Floor Coatings for Garages, Warehouses and Homes

Choose floor coatings for garages, warehouses, workshops, homes and terraces. Explore epoxy and polyurethane materials, microcement, self-levelling screeds, primers and sealers from Sika, MC-Bauchemie and Topciment. Browse the categories by application or use the brand and product-type filters to select suitable components for your flooring system.

Floor Coatings for Garages, Warehouses and Homes

ALL PRODUCTS
Sort by:
SikaDecor® Color - оцветители за микроцимент SikaDecor

SikaDecor® Color - Colorants for SikaDecor Microcement

Цена по запитване
SikaDecor® Color са пигменти за оцветяване на SikaDecor®-801 Nature микроцимент. Пигментът се добавя към течния компонент преди смесване с прахообразния компонент.
MC-DUR TopSpeed – комплект 10 кг

MC-DUR TopSpeed – бързо подово покритие, стандартни цветове / 10 кг

Цена по запитване
MC-DUR TopSpeed е бързовтвърдяващо, устойчиво на влага при полагане двукомпонентно ролково покритие за минерални основи и индустриални подове.Области на приложение Подово покритие върху минерални основи и индустриални подове. Компонент на...
Topciment Sttandard Microdeck M, 18 kg

Topciment Sttandard Microdeck M, 18 kg

€93,59
Cement-based microcement from the two-component Sttandard system, intended as a decorative finish for interior floors. It is applied in thin coats with a trowel over a stable, prepared substrate. The grain size determines its texture and role within the system.

Glasperlen 100–200 µm – стъклени перли / 5 кг

Цена по запитване
Glasperlen 100–200 µm са стъклени перли с означена фракция 100–200 µm.Области на приложениеИзползване в съвместима система и само според актуалната техническа документация на производителя.Основни характеристики Означена фракция 100–200 µm. Опаковка...

Glasperlen 200–300 µm – стъклени перли / 5 кг

Цена по запитване
Glasperlen 200–300 µm са стъклени перли с означена фракция 200–300 µm.Области на приложениеИзползване в съвместима система и само според актуалната техническа документация на производителя.Основни характеристики Означена фракция 200–300 µm. Опаковка...
MBC-VT 116 by MC-Bauchemie — epoxy primer for bridge deck waterproofing, packaging illustration

MBC-VT 116 – термоустойчива епоксидна смола / 30 кг

Цена по запитване
MBC-VT 116 е двукомпонентна, червено-прозрачна и термоустойчива епоксидна смола без разтворители за грундиране, шпакловане и хидроизолиране на бетонни повърхности.Области на приложение Грундиране, шпакловане или хидроизолиране на пътни плочи съгласно ZTV-ING,...

MC-Dekorchips M1 – декоративен чипс / 5 кг

Цена по запитване
MC-Dekorchips M1 е декоративен чипс, смес M1, за оформяне на съвместими подови покрития.Области на приложениеДекоративно посипване на подходящи подови системи според актуалната документация на производителя.Основни характеристики Декоративна смес M1. Опаковка...
MC-DUR TopSpeed M – комплект 10 кг

MC-DUR TopSpeed M – бърз матов прозрачен запечатващ слой / 10 кг

Цена по запитване
MC-DUR TopSpeed M е бързовтвърдяващ, устойчив на влага при полагане и матово-прозрачен запечатващ слой за подови системи.Области на приложение Повърхностно запечатване на епоксидни и полиуретанови подови системи. Приложение при неблагоприятни...

MC-Stellmittel TX 19 – тиксотропираща добавка / 1 кг

Цена по запитване
MC-Stellmittel TX 19 е пълнител и тиксотропираща добавка за регулиране на стабилността на съвместими реактивни смоли и лепила.Области на приложениеТиксотропиране на съвместими покрития и лепила в количества, определени в техническия...
Nafufill KM 130 – опаковка 25 кг

Nafufill KM 130 – PCC разтвор за хоризонтални бетонни повърхности / 25 кг

Цена по запитване
Nafufill KM 130 е еднокомпонентен, полимерно-модифициран PCC разтвор за възстановяване на хоризонтални бетонни повърхности в конструктивни и неконструктивни елементи.Области на приложение Възстановяване на динамично натоварени бетонни повърхности. Конструктивно възстановяване на...

