{"title":"Sika Products","description":"\u003cp\u003eBrowse Sika products in the Stroitelna Himia catalogue. This collection brings together the brand’s materials for waterproofing, flooring, concrete repair and protection, joints, grouting and bonding. Start with the task and the exact product data sheet.\u003c\/p\u003e\u003ch2\u003eSika product groups\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eWaterproofing:\u003c\/strong\u003e Sikalastic, SikaTop and Igolflex products with different applications for roofs, wet areas and foundations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFlooring and decorative systems:\u003c\/strong\u003e Sikafloor and SikaDecor microcement, including the necessary system components.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eConcrete repair and protection:\u003c\/strong\u003e Sika MonoTop, bonding and protective compounds, and Sikagard coatings according to the specific intended use.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eJoints and grouting:\u003c\/strong\u003e Sika Waterbar, SikaSwell, Sikadur-Combiflex, SikaGrout and other materials with different system roles.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTile bonding:\u003c\/strong\u003e SikaCeram cementitious adhesives selected by tile, substrate and conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eHow to choose a product\u003c\/h2\u003e\u003cp\u003eSpecify the substrate, area or volume, water and mechanical exposure, temperatures and desired finish. Check whether you need a primer, base coat, fine treatment, sealer or accessory. A shared brand does not establish compatibility of every combination.\u003c\/p\u003e\u003ch2\u003eChoose by application\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/hidroizolacia-produkti-sika\"\u003eSika waterproofing products\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/podovi-pokritia\"\u003eFloor coatings\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/mikrotsiment-sikadecor\"\u003eMicrocement for bathrooms, floors and walls\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003eConcrete repair mortars\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/zamonolitvashti-raztvori\"\u003eGrouting mortars and compounds\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/tsimentovi-lepila-za-plochki\"\u003eCementitious tile adhesives\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eApplication categories may include other brands. This collection brings together Sika products. Check the exact model against \u003ca href=\"https:\/\/bgr.sika.com\/\"\u003eofficial Sika Bulgaria information\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor a quotation, use the enquiry on the product page or \u003ca href=\"\/en\/pages\/contact\"\u003esend a technical enquiry\u003c\/a\u003e with model, pack, quantity and site information.\u003c\/p\u003e","products":[{"product_id":"sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane","title":"Sika AnchorFix®-2+ - Chemical Anchor for Medium and Heavy Loads","description":"\u003ch2\u003eSika AnchorFix-2+ for Medium and Heavy Loads\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-2+\u003c\/strong\u003e is a 2-component anchoring adhesive based on epoxy-acrylate, solvent-free and styrene-free. It is intended for normal and moderate climatic conditions and is used for anchoring reinforcing steel, threaded rods, bolts and special fastening systems.\u003c\/p\u003e\n\u003cp\u003eAnchorFix-2+ is the right choice when you need a chemical anchor for \u003cstrong\u003emedium and heavy loads\u003c\/strong\u003e, cracked or uncracked concrete, solid masonry, steel, hard natural stone or solid rock. According to the technical data sheet, the product has ETA for anchoring in concrete and for post-installed rebar, as well as seismic testing C1.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-2+\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAnchoring threaded rods, bolts, reinforcing bars and special fastening systems.\u003c\/li\u003e\n  \u003cli\u003eMedium and heavy-duty fixings in cracked and uncracked concrete.\u003c\/li\u003e\n  \u003cli\u003eInstallations where it is important that the adhesive does not sag when working overhead.\u003c\/li\u003e\n  \u003cli\u003eProjects with design requirements for ETA, post-installed rebar or seismic testing C1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Reference Data\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component epoxy-acrylate anchoring adhesive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 10 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 70 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +30 °C during application\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom -5 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 5 minutes \/ 50 minutes at +20 °C to +25 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e300 ml, 550 ml and 850 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAdvantages for Professional Installation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh load-bearing capacity and fast curing.\u003c\/li\u003e\n  \u003cli\u003eSuitable for cracked concrete.\u003c\/li\u003e\n  \u003cli\u003eApproved for contact with drinking water according to the WRAS approval stated in the TDS.\u003c\/li\u003e\n  \u003cli\u003eStyrene-free, low odour and low wastage.\u003c\/li\u003e\n  \u003cli\u003eNo transport restrictions according to the technical data sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Application Conditions\u003c\/h2\u003e\n\u003cp\u003eThe substrate must have verified load-bearing capacity, and the anchor hole must be clean, dry and free from oil, grease and loose or crumbling particles. Concrete and mortar must be more than 28 days old, unless the design and technical dimensioning specify otherwise.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-3030\u003c\/h2\u003e\n\u003cp\u003eIf the project is structurally critical, the concrete is damp or an epoxy system with a long open time is required, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e. For faster standard installations with lower requirements, see \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-2+ suitable for cracked concrete?\u003c\/h3\u003e\n\u003cp\u003eYes. The technical data sheet states that the product is suitable for cracked concrete, with final dimensioning to be carried out according to the project design and anchoring tables.\u003c\/p\u003e\n\u003ch3\u003eCan it be used at low temperature?\u003c\/h3\u003e\n\u003cp\u003eYes, the substrate temperature can be from -5 °C to +30 °C, but the cartridge must be at least +5 °C and the curing time changes depending on the temperature.