Flooring for Commercial and Residential Spaces

Sort by:
Sikafloor®-2510 W комплект A+B епоксидно подово покритие на водна основа

Sikafloor®-2510 W - Water-Based Epoxy Floor Coating for Concrete

Цена по запитване
Sikafloor®-2510 W е 2-компонентно цветно епоксидно подово покритие на водна основа за бетон и циментови замазки. Подходящо е за гаражи, работилници, складове и вътрешни мокри помещения, когато се търси лесен за почистване, устойчив и по-слабо миришещ финиш.
MC-DUR TopSpeed – комплект 10 кг

MC-DUR TopSpeed – бързо подово покритие, стандартни цветове / 10 кг

Цена по запитване
MC-DUR TopSpeed е бързовтвърдяващо, устойчиво на влага при полагане двукомпонентно ролково покритие за минерални основи и индустриални подове.Области на приложение Подово покритие върху минерални основи и индустриални подове. Компонент на...
Topciment Sttandard Microdeck M, 18 kg

Topciment Sttandard Microdeck M, 18 kg

€93,59
Cement-based microcement from the two-component Sttandard system, intended as a decorative finish for interior floors. It is applied in thin coats with a trowel over a stable, prepared substrate. The grain size determines its texture and role within the system.
Sikafloor®-304 W - матово полиуретаново запечатващо покритие

Sikafloor®-304 W - Matte Polyurethane Sealing Coat

Цена по запитване
Sikafloor®-304 W е 2-компонентна матова полиуретанова запечатка на водна основа за Sika ComfortFloor системи. Нисък VOC, добър UV профил, лесно почистване и матов финиш.
Sikafloor®-432 DecoCem - саморазливен циментов под 3-30 мм

Sikafloor®-432 DecoCem – Self-Leveling Cementitious Floor 3–30 mm

Цена по запитване
Циментов саморазливен под 3-30 мм за складове, гаражи и индустриални зони. Разход около 1.9 kg/m2/mm, пешеходен трафик след 3-4 часа.
Sikafloor®-150 - епоксиден грунд за бетон и Sika подови системи

Sikafloor®-150 - Epoxy Primer for Concrete and Sika Flooring Systems

Цена по запитване
2К епоксиден грунд за бетон и циментови замазки при нормално до силно абсорбиращи основи. Подготовка за Sikafloor подови системи.
Sikafloor®-151 - епоксиден грунд за бетон с ниска до средна пориозност

Sikafloor®-151 - Epoxy Primer for Low to Medium Porosity Concrete

Цена по запитване
Нисковискозен 2К епоксиден грунд за бетон и циментови замазки с ниска до средна абсорбция. За Sikafloor епоксидни и PU системи.
Sikafloor®-169 - прозрачно епоксидно свързващо и запечатващо покритие

Sikafloor®-169 - Transparent Epoxy Binder and Sealing Coat

Цена по запитване
Sikafloor®-169 е прозрачно 2-компонентно епоксидно свързващо вещество и запечатка за Sikafloor Decodur системи, цветен кварцов пясък и подове с нормално до тежко натоварване.
Sikafloor®-359 N - UV устойчива полиуретанова запечатка за подове

Sikafloor®-359 N - UV-Resistant Polyurethane Floor Seal Coat

Цена по запитване
Sikafloor®-359 N е твърдо-еластична полиуретанова запечатка за индустриални подове, паркинги, рампи и системи с кварцова посипка. UV устойчива, матова и водоплътна.
Sikafloor®-102 Level - саморазливна замазка 2-15 мм

Sikafloor®-102 Level - self-leveling screed 2-15 mm

Цена по запитване
Sikafloor®-102 Level е полимер-модифицирана саморазливна циментова замазка за вътрешно изравняване на подове. Полага се в слой 2-15 мм преди плочки, PVC, килим или ламинат.
Sikafloor® Level-30 - саморазливна замазка за външно приложение 4-30 мм

Sikafloor® Level-30 - self-leveling screed for exterior use 4-30 mm

Цена по запитване
Саморазливна циментова замазка 4-30 мм за вътрешно и външно изравняване. За външни зони се използва само със съвместимо защитно покритие.
Sika® Level-01 Primer - акрилен грунд за саморазливна замазка

Sika® Level-01 Primer - Acrylic Primer for Self-Leveling Screeds

Цена по запитване
Sika® Level-01 Primer е акрилен грунд и запечатка на водна основа за минерални основи преди циментови саморазливни замазки и изравнителни разтвори. Намалява загубата на вода към основата и подобрява адхезията.
Sikafloor® ProSeal-12 - импрегнатор и запечатка за бетон