Quarzsand 0.1–0.3 mm – кварцов пясък / 25 кг

Цена по запитване
Quarzsand 0.1–0.3 mm е кварцов пясък с означена фракция 0.1–0.3 mm за съвместими подови системи.Области на приложениеПълнене и посипване в съвместими системи от реактивни смоли, когато фракцията е посочена в...

Quarzsand 0.3–0.8 mm – кварцов пясък / 25 кг

Цена по запитване
Quarzsand 0.3–0.8 mm е кварцов пясък с означена фракция 0.3–0.8 mm за съвместими подови системи.Области на приложениеПосипване в съвместими системи от реактивни смоли, когато фракцията е посочена в техническата документация...

Quarzsand 0.5–1.2 mm – кварцов пясък / 25 кг

Цена по запитване
Quarzsand 0.5–1.2 mm е кварцов пясък с означена фракция 0.5–1.2 mm за съвместими подови системи.Области на приложениеПосипване в съвместими подови системи, когато фракцията е посочена в техническата документация на системата.Основни...
SikaDecor®-801 Nature - декоративен микроцимент за стени и подове

SikaDecor®-801 Nature - decorative microcement for walls and floors

Цена по запитване
SikaDecor®-801 Nature е двукомпонентен декоративен микроцимент за безфугови интериорни стени и подове. Използва се като финишен слой в SikaDecor система с правилен грунд, подготовка и запечатка.
SikaDecor®-803 Nature - изравняващ разтвор преди микроцимент

SikaDecor®-803 Nature - Leveling Mortar before Microcement

Цена по запитване
SikaDecor®-803 Nature е двукомпонентен полимер-модифициран разтвор за изравняване и репрофилиране преди микроциментни покрития. Подходящ е и за стари плочки, когато са стабилно залепени.
Sikadur®-504 - кварцов пясък 0.08-0.2 mm за подови системи

Sikadur®-504 Quartz Sand 0.08-0.2 mm for Flooring Systems

Цена по запитване
Sikadur®-504 е фин кварцов пясък 0.08-0.2 mm за индустриални подови системи. Използва се като системен пълнител или добавка в подходящи епоксидни и полиуретанови решения, когато е нужна контролирана фина фракция.
Sikafloor® Level-30 - саморазливна замазка за външно приложение 4-30 мм

Sikafloor® Level-30 - self-leveling screed for exterior use 4-30 mm

Цена по запитване
Саморазливна циментова замазка 4-30 мм за вътрешно и външно изравняване. За външни зони се използва само със съвместимо защитно покритие.
Sikafloor® ProSeal-12 - импрегнатор и запечатка за бетон

Sikafloor® ProSeal-12 – Concrete Impregnator and Sealer

Цена по запитване
Sikafloor® ProSeal-12 е акрилатен импрегнатор и запечатка за пресен или втвърден бетон. Подходящ е за гаражи, складове, работилници и бетонни подове, които прашат или попиват замърсявания, когато се търси икономична повърхностна защита без пълна епоксидна система.
Sikafloor®-102 Level - саморазливна замазка 2-15 мм

Sikafloor®-102 Level - self-leveling screed 2-15 mm

Цена по запитване
Sikafloor®-102 Level е полимер-модифицирана саморазливна циментова замазка за вътрешно изравняване на подове. Полага се в слой 2-15 мм преди плочки, PVC, килим или ламинат.
Sikafloor®-150 - епоксиден грунд за бетон и Sika подови системи

Sikafloor®-150 - Epoxy Primer for Concrete and Sika Flooring Systems

Цена по запитване
2К епоксиден грунд за бетон и циментови замазки при нормално до силно абсорбиращи основи. Подготовка за Sikafloor подови системи.
Sikafloor®-151 - епоксиден грунд за бетон с ниска до средна пориозност

