Microcement for Bathrooms

Sort by:
Topciment Presealer, 5 L

Topciment Presealer, 5 L

€156,66
Water-based acrylic primer for Sttandard, Natture and Evoluttion systems. Presealer consolidates the microcement layer and promotes adhesion to the subsequent protective varnish.
Topciment Topsealer PRO+ FAST – компонент B, 0,64 kg

Topciment Topsealer PRO+ FAST – component B, 0.64 kg

€61,70
Component of a two-component protective microcement varnish with 100% solids. Topsealer PRO+ Fast is the fast-curing version. The system has a high-gloss finish.
Topciment Topsealer PRO+ гланц SLOW – компонент A, 0,8 kg

Topciment Topsealer PRO+ gloss SLOW – component A, 0.8 kg

€77,02
Component of a two-component protective microcement varnish with 100% solids. Topsealer PRO+ Slow is the slower-curing version. The system has a high-gloss finish.
Topciment Primacem Plus, 5 L

Topciment Primacem Plus, 5 L

€77,02
Water-based acrylic primer for non-absorbent surfaces before applying Topciment microcement. Used as a bonding coat on suitable tiles and other dense substrates.
Topciment Acricem, 25 L

Topciment Acricem, 25 L

€219,60
Water-based acrylic resin for Topciment two-component cement-based microcements. Acricem acts as component B and can also consolidate suitable concrete substrates or be added to mortars as specified in the technical sheet.
Topciment Topsealer WT One Coat сатен – компонент A, 5 L

Topciment Topsealer WT One Coat satin – component A, 5 L

€191,31
Component of a two-component water-based polyurethane varnish for protecting interior microcement finishes.
Topciment Primacem GRIP, 5 kg

Topciment Primacem GRIP, 5 kg

€56,58
Ready-to-use water-based bonding primer with mineral aggregate. Creates a rough surface to improve adhesion on smooth or low-absorption substrates before microcement and other compatible coatings.
Topciment Topsealer All in One сатен, 2 L

Topciment Topsealer All in One satin, 2 L

€79,64
Ready-to-use one-component water-based polyurethane varnish for protecting ready-to-use microcement systems. Topsealer WT All in One is applied without a separate hardener.
Topciment Topsealer DSV сатен – компонент A, 4 L

Topciment Topsealer DSV Satinado – component A, 4 L

€190,33
Component of a two-component solvent-based polyurethane varnish for protecting interior and exterior microcement. The system enhances the substrate colour and is available in different finishes.
Topciment Topsealer WT Dragon мат – компонент A, 3 L

Topciment Topsealer WT Dragon matt – component A, 3 L

€161,76
Two-component water-based polyurethane varnish for protective sealing of interior and exterior microcement.
Topciment Topsealer All in One мат, 5 L

Topciment Topsealer All in One matt, 5 L

€232,44
Ready-to-use one-component water-based polyurethane varnish for protecting ready-to-use microcement systems. Topsealer WT All in One is applied without a separate hardener.
Topciment Acricem, 5 L

Topciment Acricem, 5 L

€53,97
Water-based acrylic resin for Topciment two-component cement-based microcements. Acricem acts as component B and can also consolidate suitable concrete substrates or be added to mortars as specified in the technical sheet.

Microcement for bathrooms offers a continuous mineral appearance for appropriately selected walls and floors. Selection starts with wetting zones: a decorative wall, the floor near a basin and a shower area must be assessed separately.

Shower, floor and dry areas

For direct wetting, select a complete system with suitable waterproofing and protective finish. Falls, drains, internal corners and pipe penetrations are part of the solution. The name microcement alone does not establish suitability for continuous wetting.

Renovation over existing tiles

Check tile adhesion, voids, moisture, cracks and joint condition. Sound tiling can be considered as a substrate only with a system that permits it. Repair loose or moving areas first.

Sealer and daily maintenance

The selected sealer must suit the wetting conditions and cleaning method. Use cleaning products and tools permitted for it. Ventilation and drainage remain important for normal bathroom use.

Cost of bathroom microcement per m²

In addition to area, allow for preparation, waterproofing, niches, corners, drains, decorative layers and protection. Send photographs, dimensions and details of surfaces exposed to direct wetting for a quotation.

Related categories

All microcement products · Bathroom waterproofing · Microcement for floors

Systems, primers and sealers

Browse the products from Topciment and Sika. Check the role of each material: substrate preparation, base coat, decorative finish, pigment or protective sealer. Product pages provide the available technical sheets. Select all layers for the same documented system, substrate and intended use.

Send a technical enquiry with the area, photographs and a description of the substrate.

Choosing a microcement system

Start with the substrate, room and desired texture. State the area, whether it is a floor or wall, and whether there is direct water exposure or underfloor heating. This information helps select suitable base coats, pigments and sealers from the chosen brand’s system.

Send a technical enquiry

Frequently asked questions: microcement for bathrooms

Practical answers about substrates, systems and the specific application.
Does microcement replace waterproofing?

It must not be treated as a replacement based on its name alone. Choose a bathroom system that addresses waterproofing, decorative finish and details separately.

Can it be used on a shower floor?

With a system specifically suitable for this application, correct drainage and compatible layers. Check the limitations of the decorative material and sealer for direct wetting.

Can it be applied over existing bathroom tiles?

If they are firmly bonded and the selected system permits the substrate. Moisture, voids, damaged joints and unevenness must be assessed and treated first.

Are all sealers suitable for bathrooms?

No. Selection depends on wetting, system compatibility and maintenance. A decorative gloss or matt appearance does not establish suitability for a shower.

Is every microcement suitable for a shower area?

No. Select a specific system for the water exposure, substrate and protective finish. Coordinate substrate preparation, waterproofing, drain connections and sealing. Suitability for a bathroom does not automatically mean suitability for permanent immersion.

What affects the cost per m²?

Preparation, area, wet zones, waterproofing, layers and details. Specify the scope of materials and installation in the quotation.

How is the bathroom coating cleaned?

Use products permitted for the particular sealer. Follow instructions for cleaning agents, deposit removal and renewal of the protective layer.

What information is needed to choose a system?

Photographs, wall and floor areas, substrate type, existing tiles, waterproofing condition and areas exposed to direct wetting.