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference compared with AnchorFix-1?\u003c\/h3\u003e\n\u003cp\u003eAnchorFix-1 is a faster standard polyester-based solution. AnchorFix-2+ is an epoxy-acrylate system for medium and heavy loads, cracked\/uncracked concrete and higher design requirements.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-anchorfix2\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Solutions for AnchorFix®-2+\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e AnchorFix-2+ is a strong, versatile choice for medium and heavy loads. If the project requires a long open time, very heavy structural fixing or specific work in damp concrete, compare it with the epoxy AnchorFix-3030.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the category, see \u003ca href=\"\/en\/collections\/materiali-za-ankerirane\"\u003eanchoring materials\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor heavy-duty epoxy fixings, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix®-3030\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor faster, lighter fixings, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix®-1\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"300 ml - 12pcs","offer_id":48728746524996,"sku":"592691","price":165.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/anchorfix2_-Ankerirashtolepilozasrednoitezhkonatovarvane.webp?v=1719418473"},{"product_id":"sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo","title":"Sika AnchorFix®-1 - Fast-Curing Chemical Anchor","description":"\u003ch2\u003eSika AnchorFix-1 for Fast Chemical Anchoring\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-1\u003c\/strong\u003e is a 2-component, styrene-free and solvent-free polyester anchoring adhesive. It is used as a fast-curing chemical anchor for reinforcing bars, threaded rods, bolts and other fixing systems in concrete, solid and hollow masonry, hard natural stone and solid rock.\u003c\/p\u003e\n\u003cp\u003eIt is a practical choice where fast installation with a short open time is required. For different types of stone and masonry, the technical data sheet requires a trial area, because substrates can vary in strength, composition and porosity.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-1\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFast anchoring of threaded rods, bolts and fixing elements.\u003c\/li\u003e\n  \u003cli\u003eInstallation in concrete, solid masonry, hollow masonry and hard natural stone.\u003c\/li\u003e\n  \u003cli\u003eApplications where it is important that the adhesive does not sag during overhead installation.\u003c\/li\u003e\n  \u003cli\u003eProjects where a standard cartridge and application with a standard dispensing gun are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Guidance\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component polyester anchoring adhesive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 10 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 60 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C during application\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom -10 °C to +40 °C; application at -10 °C is not stated in the ETA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 5 minutes \/ 50 minutes at +20 °C to +25 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e150 ml, 300 ml and 550 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eImportant Conditions for Reliable Anchoring\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe hole must be clean, dry and free from oils, grease, dust and loose particles.\u003c\/li\u003e\n  \u003cli\u003eThreaded rods and reinforcing bars must be cleaned of oils, dust and other contamination.\u003c\/li\u003e\n  \u003cli\u003eThe ambient temperature must be at least 3 °C above the dew point to avoid condensation.\u003c\/li\u003e\n  \u003cli\u003eFor hollow masonry, use \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix perforated sleeves\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eComparison with AnchorFix-2+ and AnchorFix-3030\u003c\/h2\u003e\n\u003cp\u003eIf the project requires medium\/heavy loads, cracked concrete, ETA for concrete and higher load-bearing capacity, see \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e. For epoxy anchoring in dry or damp concrete, long open time and heavy-duty structural fixings, see \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-1 suitable for hollow bricks?\u003c\/h3\u003e\n\u003cp\u003eYes, but a suitable perforated sleeve must be used and the instructions for cleaning, filling and inserting the anchor must be followed.\u003c\/p\u003e\n\u003ch3\u003eHow quickly does it cure?\u003c\/h3\u003e\n\u003cp\u003eAt +20 °C to +25 °C, the technical data sheet gives an open time of approx. 5 minutes and a curing time of approx. 50 minutes. At lower temperatures, the process slows down.\u003c\/p\u003e\n\u003ch3\u003eCan it be used overhead?\u003c\/h3\u003e\n\u003cp\u003eYes. According to the technical data sheet, the product does not sag even during overhead installation when applied correctly.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"300 ml - 12pcs","offer_id":48790269690180,"sku":"497848","price":132.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaAnchorFix_-1-Barzovtvardyavashtoankerirashtolepilo.webp?v=1718631829"},{"product_id":"sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo","title":"Sika AnchorFix®-3030 - epoxy chemical anchor for heavy loads","description":"\u003ch2\u003eSika AnchorFix-3030 for heavy-duty epoxy anchoring\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-3030\u003c\/strong\u003e is a 2-component, thixotropic, high-performance anchoring adhesive based on epoxy resin. It is used for anchoring threaded rods and reinforcing bars in cracked and non-cracked, dry or damp concrete.\u003c\/p\u003e\n\u003cp\u003eThis is the most suitable AnchorFix choice for heavy-duty and structurally critical fixings where an epoxy chemical base, high load-bearing capacity, long open time, C1\/C2 seismic testing and reliable performance in refurbishment or new construction are required.\u003c\/p\u003e\n\u003ch2\u003eWhen to choose AnchorFix-3030\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAnchoring reinforcing steel in refurbishment and new construction.\u003c\/li\u003e\n  \u003cli\u003eThreaded rods, bolts and special fastening systems under heavy loads.\u003c\/li\u003e\n  \u003cli\u003eFixing handrails, balustrades, railings, supports, rails, window and door frames.