nafufill KM 220 – фиброармиран разтвор за възстановяване на бетон / 25 кг
Nafufill KM 250 – фиброармиран PCC/SPCC разтвор за ремонт на бетон / 25 кг
Nafufill KMH – антикорозионно покритие и свързващ слой / 20 кг
Nafuflex Basic 1 – бързосъхнеща битумна хидроизолация / 30 l
Nafuflex Easy Tech 1 – пръскаема битумна хидроизолация / 30 l
ombran ASP – cementitious waterproofing slurry, 25 kg
ombran IW – бърз разтвор за хидроизолиране на площни инфилтрации / 10 кг
ombran W – бърз разтвор за спиране на локални водни течове / 15 кг
Quarzsand 0.1–0.3 mm – кварцов пясък / 25 кг
Quarzsand 0.3–0.8 mm – кварцов пясък / 25 кг
Quarzsand 0.5–1.2 mm – кварцов пясък / 25 кг
MC-Bauchemie is an international manufacturer of construction chemicals and systems for concrete, repair, waterproofing, injection, flooring, joints and surface protection. This collection brings together the MC-Bauchemie products and corresponding system accessories offered in our catalogue, identified by their exact product codes.
Choosing MC-Bauchemie products
Choose by the problem and the product’s system role, not the brand name alone. Browse Nafufill for concrete repair, Nafuflex for bituminous waterproofing, MC-Injekt for injection of cracks, voids and leaks, and MC-DUR and MC-Color for flooring and concrete protection respectively.
| Task | What to establish | Product examples |
|---|---|---|
| Concrete repair and protection | Reinforcement, defect type and depth, orientation and loads | Nafufill KMH, Nafufill KM 250 |
| Waterproofing | Substrate, water exposure, access and subsequent covering | Nafuflex Basic 1, MC-Proof DF 10 |
| Injection and water stopping | Active water, crack width and movement, voids and equipment | MC-Injekt 2300 flow, MC-Injekt PowerSeal R |
| Flooring and surface protection | Substrate, service loads, finish and working time | MC-DUR TopSpeed, MC-Color Proof pro |
| Joints and system materials | Joint type, substrate, compatible primer, filler and sequence | Mycoflex 251, Quarzsand 0.3–0.8 mm |
| Concrete admixtures | Mix design, dosage, mixing procedure and project requirements | Centrament Proof CP 10 |
How to select the right product
- Define the task: repair, surface waterproofing, injection, flooring, protection or a system accessory.
- Describe the substrate and defect: concrete, masonry or another substrate; a crack, void, corrosion, leak or surface wear.
- Check conditions: water, temperature, interior or exterior application, loads and required working time.
- Verify the exact code: use current TDS and SDS documents for the particular product and pack, without transferring parameters from a similar material.
For an accurate quotation: send the product name and code, pack, quantity, delivery location and a brief description or photographs of the site. Store prices are provided on enquiry.
Before application, use the current data sheet and safety information for the exact code. See the official MC-Bauchemie Bulgaria documents.
System accessories and manufacturer
Intec accessories are MAX FRANK products and are included here as part of the offered injection-system assortment. Check the manufacturer and compatibility for the exact component.
To choose by task, browse concrete repair, waterproofing, cracks and joints, floor coatings and protective coatings.
Frequently asked questions about MC-Bauchemie
Are MC-Bauchemie and its Bulgarian spelling the same brand?
Yes. The Bulgarian spelling is used on the company’s official Bulgarian website, while MC-Bauchemie is the international brand spelling. Our catalogue uses the international spelling and preserves exact product names and codes.
Which MC-Bauchemie products are in this collection?
The collection includes concrete repair and reinforcement protection products, waterproofing, injection resins, floor and protective coatings, joint primers, concrete admixtures and system materials. The main ranges are Nafufill, Nafuflex, MC-Proof, MC-Injekt, MC-DUR, MC-Color, Mycoflex, ombran and Centrament.
Which MC-Bauchemie range is suitable for concrete repair?
Nafufill covers different repair roles: reinforcement corrosion protection, bonding layers, repair mortars and fine levelling mortars. Select the particular product according to orientation, damage depth and type, loads, exposure and the current data sheet.
When are Nafuflex, MC-Proof DF 10 and MC-Injekt used?
Nafuflex is a range of bituminous thick coatings; MC-Proof DF 10 is a dispersion waterproofing product; MC-Injekt is used for injection of cracks, voids, joints and water-affected areas. They are not interchangeable: selection depends on access, substrate, water exposure and whether the task is surface sealing or injection.
How do I choose the right MC-Injekt resin?
First define the objective: stopping active water, flexible sealing or rigid crack bonding. Then check the structure material, moisture, crack width and movement, expected water exposure and injection equipment. Confirm selection against the current data sheet.
Where are data sheets and safety documents available?
Start with the specific product’s technical description and check current MC-Bauchemie documents for the same name and code. Use the current TDS for design or application and the current SDS for safe handling. Do not transfer parameters from a similar product or another pack.
How can I receive a price and quotation for an MC-Bauchemie product?
Send an enquiry from the product page, stating the exact name, product code, pack, quantity and delivery location. For technical selection, add the structure type, substrate, problem and photographs. This allows the quotation and subsequent price updates to be matched to the same code.
Can different MC-Bauchemie products be combined in one system?
Only when compatibility and layer sequence are confirmed in current technical documents or a project technical solution. A shared brand is insufficient. Check substrate, primer, intermediate layers, thicknesses, timing, application conditions and final loads.