Sikafloor®-151 - Epoxy Primer for Low to Medium Porosity Concrete

Цена по запитване
Нисковискозен 2К епоксиден грунд за бетон и циментови замазки с ниска до средна абсорбция. За Sikafloor епоксидни и PU системи.
Sikafloor®-1590 (ab) – бързовтвърдяващ епоксиден грунд за бетон и циментови замазки

Sikafloor®-1590 - Fast-Curing Epoxy Primer for Concrete

Цена по запитване
Sikafloor®-1590 е 2-компонентен бързовтвърдяващ епоксиден грунд със слаб мирис за бетон, циментови и епоксидни замазки преди Sikafloor подови системи.
Sikafloor®-169 - прозрачно епоксидно свързващо и запечатващо покритие

Sikafloor®-169 - Transparent Epoxy Binder and Sealing Coat

Цена по запитване
Sikafloor®-169 е прозрачно 2-компонентно епоксидно свързващо вещество и запечатка за Sikafloor Decodur системи, цветен кварцов пясък и подове с нормално до тежко натоварване.
Sikafloor®-2 SynTop - неметален втвърдител за бетонни подове

Sikafloor®-2 SynTop - Non-Metallic Hardener for Concrete Floors

Цена по запитване
Sikafloor®-2 SynTop е неметална синтетична посипка за бетонни подове с много висока износоустойчивост. Подходяща е за складове, фабрики, работилници, хангари, супермаркети, офиси и други подове с интензивна експлоатация.

How to choose a floor coating for your project

A floor coating needs to suit the substrate, the loads and the cleaning routine. In a home, appearance and ease of cleaning often come first. In a garage, warehouse or workshop, vehicle traffic, wear, spills and the time available before the floor returns to use may be decisive. Start with the conditions on site, then specify the material, thickness, colour and texture.

This category brings together floor coatings and system components from Sika, MC-Bauchemie and Topciment. The range includes resin coatings, decorative microcements, levelling materials, primers, pigments and sealers. Use the brand and product-type filters to distinguish the material you need from the other layers of a system. On each product page, check the intended use, pack contents and documents for the exact product name.

Epoxy and polyurethane floors: what is the difference?

Epoxy floor coatings

Epoxy flooring systems are a useful starting point when selecting a wear-resistant surface for garages, warehouses, workshops and production areas. Depending on the system, the finish may be a thin coating, a self-smoothing floor or a quartz-broadcast coating. These options have different consumption rates, thicknesses and load capabilities. They cannot simply be substituted for one another by changing the number of coats.

One example in the catalogue is Sikafloor-264 Plus, a two-component epoxy coating for interior use. Selection for a particular room requires checking the complete system and the actual exposure to oils, cleaning products or other substances. A general description such as “chemical-resistant” does not establish resistance to every concentration, temperature or contact time.

Polyurethane floor coatings

Polyurethane flooring systems offer different levels of flexibility, surface finishes and intended uses. Some are designed for interiors, while others suit outdoor areas or specific service conditions. Check UV resistance, permitted traffic, compatible primers and any required finishing coat for the exact product. The term “polyurethane” alone does not establish suitability for every terrace, ramp or industrial floor.

Sikafloor-304 W illustrates why this distinction matters: it is a matt polyurethane sealing coat with good UV resistance, yet its specified use is indoors. A suitable sealer is selected for the complete system, rather than treated as a universal way to change its intended use.

Do not choose between epoxy and polyurethane solely on a broad “hard versus flexible” distinction. The structure, substrate movement, system thickness, fillers and finish also affect the result. Two systems from the same chemical family may be intended for very different loads.

Microcement and self-levelling screed serve different purposes

Microcement flooring provides a decorative surface with a distinctive texture and a continuous appearance in residential and commercial interiors. Topciment systems use specific base and finishing materials, primers, colourants and protective finishes. Within the Sttandard and Unlimitted families, for example, the appropriate grade is selected for each layer. Materials labelled “microcement” are not all interchangeable.