\u003c\/li\u003e\n  \u003cli\u003eCracked and non-cracked concrete, including dry or damp concrete.\u003c\/li\u003e\n  \u003cli\u003eProjects requiring a longer open time than fast-curing AnchorFix systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical guide values\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component epoxy resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 3 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 95 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +10 °C to +40 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 18 minutes \/ 8 hours at +20 °C to +25 °C; up to 300 minutes \/ 24 hours at +5 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e300 ml, 385 ml and 585 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAdvantages for structural applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLong open time for more controlled work on complex details.\u003c\/li\u003e\n  \u003cli\u003eCan be used in damp concrete.\u003c\/li\u003e\n  \u003cli\u003eETA for anchoring in cracked concrete and ETA for post-installed rebar.\u003c\/li\u003e\n  \u003cli\u003eTested for seismic loading C1 and C2.\u003c\/li\u003e\n  \u003cli\u003eCures without shrinkage and has high adhesion to the substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant before installation\u003c\/h2\u003e\n\u003cp\u003eThe anchor hole must always be clean, dry, free from oils, grease and loose particles, except where the specific application permits damp concrete according to the technical data sheet and the design. Threaded rods and reinforcing bars must be cleaned of dust, oil, corrosion and other contaminants.\u003c\/p\u003e\n\u003cp\u003eFor hollow masonry, use \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix perforated sleeves\u003c\/a\u003e. If you need a faster solution for more standard anchoring, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e or \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-3030 suitable for damp concrete?\u003c\/h3\u003e\n\u003cp\u003eYes. The technical data sheet specifies use for threaded rods and reinforcing bars in cracked and non-cracked, dry or damp concrete.\u003c\/p\u003e\n\u003ch3\u003eWhy is open time important?\u003c\/h3\u003e\n\u003cp\u003eFor more complex or structural anchors, the long open time provides greater control during injection, positioning and installation of the anchor, especially at lower temperatures.\u003c\/p\u003e\n\u003ch3\u003eCan it be used with a standard gun?\u003c\/h3\u003e\n\u003cp\u003eThe technical data sheet states that the 300 ml cartridge can be applied with a standard applicator gun. For other cartridge sizes, check the required gun and mixing nozzle.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-anchorfix3030\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for AnchorFix®-3030\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e AnchorFix-3030 is the right choice for heavy-duty and structurally critical fixings where an epoxy chemical base, long open time and work in dry or damp concrete are required. For faster or lighter-duty tasks, another AnchorFix product may be sufficient.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the full selection of anchoring products, see \u003ca href=\"\/en\/collections\/materiali-za-ankerirane\"\u003eanchoring materials\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor medium and heavy loads with epoxy acrylate, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix®-2+\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor hollow masonry and bricks, see \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix® perforated sleeves\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"585 ml - 12pcs","offer_id":48790530621764,"sku":"724684","price":541.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/anchorfix2_-Ankerirashtolepilozasrednoitezhkonatovarvane.webp?v=1719418473"},{"product_id":"perforirani-vtulki-za-sika-anchorfix","title":"Sika AnchorFix® Perforated Sleeves – for hollow masonry","description":"\u003ch2\u003eSika AnchorFix Perforated Sleeves for hollow masonry and hollow bricks\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix Perforated Sleeves\u003c\/strong\u003e are plastic perforated sleeves for anchoring in hollow bricks and hollow masonry in combination with Sika AnchorFix chemical anchors. The sleeve helps the resin distribute around the anchor and pass through the perforations, instead of being lost uncontrollably into the voids.\u003c\/p\u003e\n\u003cp\u003eUse them when working with hollow masonry, hollow bricks, or substrates where standard direct resin injection does not provide proper encapsulation of the anchor. This is an accessory for the AnchorFix system, not a stand-alone anchor.\u003c\/p\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy and fast installation.\u003c\/li\u003e\n  \u003cli\u003eImproved anchoring in hollow masonry.\u003c\/li\u003e\n  \u003cli\u003eLower loss of anchoring material.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with Sika AnchorFix systems according to the relevant product approvals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSizes according to the technical data sheet\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eLength\u003c\/th\u003e\n      \u003cth\u003eDiameter\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e50 mm\u003c\/td\u003e\n      \u003ctd\u003e12 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e85 mm\u003c\/td\u003e\n      \u003ctd\u003e16 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e85 mm\u003c\/td\u003e\n      \u003ctd\u003e20 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e130 mm\u003c\/td\u003e\n      \u003ctd\u003e16 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDrill the hole and clean it of dust and contaminants.\u003c\/li\u003e\n  \u003cli\u003eInsert the perforated sleeve into the hole.\u003c\/li\u003e\n  \u003cli\u003eFill the sleeve with a suitable Sika AnchorFix adhesive, starting from the bottom.\u003c\/li\u003e\n  \u003cli\u003eClose the cap when required to prevent resin leakage.\u003c\/li\u003e\n  \u003cli\u003eInsert the anchor with a twisting motion within the open time of the adhesive.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCompatible products\u003c\/h2\u003e\n\u003cp\u003eThe sleeves are used with chemical anchors from the Sika AnchorFix system. For fast standard installations, see \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e. For medium and heavy loads, see \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e. For epoxy anchoring in heavy-duty and structural applications, see \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs a sleeve required for hollow bricks?