MC-DUR 1322 – epoxy floor coating, component A, 30 kg
MC-DUR 1322 is a pigmented two-component epoxy coating for industrial floors. This item is component A, 30 kg, in standard colours RAL 7032, RAL 7035 or RAL 7040. Component B must be specified separately in the enquiry; component A cannot be applied on its own. Applications Abrasion-resistant warehouse, production and workshop floors. Garage and car-park...
- Ексклузивни отстъпки за големи количества.
MC-DUR 1322 is a pigmented two-component epoxy coating for industrial floors. This item is component A, 30 kg, in standard colours RAL 7032, RAL 7035 or RAL 7040. Component B must be specified separately in the enquiry; component A cannot be applied on its own.
Applications
- Abrasion-resistant warehouse, production and workshop floors.
- Garage and car-park flooring systems.
- Smooth or slip-resistant finishes according to the specified system.
Technical details
| Product code | 51197400370101000 |
|---|---|
| System mixing ratio | A : B = 5 : 1 by mass |
| Mixed coating consumption | Approx. 1.5 kg/m² per mm |
| Working time | Approx. 45 min at +20 °C and 50% relative humidity |
| Application | +10 to +30 °C; relative humidity up to 85% |
| Substrate/dew-point margin | At least 3 °C |
| Foot traffic | Approx. 12 h at +20 °C and up to 80% relative humidity |
| Full loading | Approx. 7 days at +20 °C |
Application and important conditions
Prepare a sound, clean concrete substrate and install the specified primer and scratch coat. The system uses MC-DUR 1320 VK.
Mix the correct components at the exact ratio. Consumption and curing times refer to the properly mixed two-component system.
Slip-resistant finishes require the prescribed quartz filler and broadcast grading. Do not substitute arbitrary sand fractions.
UV exposure may cause colour changes. Curing times vary with temperature; readiness for foot traffic does not mean readiness for full loading.
Related categories
More information about MC-DUR 1322 – epoxy floor coating, component A, 30 kg
Frequently asked questions
Is this an A+B set?
No. The item and pricing unit cover 30 kg of component A. Component B is specified separately. The photograph shows both system components.
How do I select a colour?
State RAL 7032, RAL 7035 or RAL 7040 in your enquiry.
How much hardener is required?
The 5:1 ratio requires 6 kg of the correct component B for 30 kg of component A. This is a mixing calculation, not the contents of this item.