MC-DUR 1177 WV-A – epoxy primer and impregnation, 10 kg
MC-DUR 1177 WV-A is a two-component, water-dispersible epoxy resin for priming and impregnating concrete and cement screeds. It dries transparent. The 10 kg set contains 5.6 kg of component A and 4.4 kg of component B. Applications Priming beneath or over polymer-modified cementitious mortars (PCC) in compatible systems. Preparation for suitable reaction-resin seal coats. Concrete...
- Ексклузивни отстъпки за големи количества.
MC-DUR 1177 WV-A is a two-component, water-dispersible epoxy resin for priming and impregnating concrete and cement screeds. It dries transparent. The 10 kg set contains 5.6 kg of component A and 4.4 kg of component B.
Applications
- Priming beneath or over polymer-modified cementitious mortars (PCC) in compatible systems.
- Preparation for suitable reaction-resin seal coats.
- Concrete and screed impregnation and reducing moisture loss from fresh concrete.
Technical details
| Product code | 50750010190101000 |
|---|---|
| A:B mixing ratio | 56:44 by mass |
| Working time | Approx. 60 min at +20 °C and 50% relative humidity |
| Application temperature | +8 to +30 °C |
| Maximum relative humidity | 85% |
| Substrate/dew-point margin | At least 3 °C |
| Impregnation/curing consumption | Approx. 0.10–0.25 kg/m² |
| Foot traffic | Approx. 6 h at +20 °C and 50% relative humidity |
Application and important conditions
Prepare a sound, clean mineral substrate. A matt-damp surface is acceptable; standing water and puddles are not.
Mix both components at the specified ratio and apply evenly without pooling. Do not apply in rain or when rain is imminent.
Select consumption and quartz broadcast to suit the next layer. The initial coat beneath PCC uses approximately 0.2–0.4 kg/m²; impregnation requires less.
Allow the necessary drying period before overcoating. Suitable reaction-resin sealers normally require approximately 6–24 hours at +20 °C; follow the specific system requirements.
Related categories
More information about MC-DUR 1177 WV-A – epoxy primer and impregnation, 10 kg
Frequently asked questions
Does the A in WV-A mean component A only?
No. WV-A is part of the product name. This item is the complete 10 kg A+B set.
Can it be used on a slightly damp substrate?
Yes, on a properly prepared matt-damp mineral surface without standing water.
Is it a thick floor coating?
No. It is a primer, impregnation and curing aid. Select a separate finish for the required loading.