\u003c\/h3\u003e\n\u003cp\u003eYes. For hollow bricks and hollow masonry, the sleeve is the correct system accessory. It retains and distributes the resin around the anchor.\u003c\/p\u003e\n\u003ch3\u003eCan it be used with any chemical anchor?\u003c\/h3\u003e\n\u003cp\u003eUse the sleeves with Sika AnchorFix anchoring compounds and always check the relevant product technical data sheet\/approval.\u003c\/p\u003e\n\u003ch3\u003eWhat colour are the sleeves?\u003c\/h3\u003e\n\u003cp\u003eAccording to the technical data sheet, the sleeves are white plastic sleeves.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"12\/50 - 100 pcs.","offer_id":48824003199300,"sku":"152380","price":44.28,"currency_code":"EUR","in_stock":true},{"title":"16\/130 - 100 pcs.","offer_id":48824003232068,"sku":"531101","price":55.08,"currency_code":"EUR","in_stock":true},{"title":"16\/85 - 100 pcs.","offer_id":48824003264836,"sku":"531100","price":49.68,"currency_code":"EUR","in_stock":true},{"title":"20\/85 - 100 pcs.","offer_id":48824003297604,"sku":"152381","price":55.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/PerforiranivtulkizaSikaAnchorFix.webp?v=1719919763"},{"product_id":"sikagard-680-s-ednokomponentno-zashtitno-pokritie-za-beton","title":"Sikagard®-680 S Betoncolor - Protective Coating for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-680 S Betoncolor\u003c\/strong\u003e is a 1-component \u003cstrong\u003eprotective coating for concrete\u003c\/strong\u003e based on solvent-borne methacrylate resin. It is used on concrete and other cementitious mineral substrates where protection against weathering, carbonation and contamination is required, without significantly changing the characteristic texture of the concrete.\u003c\/p\u003e\n\n\u003cp\u003eThe product is available as a clear version and in RAL colours. It is suitable for facade and civil engineering concrete surfaces where a protective and decorative finish is required, with resistance to ageing, weathering and alkalinity.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikagard®-680 S Betoncolor?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor protecting concrete facades and elements\u003c\/strong\u003e - where the concrete is exposed to weathering and contamination.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor reducing carbonation\u003c\/strong\u003e - where the system must limit the penetration of carbon dioxide into the concrete.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor mineral cementitious substrates\u003c\/strong\u003e - concrete, repair mortars and other stable cementitious surfaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor a protective and decorative finish\u003c\/strong\u003e - where a clear or RAL colour version is required according to the project.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProperty\u003c\/th\u003e\n      \u003cth\u003ePractical benefit\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeather resistance\u003c\/td\u003e\n      \u003ctd\u003eSuitable for external concrete and cementitious surfaces exposed to rain and contamination.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHigh diffusion resistance to CO₂\u003c\/td\u003e\n      \u003ctd\u003eHelps reduce the rate and depth of concrete carbonation.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaintains water vapour permeability\u003c\/td\u003e\n      \u003ctd\u003eThe protection should not block the normal vapour permeability of a suitably prepared substrate.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduced dirt retention\u003c\/td\u003e\n      \u003ctd\u003eThe surface becomes dirty less easily and discolours less from rain and weathering.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eClear or RAL colour?\u003c\/h2\u003e\n\u003cp\u003eThe clear version is suitable when the aim is to preserve the visible structure of the concrete. The RAL colour versions are more suitable when, in addition to protection, a uniform decorative finish is required. The variants available in the store include 20 kg clear and 30 kg in RAL1015, RAL7032, RAL7030, RAL7035, RAL9001, RAL9002 and a clear version.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe substrate must be sound, dry, clean and free from dust, oils, friable material or weak old coatings.\u003c\/li\u003e\n  \u003cli\u003eFor repair mortars and new concrete, check the minimum age and moisture content according to the technical data sheet.\u003c\/li\u003e\n  \u003cli\u003eDo not choose the product by colour alone; check whether the main objective is protection against carbonation, weathering or a decorative finish.\u003c\/li\u003e\n  \u003cli\u003eFor heavily trafficked floors, permanent water exposure or chemical exposure, another Sika system should be checked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated categories\u003c\/h2\u003e\n\u003cp\u003eFor system selection, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003erepair mortars for concrete\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eSika waterproofing\u003c\/a\u003e. If you send photos, the area, substrate type and whether a clear or RAL finish is required, a more accurate system and primer\/preparation method can be selected.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard680s\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikagard®-680 S Betoncolor\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-680 S Betoncolor is a protective and decorative coating for concrete. The final result depends on the cleanliness and soundness of the substrate, the required primer, the choice between a clear and RAL finish, and whether the objective is protection against carbonation, weathering or visual refreshment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the category, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a water-based primer, compare with \u003ca href=\"\/en\/products\/sikagard-552-w-aquaprimer-grund-na-vodna-osnova\"\u003eSikagard®-552 W Aquaprimer\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a coating with high crack-bridging ability, see \u003ca href=\"\/en\/products\/sikagard-5500-zashtitno-pokritie-za-beton-s-visoka-sposobnost-za-premostvane-na-puknatini\"\u003eSikagard®-5500\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"20kg. \/ Colorless","offer_id":49288895398212,"sku":"5769","price":228.