Concrete Products for Repair, Protection and Preparation
Choose concrete repair, protection and preparation products from Sika and MC-Bauchemie, alongside supporting Topciment materials. Explore repair mortars, impregnation treatments, primers, admixtures, joint products and anchoring solutions. Start with the task and substrate condition, then compare prices for the required packs and all components of the selected solution.
Категории продукти за бетон
Добавки, посипки, кофражни масла, импрегнатори, грундове и решения за бетонни фуги
Sikaflex®-11 FC Purform® - Elastic Adhesive and Joint Sealant
Sikaflex®-112 Crystal Clear - Transparent Adhesive and Sealant
Sikaflex®-118 Extreme Grab - high initial tack construction adhesive
SikaBond®-115 Strong Fix - Interior Mounting Adhesive
Sika BlackSeal® BT - Butyl Rubber Sealant and Adhesive
Sikafloor®-2 SynTop - Non-Metallic Hardener for Concrete Floors
Sikafloor®-169 - Transparent Epoxy Binder and Sealing Coat
SikaCor®-950 F - Epoxy Coating for Steel and Concrete Under Heavy-Duty Conditions
Sikagard®-907 W - Impregnator for Porous Paving and Sand Joints
Sikagard®-905 W - Impregnator and Surface Hardener Against Efflorescence
Sikagard®-703 W - Water-Repellent Facade Impregnator
Sikagard®-700 S - Water-Repellent Impregnation for Concrete and Facades
Sikagard®-680 S Betoncolor - Protective Coating for Concrete
Sika AnchorFix® Perforated Sleeves – for hollow masonry
Sika AnchorFix®-3030 - epoxy chemical anchor for heavy loads
Sika AnchorFix®-1 - Fast-Curing Chemical Anchor
Sika AnchorFix®-2+ - Chemical Anchor for Medium and Heavy Loads
ombran ASP – cementitious waterproofing slurry, 25 kg
MC-Color Primer – dispersion primer for concrete, 10 l
Emcekrete 60 A – high-strength cementitious grout, 25 kg
MC-DUR 1177 WV-A – epoxy primer and impregnation, 10 kg
Nafufill EC 6 – ECC fine filler for concrete / 20 kg
How to choose concrete products
Start with the job: are you preparing to pour concrete, repairing a damaged surface or protecting an existing structure? An admixture, repair mortar and protective coating work at different stages and serve different purposes. Understanding their roles makes it easier to select the materials you need and compare the cost of a complete solution.
For existing concrete, identify the problem first: dusting, water absorption, spalling, cracks, leaks or a damaged joint. Consider the loads, weather exposure and any subsequent finishes. These details are more useful for choosing a material than the appearance of the surface alone.
This collection brings together Sika and MC-Bauchemie products and supporting Topciment materials for preparing, repairing, treating and protecting concrete substrates. Browse by application or use the brand and product-type filters. Some materials are system components or are applied over an intermediate layer, so their inclusion here does not mean they can be applied directly to every concrete surface.
Admixtures, release agents and fresh concrete care
Admixtures for the concrete mix
Choose concrete and mortar admixtures according to the property you need to improve. Plasticisers and superplasticisers help with workability, while other admixtures are intended for particular placing conditions or reduced water permeability. Selection depends on the mix composition and the construction method. Compatibility must be checked before combining different admixtures.
A water-resisting admixture is only one part of the solution: joints, pipe penetrations and other details still require correct design and execution. Cold-weather concreting also calls for suitable site procedures and protection of the fresh concrete. Select and dose the admixture for the actual mix and placing conditions.
Formwork and protection after placing
Formwork release agents help separate the formwork from the concrete. Choose them for the formwork surface and the required concrete finish. For exposed architectural concrete, formwork cleanliness, even application and subsequent treatments also matter.
After placing, concrete needs appropriate care to prevent premature water loss. Products used for this purpose serve a different role from an impregnation treatment for a finished floor or a concrete coating. If bonding, rendering or coating will follow, check compatibility with the curing compound and the preparation needed for the next layer.
Dry-shake hardeners and concrete floors
Concrete dry-shake hardeners form part of the construction of particular concrete floor systems. Their application differs from painting an existing floor. Consider the future loads, indoor conditions, placing method and required finish when choosing a system.
For an existing garage, warehouse or workshop, assess the floor first. Contamination, weak concrete and cracking need attention before the final coating. If you need a new wearing or decorative layer, compare floor coatings according to traffic, cleaning requirements and exposure.
Repairing crumbling and damaged concrete
For chipped edges, damaged concrete cover or local defects, consider concrete repair mortars. Materials for rebuilding missing concrete, fine levelling and preparation before a protective coating have different roles. Choose the mortar according to the repair, surface orientation and subsequent layers.
Sealing the surface is not enough to restore every type of crumbling concrete. Identify weak and loose areas and establish the cause of the damage. Exposed corroded reinforcement or concerns about load-bearing capacity call for a structural assessment. Surface treatment does not replace the necessary structural repair.