The sealer affects the final sheen, cleaning and protection in use. It does not turn an arbitrary combination of microcement and sealer into a waterproofing system. In wet areas, the substrate, waterproofing and connections to drains and walls need separate consideration. Existing structural and movement joints must also be accounted for, even when the desired visual effect is a continuous surface.

Self-levelling cementitious screeds are primarily used for levelling and preparation within their stated applications. “Self-levelling” describes application behaviour; it does not automatically mean the material can withstand vehicle traffic or remain unprotected. For Sikafloor Level-30, for example, the application and loading determine the need for a subsequent coating. A levelling screed and a self-smoothing resin floor are different products.

Selecting a system for the room and its loads

For garages, car parks and ramps, specify the type and frequency of vehicle traffic, the condition of the concrete, slopes and areas exposed to water or contamination. A ramp or turning area may require a different texture from a parking bay. A coating intended for light pedestrian traffic should not be selected for vehicles merely because its colour is suitable.

For vehicle repair shops and workshops, include impacts, tools, oils and other substances actually used on site in the specification. In warehouses and working areas, consider loads, handling-equipment wheels, traffic routes and concentrated loading. The weight being carried does not, by itself, describe the pressure and wear applied to the floor.

In homes, shops and shared spaces, compare appearance, texture, walking comfort and maintenance. For stairs, also assess edges and landing details. In wet-process areas, selection must account for drainage, temperatures, cleaning and safe movement. Where the project requires a particular performance characteristic or classification, check the documentation for the specific system.

Outdoor terraces and balconies: coating, water and sunlight

Terrace and balcony floor coatings need to be assessed for UV exposure, temperature changes, water and pedestrian traffic together. Resistance to sunlight is insufficient if drainage or wall connections have not been addressed. For an exposed slab, establish which layer provides waterproofing and which provides the wearing surface.

Sikafloor-400 N Elastic is an example of a specific polyurethane coating used on balconies and terraces. Its intended use cannot be extended to every polyurethane product. Check permitted loading, substrate conditions and the required system layers. Where the main task is preventing water penetration, also consider the waterproofing systems.

Substrate preparation is part of the system

Before application, assess the strength and moisture content of the concrete or screed, cracks, joints and previous treatments. Cement laitance, dust, oils and weak layers can compromise adhesion. A washed surface is not necessarily ready for a resin coating: the required mechanical preparation method depends on its condition and the selected system.

When covering old tiles or an existing coating, first establish whether the substrate is sound and suitable for retention. Check adhesion, hollow areas, contamination and whether a trial area is needed. An unstable layer cannot be reliably repaired simply by applying a new finish. Cracks and joints require separate assessment; a moving joint must not be treated as an ordinary surface defect.

Select the primer for the exact substrate and subsequent layer. Check the permitted residual moisture and application conditions, including temperature and condensation risk. There is no single universal limit for all epoxy, polyurethane and cementitious products. Where rising moisture is suspected, investigate its cause before sealing the floor beneath a new coating.

Primer, main coating, broadcast aggregate and sealer

The primer supports adhesion to the substrate; the main coating forms the specified layer; suitable broadcast aggregate may contribute to texture and system build-up; and the sealer provides the specified surface finish. Not every system includes all these operations, but each has a defined sequence. Choose ancillary materials and broadcast aggregates to suit that sequence, rather than relying on a general product description.

In the catalogue, MC-DUR TopSpeed is a floor coating, while MC-DUR TopSpeed M is a transparent matt sealer for epoxy and polyurethane surfaces. Similar names do not mean identical functions. The same principle applies to different products within the Sikafloor and Topciment ranges.

Check pack contents as well. An item labelled “component A” is not automatically a complete two-component kit. The MC-DUR 1322 listing in this category specifies component A. The required hardener, mixing ratio and any fillers must match the exact material. Products from different brands should be combined only where compatibility is confirmed; sharing a brand name does not establish system compatibility either.

Texture, cleaning and return to service

A coarser texture may be required for the intended traffic conditions, but it generally changes how the floor needs to be cleaned. Consider actual wetting and contamination, footwear or wheels, and the maintenance equipment used. Do not rely on the word “slip-resistant” without a specified system. Colour and a matt or gloss finish should be considered alongside these practical requirements.