Sikafloor® ProSeal-12 – Concrete Impregnator and Sealer

Цена по запитване
Sikafloor® ProSeal-12 е акрилатен импрегнатор и запечатка за пресен или втвърден бетон. Подходящ е за гаражи, складове, работилници и бетонни подове, които прашат или попиват замърсявания, когато се търси икономична повърхностна защита без пълна епоксидна система.
Sika® Extender T - сгъстител за смоли Sikafloor

Sika® Extender T - Thickener for Sikafloor® Resins

Цена по запитване
Sika® Extender T е фин бял влакнест полимерен прах за сгъстяване на смоли Sikafloor®. Използва се за регулиране на вискозитета, текстурата и стичането при подови системи.
Sikadur®-504 - кварцов пясък 0.08-0.2 mm за подови системи

Sikadur®-504 Quartz Sand 0.08-0.2 mm for Flooring Systems

Цена по запитване
Sikadur®-504 е фин кварцов пясък 0.08-0.2 mm за индустриални подови системи. Използва се като системен пълнител или добавка в подходящи епоксидни и полиуретанови решения, когато е нужна контролирана фина фракция.
Sikafloor®-1590 (ab) – бързовтвърдяващ епоксиден грунд за бетон и циментови замазки

Sikafloor®-1590 - Fast-Curing Epoxy Primer for Concrete

Цена по запитване
Sikafloor®-1590 е 2-компонентен бързовтвърдяващ епоксиден грунд със слаб мирис за бетон, циментови и епоксидни замазки преди Sikafloor подови системи.
Опаковка Sikafloor®-54 Booster – ускорител за епоксидни смоли Sikafloor

Sikafloor®-54 Booster - Accelerator for Sikafloor Epoxy Resins

Цена по запитване
Sikafloor®-54 Booster е течен ускорител за съвместими епоксидни смоли Sikafloor®. Използва се професионално за съкращаване на времената за втвърдяване и последващ слой.

MC-Dekorchips M1 – декоративен чипс / 5 кг

Цена по запитване
MC-Dekorchips M1 е декоративен чипс, смес M1, за оформяне на съвместими подови покрития.Области на приложениеДекоративно посипване на подходящи подови системи според актуалната документация на производителя.Основни характеристики Декоративна смес M1. Опаковка...
Topciment Efectto PU Big Grain, 10 kg

Topciment Efectto PU Big Grain, 10 kg

€140,93
Water-based polyurethane microcement for a base coat for floors and walls. Efectto PU is a two-component system for continuous decorative coatings in interior and exterior spaces.
MC-DUR TopSpeed M – комплект 10 кг

MC-DUR TopSpeed M – бърз матов прозрачен запечатващ слой / 10 кг

Цена по запитване
MC-DUR TopSpeed M е бързовтвърдяващ, устойчив на влага при полагане и матово-прозрачен запечатващ слой за подови системи.Области на приложение Повърхностно запечатване на епоксидни и полиуретанови подови системи. Приложение при неблагоприятни...
Topciment Efectto Quartz Medium Grain, 17 kg

Topciment Efectto Quartz Medium Grain, 17 kg

€225,66
Ready-to-use decorative microcement for a finishing coat for interior floors with light traffic. The product is an acrylic paste applied with a trowel as part of the Efectto Quartz system.
Topciment Sttandard Microbase XXL, 24 kg

Topciment Sttandard Microbase XXL, 24 kg

€87,87
Cement-based microcement from the two-component Sttandard system, intended as a base coat for preparing floors and walls. It is applied in thin coats with a trowel over a stable, prepared substrate. The grain size determines its texture and role within the system.
Topciment Sttandard Microbase XL, 22 kg

Topciment Sttandard Microbase XL, 22 kg

€80,51
Cement-based microcement from the two-component Sttandard system, intended as a base coat for preparing floors and walls. It is applied in thin coats with a trowel over a stable, prepared substrate. The grain size determines its texture and role within the system.
Topciment Efectto PU Medium Grain, 10 kg

Topciment Efectto PU Medium Grain, 10 kg

€132,50
Water-based polyurethane microcement for a finishing coat for floors. Efectto PU is a two-component system for continuous decorative coatings in interior and exterior spaces.
Topciment Efectto Quartz Big Grain, 6 kg

Topciment Efectto Quartz Big Grain, 6 kg

€84,82
Ready-to-use decorative microcement for a base coat for interior floors and walls. The product is an acrylic paste applied with a trowel as part of the Efectto Quartz system.
Topciment Efectto Quartz Medium Grain, 6 kg

