Microcement for Ceilings

Sort by:
Load Previous
Topciment Sttandard Microfino S, 15 kg

Topciment Sttandard Microfino S, 15 kg

€78,40
Cement-based microcement from the two-component Sttandard system, intended as a fine decorative finish for interior walls. It is applied in thin coats with a trowel over a stable, prepared substrate. The grain size determines its texture and role within the system.
Quick view
Add to cart
Topciment Industtrial LISO – компонент A, 4,5 kg

Topciment Industtrial LISO – component A, 4.5 kg

€41,13
Component A of a two-component water-based epoxy microcement for a finishing coat for walls. The Industtrial system is designed for thin decorative interior coatings with high hardness and wear resistance.
Quick view
Add to cart
Topciment Elitte Glaze мед 063, 0,5 L

Topciment Elitte Glaze cobre 063 (copper), 0.5 L

€43,74
Ready-to-use Elitte Glaze decorative coating with metallic reflections, based on pigments in aqueous dispersion. Used to create decorative effects on microcement and other properly prepared surfaces.
Quick view
Add to cart
Topciment Builtex 160 – армираща мрежа, 1 × 50 m

Topciment Builtex 160 – reinforcing mesh, 1 × 50 m

€154,05
Fibreglass reinforcing mesh for base coats in microcement systems. Builtex is embedded in the preparation layer to help distribute stresses from the substrate. The roll is 1 m wide and 50 m long.
Quick view
Add to cart
Topciment Pure Mettal бронз – компонент A, 5 kg

Topciment Pure Mettal bronze – component A, 5 kg

€619,65
Metallic powder, component A for the two-component Pure Mettal decorative metallic coating. The system creates a metal-like texture and reflections on properly prepared interior and exterior surfaces.
Quick view
Add to cart
Topciment Elitte Glaze злато 063, 0,5 L

Topciment Elitte Glaze gold 063, 0.5 L

€56,58
Ready-to-use Elitte Glaze decorative coating with metallic reflections, based on pigments in aqueous dispersion. Used to create decorative effects on microcement and other properly prepared surfaces.
Quick view
Add to cart
Topciment Builtex 58 – армираща мрежа, 1 × 50 m

Topciment Builtex 58 – reinforcing mesh, 1 × 50 m

€154,05
Fibreglass reinforcing mesh for base coats in microcement systems. Builtex is embedded in the preparation layer to help distribute stresses from the substrate. The roll is 1 m wide and 50 m long.
Quick view
Add to cart
Topciment Elitte Glitter сребро 500, 0,5 L

Topciment Elitte Glitter silver 500, 0.5 L

€56,58
Ready-to-use Elitte Glitter decorative coating with metallic reflections, based on pigments in aqueous dispersion. Used to create decorative effects on microcement and other properly prepared surfaces.
Quick view
Add to cart
Topciment Primacem ABS, 5 L

Topciment Primacem ABS, 5 L

€53,97
Water-based acrylic primer for absorbent surfaces before applying Topciment microcement. Improves adhesion to suitable substrates such as gypsum plaster and plasterboard.
Quick view
Add to cart
Topciment Industtrial BASE – компонент A, 18 kg

Topciment Industtrial BASE – component A, 18 kg

€164,39
Component A of a two-component water-based epoxy microcement for a base coat for walls. The Industtrial system is designed for thin decorative interior coatings with high hardness and wear resistance.
Quick view
Add to cart
Topciment Classic Mettal месинг, 1 kg

Topciment Classic Mettal latón natural (brass), 1 kg

€61,70
Ready-to-use water-based decorative paint with fine metal particles. Classic Mettal creates a metallic effect on prepared surfaces such as microcement, concrete, brick, ceramics and plaster. The application tool is selected according to the desired effect.
Quick view
Add to cart
Topciment Builtex 50 – армираща мрежа, 1 × 50 m

Topciment Builtex 50 – reinforcing mesh, 1 × 50 m

€154,05
Fibreglass reinforcing mesh for base coats in microcement systems. Builtex is embedded in the preparation layer to help distribute stresses from the substrate. The roll is 1 m wide and 50 m long.
Quick view
Add to cart
You've viewed 24 of 126 products
Load More

Microcement for ceilings can be considered as a decorative finish when a connection between the mineral appearance of walls and ceiling is desired. Before choosing materials, establish the substrate, adhesion and the system’s suitability for overhead application.

Concrete or suspended ceiling

For concrete, check adhesion, contamination and levelling requirements. For suspended construction, stability, board joints and movement are decisive. The decorative layer does not correct deformation or leaks.

Lighting and decorative texture

Side lighting highlights tool marks and unevenness. A sample under the selected lighting helps establish colour, texture and finish. Plan the working areas with the installer.

Preparation before installation

Specify the area, height, construction type, existing coatings and working access. Layers and quantities are determined after selecting a suitable system for this surface.

Related categories

All microcement products · Microcement for walls · Microcement for living rooms

Send a technical enquiry with the area, photographs and a description of the substrate.

Systems, primers and sealers

Browse the products from Topciment and Sika. Check the role of each material: substrate preparation, base coat, decorative finish, pigment or protective sealer. Product pages provide the available technical sheets. Select all layers for the same documented system, substrate and intended use.

Choosing a microcement system

Start with the substrate, room and desired texture. State the area, whether it is a floor or wall, and whether there is direct water exposure or underfloor heating. This information helps select suitable base coats, pigments and sealers from the chosen brand’s system.

Send a technical enquiry

Frequently asked questions: microcement for ceilings

Practical answers about substrates, systems and the specific application.
Is every microcement suitable for a ceiling?

No. Check the permitted application of the particular material and system for the relevant substrate and overhead work.

Can a concrete ceiling be treated?

With a suitable system and preparation of the concrete. Remove weak areas, formwork oil residues and poorly bonded coatings before the decorative layers.

What matters with a plasterboard ceiling?

Construction stability and correct joint detailing. Moving boards or unsuitable treatment can affect the finish.

Will the coating hide a leak or crack?

Address the cause of the leak or crack before decoration. Covering an active defect is not a lasting repair.

How should texture be selected with concealed lighting?

Use a sample under the actual or similar lighting. Light grazing the surface makes texture and small irregularities more visible.

Are the layers the same for a ceiling and a floor?

Do not assume the same system. Check the substrate, application, tools and required protective finish for each surface.

What does a ceiling quotation include?

Preparation, materials, decorative and protective layers, and access to the working area. Specify the area and height in advance.

Can it be matched to walls in the same colour?

A coordinated decorative appearance can be specified. Assess samples on both surfaces, since lighting and viewing angle affect perception.