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-680_S_ednokomponentno_zashtitno_pokritie_za_beton.webp?v=1720433959"},{"product_id":"sikafloor-2640-епоксидно-текстурирано-бързовтвърдяващо-подово-покритие-и-запечатка","title":"Sikafloor®-2640 - Fast-Curing Epoxy Floor Coating","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-2640\u003c\/strong\u003e is a 2-component, fast-curing epoxy textured floor coating and seal coat. It is used for interior floors subject to medium to heavy loading, including garages, service workshops, warehouses, workshops, loading ramps, underground car parks and wet-process areas.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose Sikafloor 2640?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-2640 when you need a \u003cstrong\u003efast-curing epoxy floor coating\u003c\/strong\u003e with a lightly textured glossy finish and low maintenance requirements. The product is suitable for systems where faster return to service is important compared with standard epoxy solutions.\u003c\/p\u003e\n\n\u003ch2\u003eKey Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-curing 2-component epoxy coating and seal coat.\u003c\/li\u003e\n  \u003cli\u003eSeamless, hygienic and easy-to-maintain finish.\u003c\/li\u003e\n  \u003cli\u003eLow odour, low emissions and low colour change according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eGood mechanical resistance and easy application by roller or squeegee.\u003c\/li\u003e\n  \u003cli\u003eCan be installed as a slip-resistant surface with suitable broadcast aggregate.\u003c\/li\u003e\n  \u003cli\u003eCE marked to EN 1504-2 and EN 13813 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component epoxy textured coating and seal coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e30 kg set A+B\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoating thickness\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.6-0.8 mm, depending on the system\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing\u003c\/td\u003e\n      \u003ctd\u003eComponent A : Component B = 89 : 11 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003e+5 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n      \u003ctd\u003eUp to 4% by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoot traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 6 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull cure\u003c\/td\u003e\n      \u003ctd\u003eApprox. 14 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSikafloor 2640 or Sikafloor 264 Plus?\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-2640 is a faster-curing, lightly textured solution for interior floors subject to medium to heavy loading. \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e remains a strong option for a classic epoxy system for garages, warehouses and service workshops. The choice depends on the required return-to-service time, desired finish, need for broadcast aggregate and the condition of the concrete.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the floor area, photos of the substrate, information on whether moisture, old paint, oils, cracks or joints are present, and the finish you require - smooth, textured or slip-resistant. This makes it possible to assess whether Sikafloor®-2640 is the right fast epoxy coating for the project.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"Default Title","offer_id":49180352545092,"sku":null,"price":293.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-2640-Epoksidnoteksturiranobarzovtvardyavashtopodovopokritieizapechatka.webp?v=1725284843"},{"product_id":"sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi","title":"Sikagard®-700 S - Water-Repellent Impregnation for Concrete and Facades","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-700 S\u003c\/strong\u003e is a colourless silane\/siloxane water-repellent impregnation for absorbent cementitious substrates, concrete, cement renders, concrete slabs, masonry and natural stone. The product penetrates into open pores, reduces capillary water absorption and allows water vapour diffusion without acting as a vapour barrier.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikagard 700 S?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-700 S when you need a water-repellent impregnation for concrete or mineral facade substrates that must retain their natural appearance. It is suitable for surfaces exposed to weathering and can also be used as a hydrophobic impregnation beneath compatible protective coatings.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces capillary water absorption.\u003c\/li\u003e\n  \u003cli\u003eLimits efflorescence and the penetration of dirt into the pores.\u003c\/li\u003e\n  \u003cli\u003eReduces the ingress and diffusion of chloride ions.\u003c\/li\u003e\n  \u003cli\u003eUsually does not change the appearance of the substrate.\u003c\/li\u003e\n  \u003cli\u003eAllows water vapour diffusion and does not act as a vapour barrier.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated with suitable solvent-based or emulsion-based coatings.\u003c\/li\u003e\n  \u003cli\u003eMeets the requirements for a hydrophobic impregnation according to BDS EN 1504-2, Class I according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eSilane\/siloxane blend in organic solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eColourless liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~0.800 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003e1-2 coats of Sikagard®-700 S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~0.300-0.500 kg\/m² per coat on normally absorbent substrates\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;5-6% when measured with Tramex\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time before compatible coatings\u003c\/td\u003e\n\u003ctd\u003eAt least 5 hours after the hydrophobic impregnation\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 3 hours after application at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eSikagard®-700 S is not a waterproofing solution for hydrostatic pressure, permanent contact with water or waterproofing of underground structures. Visible cracks allowing moisture ingress must be treated separately. On natural stone and where high aesthetic requirements apply, prepare a trial area, as slight darkening may occur on some substrates.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the substrate type, approximate area, whether there are cracks or efflorescence, and whether a subsequent coating will be applied over the impregnation. This helps assess the required consumption and whether Sikagard®-700 S is the right choice compared with a water-based impregnation such as Sikagard®-703 W.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5l.","offer_id":49284386652484,"sku":"151824","price":97.42,"currency_code":"EUR","in_stock":true},{"title":"20l.","offer_id":49284386685252,"sku":"151821","price":270.