Topciment Efectto Quartz Medium Grain, 6 kg

€89,78
Ready-to-use decorative microcement for a finishing coat for interior floors with light traffic. The product is an acrylic paste applied with a trowel as part of the Efectto Quartz system.
Topciment Evoluttion Microbase L, 20 kg

Topciment Evoluttion Microbase L, 20 kg

€106,56
One-component powder microcement for a base coat before finishing microcements. The Evoluttion system is mixed with water to form a thin decorative coating with a continuous appearance.
Topciment Industtrial LISO – компонент A, 4,5 kg

Topciment Industtrial LISO – component A, 4.5 kg

€41,13
Component A of a two-component water-based epoxy microcement for a finishing coat for walls. The Industtrial system is designed for thin decorative interior coatings with high hardness and wear resistance.
Topciment Builtex 160 – армираща мрежа, 1 × 50 m

Topciment Builtex 160 – reinforcing mesh, 1 × 50 m

€154,05
Fibreglass reinforcing mesh for base coats in microcement systems. Builtex is embedded in the preparation layer to help distribute stresses from the substrate. The roll is 1 m wide and 50 m long.
Topciment Efectto Quartz Super Grain, 6 kg

Topciment Efectto Quartz Super Grain, 6 kg

€84,82
Ready-to-use decorative microcement for a base coat for interior floors. The product is an acrylic paste applied with a trowel as part of the Efectto Quartz system.
Topciment Evoluttion Microbase XL, 20 kg

Topciment Evoluttion Microbase XL, 20 kg

€106,56
One-component powder microcement for a base coat before finishing microcements. The Evoluttion system is mixed with water to form a thin decorative coating with a continuous appearance.
Topciment Builtex 58 – армираща мрежа, 1 × 50 m

Topciment Builtex 58 – reinforcing mesh, 1 × 50 m

€154,05
Fibreglass reinforcing mesh for base coats in microcement systems. Builtex is embedded in the preparation layer to help distribute stresses from the substrate. The roll is 1 m wide and 50 m long.
Topciment Primacem Joint, 1.5 kg

Topciment Primacem Joint, 1.5 kg

€27,10
Acrylic filling putty for tile joints before a subsequent coating. Suitable for manual application indoors and outdoors, including preparation in kitchens and bathrooms.
Topciment Primacem ABS, 5 L

Topciment Primacem ABS, 5 L

€53,97
Water-based acrylic primer for absorbent surfaces before applying Topciment microcement. Improves adhesion to suitable substrates such as gypsum plaster and plasterboard.
Topciment Efectto Quartz Super Grain, 17 kg

Topciment Efectto Quartz Super Grain, 17 kg

€210,66
Ready-to-use decorative microcement for a base coat for interior floors. The product is an acrylic paste applied with a trowel as part of the Efectto Quartz system.
Topciment Industtrial BASE – компонент A, 18 kg

Topciment Industtrial BASE – component A, 18 kg

€164,39
Component A of a two-component water-based epoxy microcement for a base coat for walls. The Industtrial system is designed for thin decorative interior coatings with high hardness and wear resistance.
Topciment Builtex 50 – армираща мрежа, 1 × 50 m

Topciment Builtex 50 – reinforcing mesh, 1 × 50 m

€154,05
Fibreglass reinforcing mesh for base coats in microcement systems. Builtex is embedded in the preparation layer to help distribute stresses from the substrate. The roll is 1 m wide and 50 m long.
Topciment Sttandard Microbase L, 20 kg

Topciment Sttandard Microbase L, 20 kg

€73,28
Cement-based microcement from the two-component Sttandard system, intended as a base coat for preparing floors and walls. It is applied in thin coats with a trowel over a stable, prepared substrate. The grain size determines its texture and role within the system.
Topciment Natture L, 20 kg

Topciment Natture L, 20 kg

€124,63
Base lime-based microcement for thin decorative coatings on floors and walls. The two-component Natture system is trowel-applied to create mineral textures and hand-finished effects.
Topciment Evoluttion Microbase XXL, 20 kg

Topciment Evoluttion Microbase XXL, 20 kg

€106,56
One-component powder microcement for a base coat before finishing microcements. The Evoluttion system is mixed with water to form a thin decorative coating with a continuous appearance.
Topciment Industtrial LISO – компонент A, 18 kg

Topciment Industtrial LISO – component A, 18 kg

€164,39
Component A of a two-component water-based epoxy microcement for a finishing coat for walls. The Industtrial system is designed for thin decorative interior coatings with high hardness and wear resistance.
Topciment Industtrial XL – компонент A, 4,5 kg

Topciment Industtrial XL – component A, 4.5 kg

€41,13
Component A of a two-component water-based epoxy microcement for a base coat for floors. The Industtrial system is designed for thin decorative interior coatings with high hardness and wear resistance.
Topciment Arcocem Basic синьо с дозатор, 0,5 L