Plan separately for recoating, pedestrian access, vehicle traffic and full chemical exposure. A touch-dry surface is not a fully cured floor. Temperature, humidity and the specific system affect the times involved. With underfloor heating, follow the appropriate screed commissioning protocol, application temperatures and gradual return to heating. Do not assume that every coating is compatible.

During maintenance, remove sand and other abrasive dirt and clean up spills promptly. Use floor-cleaning products compatible with the particular finish, at the specified dilution. Monitor wear in the sealer and the condition of joints. An additional wax or coating can change the surface texture and must be permitted for the system.

Floor coating price per m²: what should you compare?

The pack price is only one part of the cost of a finished floor. For a meaningful price-per-m² comparison, include preparation and repairs, primer, the main material, required thickness, broadcast aggregates, sealing and detail work. Include installation when comparing complete project costs. A lower price per kilogram does not necessarily produce a lower cost for the finished area.

Calculate the quantity of each material from the area and specified consumption for its layer, then account for the available pack sizes. Porosity, surface roughness and local repairs can affect consumption. For two-component materials, establish whether the listed price covers a complete kit or an individual component. A thin coating on sound concrete is not directly comparable with a multilayer system over a substrate that needs repair.

Where consumption is specified in kg/m², multiply the price in EUR/kg by that consumption to calculate the material cost of the layer. For kg/m²/mm, also account for thickness in millimetres. Litres cannot be substituted for kilograms without density data. For a quartz-filled mixture, establish whether consumption refers to the resin alone or the complete mixture. Compare quotations on the same basis for labour, delivery and VAT.

For a project-specific selection, send an enquiry with the area, photographs, substrate type and condition, room use, expected loading and desired return-to-service date. Include wetting, heating, sunlight exposure and chemical contact where relevant. These details help establish suitable products and the quantities needed for your project.

Frequently Asked Questions About Floor Coatings

Selection, preparation, compatibility and the cost of a finished floor.
Which floor coating should I choose for a garage?

Choose a system rated for vehicle traffic, taking into account concrete strength and moisture, wear, spills and the required texture. Epoxy and some polyurethane systems may be suitable, but the exact product must permit these loads. Include preparation, primer and the other specified layers.

Is an epoxy or polyurethane floor more suitable?

Selection depends on the intended use, substrate, movement, UV exposure and chemical and mechanical loads. Compare specific systems, rather than resin families alone. Check permitted uses, thickness, surface finish and application conditions for each option.

Can a floor coating be applied over old tiles?

It may be possible where the selected system permits this substrate and the tiles are firmly bonded. Check hollow areas, moisture, joints and contamination. Mechanical preparation, a suitable primer and a trial area may be required. Loose tiles and unstable layers cannot be resolved simply with a new finish.

Are microcement and resin coatings suitable for underfloor heating?

Suitable systems exist, but compatibility must be checked for the exact variant and complete floor build-up. Follow the requirements for the screed, heating commissioning, application temperatures and return to normal operation. Existing movement joints must be accounted for.

Can a self-levelling screed be left as the finished floor?

Only where the specific material is intended to be an exposed wearing surface under the relevant loads. Many self-levelling screeds provide a level substrate for a subsequent finish or coating. The term “self-levelling” does not establish wear resistance, waterproofing or suitability for vehicles.

Does a polyurethane coating replace terrace waterproofing?

Only if the specific system is intended to perform that function and is installed with all the required details. Check falls, drainage, joints and wall connections. UV resistance or flexibility alone does not establish a complete waterproofing solution.

When can I walk or park on the new coating?

The times for pedestrian access, vehicle loading and full cure are different. They depend on the exact system and site conditions. Follow the stated times for the application temperature; a touch-dry surface is not necessarily ready for parking or chemical exposure.

How is the floor coating price per m² calculated?

Add preparation, repairs and all system materials using their consumption rates and required pack sizes; include labour when pricing a complete installation. Check whether a two-component product is a complete kit. A project-specific calculation needs the area, substrate, loads and desired finish.