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-700S-Vodootblaskvashtimpregnatorzatsimentovipovarhnosti_fasadi.webp?v=1726741140"},{"product_id":"sikagard-703-w-vodootblaskvasht-impregnator-za-fasadi-1","title":"Sikagard®-703 W - Water-Repellent Facade Impregnator","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-703 W\u003c\/strong\u003e is a ready-to-use, water-based water-repellent impregnation for facades and porous mineral substrates. It is used on mortar, brick, stone, asbestos cement and other absorbent facade materials where protection against water penetration is required without a visible change in appearance.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikagard 703 W?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-703 W for facades, masonry and stone surfaces where water-repellent protection with water vapour permeability is required. It is a practical choice for facade maintenance because reduced water absorption limits soiling and the conditions for the development of fungi, mould and lichens.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eStrong water-repellent performance for facade substrates.\u003c\/li\u003e\n  \u003cli\u003eWater vapour permeable - allows the substrate to \"breathe\".\u003c\/li\u003e\n  \u003cli\u003eInvisible treatment that does not change the appearance of the substrate.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance to soiling by reducing water absorption.\u003c\/li\u003e\n  \u003cli\u003eLimits the conditions for the development of fungi, mould and lichens.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated with suitable paints and coatings.\u003c\/li\u003e\n  \u003cli\u003eReady-to-use, water-based product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eCombination of silane\/siloxane\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhitish liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.0 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on mortar\u003c\/td\u003e\n\u003ctd\u003e~150-200 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on other porous materials\u003c\/td\u003e\n\u003ctd\u003e~300-500 g\/m² depending on porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time before compatible coatings\u003c\/td\u003e\n\u003ctd\u003eAt least 5 hours after applying the hydrophobic impregnation\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 3 hours after application at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, sound and free from dust, grease stains, efflorescence and old coatings. Cracks wider than 300 μm must be repaired before application. For all substrates, it is good practice to carry out a trial area, especially where the final appearance is critical.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the facade material, area, approximate porosity and whether there are cracks or old coatings. This helps estimate the actual consumption and whether Sikagard®-703 W is more suitable than a deeper-penetrating solvent-based impregnation such as Sikagard®-700 S.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"2l.","offer_id":49284402741572,"sku":"406943","price":19.55,"currency_code":"EUR","in_stock":true},{"title":"20l.","offer_id":49284402774340,"sku":"437349","price":112.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-703W-Vodootblaskvashtimpregnatorzafasadi.webp?v=1726741937"},{"product_id":"sikagard-905-w-impregnator-i-povarhnosten-vtvarditel-za-obrabotka-sreshtu-izsolvane-i-izbivane-na-vlaga","title":"Sikagard®-905 W - Impregnator and Surface Hardener Against Efflorescence","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-905 W\u003c\/strong\u003e is a ready-to-use, water-based impregnator and surface hardener for treatment against efflorescence, damp patches and dusting on weak mineral substrates. Once dry, it is transparent and creates a physical barrier that reduces moisture and the conditions for mold growth.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikagard 905 W be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-905 W for plaster, skim coats, brick or stone where there are traces of efflorescence, local dampness or surface dusting. The product penetrates deeply due to its low viscosity and can prepare weak, dusting substrates before painting.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVery low viscosity for deep penetration into the substrate.\u003c\/li\u003e\n  \u003cli\u003eAlmost invisible after drying.\u003c\/li\u003e\n  \u003cli\u003eSuitable for treatment against efflorescence and damp patches.\u003c\/li\u003e\n  \u003cli\u003eCan be used as a surface hardener for weak and dusty substrates.\u003c\/li\u003e\n  \u003cli\u003eCan be covered with paints or wallpaper after full drying.\u003c\/li\u003e\n  \u003cli\u003eSuitable for interior and exterior use.\u003c\/li\u003e\n  \u003cli\u003eUV resistant and without biocidal\/algicidal raw materials according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eWater-based impregnating and damp-proofing resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eMilky white liquid, transparent after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.01 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003eTypically ~0.2-0.3 l\/m² per coat, depending on porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eBy brush or roller, rubbing in until the substrate is saturated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecond coat\u003c\/td\u003e\n\u003ctd\u003eOn highly absorbent substrates, after the first coat has dried\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVOC content\u003c\/td\u003e\n\u003ctd\u003e~0.0 g\/l according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eSikagard®-905 W does not solve moisture caused by condensation on cold walls and is not a substitute for full restoration where plaster is severely damaged. Visible traces of efflorescence, mold and biological growth must be removed before application. If the material is to remain without a subsequent coating, make a test area, as under some conditions it may slightly change the appearance of the substrate.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDescribe whether the problem is efflorescence, dusting, moisture from the substrate or condensation, and what coating will be applied afterwards. This is important because Sikagard®-905 W is the correct choice for surface impregnation and strengthening, but it does not replace structural waterproofing.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"2l.","offer_id":49284405985604,"sku":"95594","price":17.