Joint Waterproofing and System Components

Joint Waterproofing and System Components

ALL PRODUCTS
Sort by:
MC-FLEX PU 22 Construct – polyurethane sealant, 600 ml

MC-FLEX PU 22 Construct – polyurethane sealant, 600 ml

Цена по запитване
MC-FLEX PU 22 Construct is a one-component, moisture-curing polyurethane sealant for elastic building joints. Its thixotropic consistency suits both vertical and horizontal application. This item is one grey 600 ml...
MC-FLEX PU 22 Construct – polyurethane sealant, 280 ml

MC-FLEX PU 22 Construct – polyurethane sealant, 280 ml

Цена по запитване
MC-FLEX PU 22 Construct is a one-component, moisture-curing polyurethane sealant for elastic building joints. Its thixotropic consistency suits both vertical and horizontal application. This item is one grey 280 ml...
MC-Fast Tape – elastic waterproofing tape, 10 m

MC-Fast Tape – elastic waterproofing tape, 10 m

Цена по запитване
MC-Fast Tape is a flexible polyethylene waterproofing tape laminated with nonwoven fabric on both sides. It seals wall-to-floor junctions, wall corners and joints within compatible waterproofing systems. This item is...
Intec Standard IVINTECN – инжекционен маркуч, ролка 100 м

Intec Standard IVINTECN – инжекционен маркуч / ролка 100 м

Цена по запитване
Intec Standard IVINTECN е инжекционен маркуч за еднократно инжектиране със смоли в системи за уплътняване на работни фуги.Области на приложение Уплътняване на хоризонтални и вертикални работни фуги във водонепропускливи бетонни...
MC-Bauchemie Mycoflex 251 primer for joint sealants in the original 1 l bottle

Mycoflex 251 – универсален грунд за фугопълнители / 1 l

Цена по запитване
Mycoflex 251 е готов за употреба еднокомпонентен универсален полиуретанов грунд за фугопълнители и подобрител на адхезията.Области на приложение Грундиране на абсорбиращи основи преди уплътняване на фуги с продукти Mycoflex. Подобряване...
Intec IENTLSL breather tube for injection hose systems – product detail

Intec IENTLSL – обезвъздушителен маркуч / ролка 50 м

Цена по запитване
Intec IENTLSL е обезвъздушителен маркуч, системен компонент за Intec Premium и Intec Standard.Области на приложениеСистемен компонент за Intec Premium и Intec Standard според указанията на производителя.Основни характеристики Вътрешен диаметър 4...

Mycoflex 4100 TS – бърз специален грунд за фугопълнители / 1 кг

Цена по запитване
Mycoflex 4100 TS е бързосъхнещ двукомпонентен епоксиден грунд и свързващ слой за фугопълнители върху минерални и метални основи.Области на приложение Грунд за минерални основи при еластично уплътняване на повърхности с...
MC-Injekt 2300 flow – комплект 20 l

MC-Injekt 2300 flow – еластична инжекционна смола / комплект 20 l

Цена по запитване
MC-Injekt 2300 flow е дуктилно-еластична, трайно уплътняваща и реагираща с влагата полиуретанова инжекционна смола за бетон, зидария и строителни основи.Области на приложение Еластично запълване и уплътняване на пукнатини, строителни фуги...

MC-Injekt PowerSeal R – водоспираща експандираща инжекционна смола / 10 l

Цена по запитване
MC-Injekt PowerSeal R е еднокомпонентна, водоспираща и еластично уплътняваща експандираща смола за строителни основи, бетон и зидария.Области на приложение Еластично уплътняване на пукнатини, фуги и кухини във влажни бетонни и...
SikaSwell® S-2 - набъбващ полиуретанов уплътнител за фуги

SikaSwell® S-2 - Swellable Polyurethane Joint Sealant

Цена по запитване
SikaSwell® S-2 е 1-компонентен хидрофилен набъбващ полиуретанов уплътнител за конструктивни фуги и прониквания в бетон. Използва се и за фиксиране на SikaSwell® A/P профили и SikaFuko® Swell 1 маркучи.
SikaSwell® A - Акрилни набъбващи профили за уплътняване на фуги

SikaSwell® A - Acrylic Swelling Profile for Joints in Concrete

Цена по запитване
SikaSwell® A са акрилни набъбващи профили за конструктивни фуги, тръбни преминавания, метални елементи, кабелни канали и други прониквания в бетон. Набъбват при контакт с вода и подпомагат уплътняването.
SikaSwell® P Type H - водонабъбващ профил за конструктивни фуги

SikaSwell® P Type H - water-swellable profile for construction joints

Цена по запитване
SikaSwell® P Type H е хидрофилен набъбващ профил с каучукова EPDM сърцевина за конструктивни фуги и прониквания в бетон. При контакт с вода набъбва и уплътнява фуги, отвори за тръби и кабелни канали.

Select joint waterproofing according to joint type, movement, water and construction stage. The category includes waterstop systems, injection materials, primers and accessories. An individual component is not presented as a completed seal.

During concreting or repair of an existing joint

Plan embedded waterstops and injection hoses before concreting. Externally bonded tapes, flexible sealing and injection have different details and requirements. Construction and movement joints are not treated as the same case.

Systems and specific components

Sika Waterbar, SikaSwell and Sikadur-Combiflex remain separate system solutions. MC-Injekt PowerSeal R and 2300 flow have flexible sealing applications according to their exact data sheets. Intec Standard and IENTLSL are a hose and a system component, while Mycoflex 251 and 4100 TS are primers.

Information for technical selection

Specify width, movement, access, substrate, water pressure and any leak. For an injection system, compatible resin, hose, packer and equipment matter. Follow the documentation for the particular assembly.

Product examples from the catalogue

Each product has its own intended use and system limitations. Review the exact descriptions and data sheets:

Related categories

Send a technical enquiry with the area, photographs, substrate and service conditions.

Frequently asked questions: joint waterproofing and system components

Selection by application, preparation and technical requirements.
How is joint waterproofing selected?

By joint type, movement, water, substrate and construction stage. Select the system solution first, then its components.

Are construction and movement joints the same?

No. Expected movement and structural role differ. The profile, sealing and details must match the joint.

Are Mycoflex 251 and 4100 TS sealants?

They are primers and bonding components for specified systems in the catalogue. They do not replace the joint sealant or completed seal.

Is an injection hose sufficient on its own?

No. Installation, accessories, access and compatible injection material are part of the system. Check the permitted injection method as well.

Are flexible and rigid resins equivalent?

No. Flexible sealing and force-transmitting bonding have different objectives. Select according to the defect, movement and technical documentation.

Can any resin be used in Intec Standard?

Use a compatible material and specified method. The hose and components do not establish compatibility with every injection resin.

How are quantity and cost calculated?

From area, preparation, consumption of the specific layers and details. Compare the same scope of materials and installation.

Can products from different brands be combined?

Only with established compatibility for the particular system solution. Sharing a category does not establish that arbitrary materials work together.