Topciment Arcocem Basic Azul (blue) with dispenser, 0.5 L

€141,21
Pigment paste in aqueous dispersion for colouring compatible systems and decorative coatings. Arcocem Basic is supplied in base colours for dosing according to colour formulas. This SKU identifies a specific colour and package size.
Topciment Arcocem Basic жълто с дозатор, 0,5 L

Topciment Arcocem Basic Amarillo (yellow) with dispenser, 0.5 L

€57,83
Pigment paste in aqueous dispersion for colouring compatible systems and decorative coatings. Arcocem Basic is supplied in base colours for dosing according to colour formulas. This SKU identifies a specific colour and package size.
Topciment Primapox 100 Barrier – компонент A, 12,4 kg

Topciment Primapox 100 Barrier – component A, 12.4 kg

€378,83
Component of the two-component Primapox 100 Barrier epoxy system, solvent-free with 100% solids. Used as a primer and vapour barrier to control capillary moisture on suitable mineral substrates.
Topciment Arcocem Basic черно, 1 L

Topciment Arcocem Basic Negro, 1 L

€71,91
Pigment paste in aqueous dispersion for colouring compatible systems and decorative coatings. Arcocem Basic is supplied in base colours for dosing according to colour formulas. This SKU identifies a specific colour and package size.
Topciment Primapox 100 Barrier – компонент B, 7,6 kg

Topciment Primapox 100 Barrier – component B, 7.6 kg

€237,72
Component of the two-component Primapox 100 Barrier epoxy system, solvent-free with 100% solids. Used as a primer and vapour barrier to control capillary moisture on suitable mineral substrates.
Topciment Industtrial MEDIO – компонент A, 18 kg

Topciment Industtrial MEDIO – component A, 18 kg

€164,39
Component A of a two-component water-based epoxy microcement for a finishing coat for floors. The Industtrial system is designed for thin decorative interior coatings with high hardness and wear resistance.
Topciment Primacem Fix, 5 L

Topciment Primacem Fix, 5 L

€44,99
Ready-to-use water-based tack primer for improving adhesion between existing substrates and new coatings. Used as a bonding coat between old and new concrete and mortars.
Topciment Evoluttion Microdeck L, 18 kg

Topciment Evoluttion Microdeck L, 18 kg

€124,88
One-component powder microcement for a finish for interior floors. The Evoluttion system is mixed with water to form a thin decorative coating with a continuous appearance.

For homes, shops and offices, select flooring by appearance, pedestrian traffic and maintenance. Options include resin systems, microcement, primers and protective sealers. A bedroom finish and a busy shop floor may require different systems.

Selecting suitable materials

State the substrate, movement of furniture and trolleys, cleaning routine and any underfloor heating. Use a sample to select colour and sheen. Respect the light-traffic limitation of Efectto Quartz Medium; Industtrial must not be installed over underfloor heating.

Products from available brands

The products below have different roles. Check the description, package contents and technical sheet for the exact material:

Quantity and technical enquiry

Send the area, photographs, substrate and service conditions. Quantities depend on consumption of each coat and package sizes. An individual product price does not automatically cover a finished system. Send a technical enquiry.

Questions: flooring for commercial and residential spaces

Application, compatibility and project preparation.
What should I establish before selection?

For homes, shops and offices, select flooring by appearance, pedestrian traffic and maintenance. Options include resin systems, microcement, primers and protective sealers. A bedroom finish and a busy shop floor may require different systems.

What are the key differences between products?

State the substrate, movement of furniture and trolleys, cleaning routine and any underfloor heating. Use a sample to select colour and sheen. Respect the light-traffic limitation of Efectto Quartz Medium; Industtrial must not be installed over underfloor heating.

Is one product enough?

It depends on the task. Primers, body materials, reinforcement and protective finishes have different roles. Follow the selected system description; a package may contain only one component.

How is the substrate assessed?

Check material, soundness, moisture, existing layers, cracks and contamination. Establish the required preparation before calculating materials.

Can different brands be combined?

Only with established compatibility for the specific layer sequence. Generic names such as primer or sealer do not make products interchangeable.

What determines the quantity?

Area, substrate condition, consumption of each coat and coat count. Check whether a separate resin, hardener, primer or protective finish is required.

When can the treated surface be used?

Follow the exact product instructions and actual conditions. Touch-dry, ready for recoating and ready for full loading can occur at different times.

How can I get a specific recommendation?

Send photographs, dimensions, substrate details, the area of use and expected loads. Include existing problems and the desired schedule.