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-905W_-Impregnatoripovarhnostenvtvarditelzaobrabotkasreshtuizsolvaneiizbivanenavlaga.webp?v=1726742540"},{"product_id":"sikagard-907-w-impregnator-za-poryozni-nastilki-i-stabilizator-na-pyasachni-fugi","title":"Sikagard®-907 W - Impregnator for Porous Paving and Sand Joints","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-907 W\u003c\/strong\u003e is a 1-component, UV-resistant, water-based impregnator for protecting porous paving and stabilizing sand joints. The product protects surfaces against water, oils and other aggressive liquids, and in joints it penetrates the sand, stabilizes it and reduces erosion.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikagard 907 W be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-907 W for paved surfaces, terraces, car parks, ramps, yards, pedestrian areas, commercial areas and porous concrete or stone paving. It is suitable when both surface impregnation and stabilization of sand joints are required.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component product, ready to use, without dilution.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant and weather-resistant.\u003c\/li\u003e\n  \u003cli\u003eProtects against water, oils and fuels.\u003c\/li\u003e\n  \u003cli\u003eReduces staining from hydrocarbon-based materials.\u003c\/li\u003e\n  \u003cli\u003eResistant to de-icing salts.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance to freeze\/thaw cycles.\u003c\/li\u003e\n  \u003cli\u003eStabilizes sand joints, reduces erosion and limits weed growth.\u003c\/li\u003e\n  \u003cli\u003eMakes cleaning easier and may intensify the colour of the substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylic dispersion-based resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eMilky white liquid, colourless\/transparent after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.01 kg\/L at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e~9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on paved surfaces with sand joints\u003c\/td\u003e\n\u003ctd\u003e~0.5–1.5 L\/m² for the first coat; ~0.100–0.200 L\/m² for the second coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on other surfaces without joints\u003c\/td\u003e\n\u003ctd\u003e~0.200–0.300 L\/m² for the first coat; ~0.100–0.150 L\/m² for the second coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 6 hours at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePedestrian traffic\u003c\/td\u003e\n\u003ctd\u003eApproximately after ~4–5 hours at around +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLight traffic \/ full loading\u003c\/td\u003e\n\u003ctd\u003e~24 hours \/ ~72 hours at around +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be thoroughly cleaned and dry. For sand joints, check that the sand is sufficiently dry and compacted, without excessive compaction that would reduce penetration. The product is not suitable where there is high chemical exposure.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the type of paving, the area, the width and depth of the joints, whether there will be vehicle traffic and what type of contamination is expected. This makes it possible to assess consumption and whether one or two coats are required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard907w\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikagard®-907 W\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-907 W is a practical choice when you need an impregnator for pavers, porous paving and sand joints. For concrete floors, façades or heavily loaded industrial areas, another sealer or protective system may be required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor concrete impregnators and sealers, see \u003ca href=\"\/en\/collections\/%D0%B8%D0%BC%D0%BF%D1%80%D0%B5%D0%B3%D0%BD%D0%B8%D1%80%D0%B0%D0%BD%D0%B5-%D0%B8-%D0%B7%D0%B0%D0%BF%D0%B5%D1%87%D0%B0%D1%82%D0%B2%D0%B0%D0%BD%D0%B5-%D0%BD%D0%B0-%D0%B1%D0%B5%D1%82%D0%BE%D0%BD\"\u003econcrete impregnation and sealing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor water-repellent façade protection, compare with \u003ca href=\"\/en\/products\/sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi\"\u003eSikagard®-700 S\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor an acrylic sealer for concrete floors, see \u003ca href=\"\/en\/products\/sikafloor-proseal-12-akrilaten-sastav-za-impregnirane-i-zapechatka-na-betonni-povarhnosti\"\u003eSikafloor® ProSeal-12\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"5l.","offer_id":49284433150276,"sku":"158935","price":51.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-907W_-Impregnatorzaporyozninastilkiistabilizatornapyasachnifugi.webp?v=1726742860"},{"product_id":"sikagard-720-epocem-epoksi-tsimentov-raztvor-za-zapechatka-na-pori","title":"Sikagard®-720 EpoCem® - Epoxy-Cement Pore Sealing Mortar","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-720 EpoCem®\u003c\/strong\u003e is a 3-component epoxy-cement fine mortar for pore sealing, levelling and finishing concrete, mortar and stone surfaces. It is used as a 0.5-3 mm layer, including on damp or recently placed concrete substrates, where preparation is required before subsequent resin coatings.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose Sikagard 720 EpoCem?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-720 EpoCem® for concrete surfaces with pores, unevenness or high moisture, where a smooth, strong and technically controlled substrate must be created. The product is suitable for new construction and repair of concrete with a damaged surface, including in chemically aggressive environments.\u003c\/p\u003e\n\n\u003ch2\u003eMain Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLevelling layer on concrete or mortar at a thickness of 0.5-3 mm.\u003c\/li\u003e\n  \u003cli\u003ePore sealing, smoothing and levelling of concrete surfaces.\u003c\/li\u003e\n  \u003cli\u003ePreparation for smooth finishing coatings.\u003c\/li\u003e\n  \u003cli\u003eTemporary moisture barrier with a minimum thickness of 2 mm under epoxy, polyurethane or PMMA resin coatings requiring a dry substrate.\u003c\/li\u003e\n  \u003cli\u003eApplication on substrates with high moisture and on recently placed concrete, without standing water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter chemical resistance compared with polymer-cement mortars and screeds.\u003c\/li\u003e\n  \u003cli\u003eExcellent protection of concrete in aggressive environments.\u003c\/li\u003e\n  \u003cli\u003eImpermeable to liquids, yet vapour-permeable.