A primer, reinforcement corrosion protection, bonding layer and repair mortar each have a specific function within a repair system. For filling beneath machinery, baseplates or other elements, see grouts and underfill materials; these applications differ from cosmetic surface levelling.
Impregnation treatment, sealer or protective coating
When choosing concrete impregnation treatments and sealers, define the effect you want. A hydrophobic impregnation treatment reduces water absorption in a suitable absorbent substrate. Other products are selected for surface consolidation or sealing. The name “impregnation treatment” alone does not establish the finish, behaviour or suitability for a heavily used floor.
Protective concrete coatings form a separate protective layer and have their own substrate and service requirements. When looking for “concrete paint”, specify whether the surface is a façade, wall, garage floor or structure. A coating for vertical concrete may have a different purpose from a flooring system; check suitability for vehicle traffic or the relevant chemical exposure.
Also consider the appearance: clear or pigmented finish, gloss level and retention of the mineral texture. A small representative test area is useful for exposed concrete. Establish how the surface will be cleaned and what future maintenance or renewal will involve.
Primers and concrete substrate preparation
Choose a primer according to substrate condition, absorbency and the material to be applied over it. Contact primers and bonding bridges support adhesion in specific applications. A textured bonding primer, epoxy primer and sealant primer serve different purposes.
Dust, laitance, oil, weak layers and incompatible old coatings can affect the next treatment. Assess moisture for the selected system too. There is no single percentage that applies to all primers and coatings: the measurement method and requirements of the complete solution matter. Prepare a sound, stable substrate before applying the specified primer.
Cracks, joints, waterproofing and anchoring
A crack is a defect or a result of movement, while a joint may be an intentional construction detail. For filling cracks and joints in concrete, selection depends on the cause, movement and presence of water. Rigid filling, elastic sealing and injection address different needs. Stopping a leak and restoring load transfer across a crack are separate repair objectives. Active movement joints need a solution that accommodates the expected movement.
For below-ground structures and areas exposed to water, explore foundation and structural waterproofing and joint waterproofing. Coatings, tapes, connections and drainage need to work together. A rain-repellent impregnation treatment should not be assumed to resist water pressure.
For fastening elements to concrete, use suitable chemical anchors and accessories. Selection depends on the substrate, the element being fixed and the loads. Anchoring resins, assembly adhesives and grouts have different functions, even where all are used in fixing applications.
Concrete product prices and the cost of a complete solution
Compare materials by purpose and include the full scope of work. A low price per pack does not, on its own, show the cost of a repair or protective system. The budget may include preparation, primer, main material, a required second component, finishing coat and consumables. For two-component products, check whether the price covers the complete kit or a separate component.
To estimate a cost per m², use the selected products' consumption for the actual substrate and allow for pack sizes. Joints, anchoring and grouting require different quantity calculations, so a price per square metre is not appropriate for every task. Separate labour, site access and repairs from the material cost.
For a suitable proposal, send an enquiry with a description and photographs of the substrate, the area or dimensions, visible problems, service conditions and desired result. Specify whether you need materials alone or installation as well. This allows the selection to start with the actual project and a compatible combination of materials.
Frequently Asked Questions About Concrete Products
What should I use for a concrete surface that produces dust?
For sound concrete, choose a product intended to reduce dusting or a suitable flooring system. A water-repellent impregnation treatment may not serve this purpose. If the concrete is crumbling or loose layers are coming away, assess the necessary repairs first.
What is the difference between a concrete impregnation treatment and a coating?
A penetrating impregnation treatment acts within the pores, while a film-forming coating creates a surface layer. Some products described as impregnation treatments or sealers also form a film. Choose according to the required effect, substrate and permitted loads, rather than the name alone.
Can repair mortar solve a structural problem?
Repair mortar can form part of a structural repair, but filling visible damage alone does not establish that its cause has been resolved. Movement, developing cracks or concerns about load-bearing capacity call for assessment by a structural engineer and a defined repair solution.
Are the same products used for fresh and hardened concrete?
Only where the product permits both applications. Fresh-concrete curing products limit premature water loss, while treatments for existing concrete are chosen according to its condition and future use. Compatibility with subsequent coatings also needs to be checked.
Does a water-resisting admixture replace waterproofing?
An admixture is incorporated into the concrete mix, while applied waterproofing provides a separate protective layer on the substrate. The required solution depends on the structure and water exposure. Joints, penetrations and other vulnerable details must be considered regardless of the admixture selected.
Can joints and cracks be filled with the same material?
Selection depends on movement, the cause and the presence of water. An active movement joint needs a solution that accommodates movement. For a crack, establish the repair objective first. Elastic sealants, repair mortars and injection resins have different functions.
Is a primer always required before a repair or coating?
The substrate and selected system determine whether a primer is needed and which type to use. A bonding primer for repair mortar, a resin-coating primer and a joint-sealant primer are selected for different applications. Priming does not replace substrate preparation.
How should I compare concrete product prices?
Compare materials for the same task and check whether the price covers a pack, a complete kit or a separate component. Include the required supporting materials and substrate preparation. For products priced on enquiry, send a project description, dimensions and photographs for a specific quotation.