\u003c\/li\u003e\n  \u003cli\u003eExcellent adhesion to damp or dry, recently placed or hardened concrete.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated quickly with Sika® resin-based finishing products.\u003c\/li\u003e\n  \u003cli\u003eFor interior and exterior use.\u003c\/li\u003e\n  \u003cli\u003eSolvent-free and can be applied manually or mechanically.\u003c\/li\u003e\n  \u003cli\u003eCE marking according to EN 1504 Parts 2 and 3 as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eEpoxy-modified cementitious mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003ePre-batched 21 kg set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003eComponent A : B : C = 1 : 2.5 : 14-15 by mass\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity of mix A+B+C\u003c\/td\u003e\n\u003ctd\u003e~2.00 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompressive strength\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;45 N\/mm² after 28 days at +20 °C and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -30 °C to +80 °C under continuous exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~2.0 kg\/m²\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLayer thickness\u003c\/td\u003e\n\u003ctd\u003e0.5-3 mm; up to 5 mm on small areas\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +8 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~80 min at +10 °C, ~40 min at +20 °C, ~20 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant Application Conditions\u003c\/h2\u003e\n\u003cp\u003eThe concrete substrate must be sound, with a minimum compressive strength of 25 N\/mm² and a minimum tensile strength of 1.5 N\/mm². The substrate may be damp, but must be free from puddles and contaminants such as oils, grease, old coatings or impregnations. When applying gas-tight coatings over Sikagard®-720 EpoCem®, check the substrate moisture and do not work on assumptions.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, the condition of the concrete, the measured moisture, the desired layer thickness and the coating that will be applied afterwards. This is important because Sikagard®-720 EpoCem® is often an intermediate technical layer and must be coordinated with the complete system.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard720\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Systems for Sikagard®-720 EpoCem®\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-720 EpoCem is a technical intermediate layer for pore sealing, levelling and preparation of concrete, including damp substrates without standing water. The next coating must be selected according to the moisture level, exposure and finish requirements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor protective coatings and systems, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor epoxy flooring systems after suitable preparation, see \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a primer in Sikafloor systems, compare with \u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":49284447961412,"sku":"92315","price":98.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-720EpoCem_-Epoksi-tsimentovraztvorzazapechatkanapori.webp?v=1726743223"},{"product_id":"sikacor-950-f-pokritie-za-stomana-i-beton-za-tezhak-rezhim-na-eksploatatsia","title":"SikaCor®-950 F - Epoxy Coating for Steel and Concrete Under Heavy-Duty Conditions","description":"\u003cp\u003e\u003cstrong\u003eSikaCor®-950 F\u003c\/strong\u003e is a durable 2-component, low-solvent epoxy coating for steel and concrete under heavy-duty service conditions. It is used for underground and underwater structures, hydraulic engineering works, tanks and water-retaining structures, including environments with wastewater, agriculture and the chemical industry.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose SikaCor 950 F?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaCor®-950 F when a protective coating for concrete or steel is required with high resistance to water, abrasion, impact and chemicals. It is a professional product for sites with aggressive service environments, including locations where application onto damp concrete is unavoidable.\u003c\/p\u003e\n\n\u003ch2\u003eMain Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2-component epoxy coating for steel and concrete.\u003c\/li\u003e\n  \u003cli\u003eHard after full curing.\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant and impact-resistant.\u003c\/li\u003e\n  \u003cli\u003eExcellent resistance to water and chemicals.\u003c\/li\u003e\n  \u003cli\u003eSuitable for underground and underwater structures.\u003c\/li\u003e\n  \u003cli\u003eCE marking as a coating for concrete protection in accordance with EN 1504-2, as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003e2-component coating based on epoxy resin and mineral fillers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, tinted red\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.9 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolids content\u003c\/td\u003e\n\u003ctd\u003e~75% by volume, ~88% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem on concrete\u003c\/td\u003e\n\u003ctd\u003e2-3 coats of SikaCor®-950 F; the first coat may be diluted with max. 5% Sika® Thinner S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem on steel\u003c\/td\u003e\n\u003ctd\u003e2-3 coats of SikaCor®-950 F; for high mechanical loads, SikaCor® Zinc R primer is recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio A:B\u003c\/td\u003e\n\u003ctd\u003e93:7 by weight; 100:14 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTheoretical consumption\u003c\/td\u003e\n\u003ctd\u003e~0.380 kg\/m² for 150 μm dry film thickness, without losses\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMinimum product and substrate temperature\u003c\/td\u003e\n\u003ctd\u003e+10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~1.5 hours at +20 °C; ~45 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChemical and Temperature Resistance\u003c\/h2\u003e\n\u003cp\u003eAccording to the TDS, the product is resistant to fresh, process, saline and seawater, domestic wastewater, faeces, diluted inorganic acids and salts, mineral oils and fuels, lubricating oils and detergents. It is not resistant to benzene hydrocarbons and tar oils. Dry heat resistance is up to approx. +100 °C, and hot water resistance is up to approx. +60 °C.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Limitations\u003c\/h2\u003e\n\u003cp\u003eSikaCor®-950 F is not suitable for surfaces in contact with drinking water. Direct exposure to water immediately after application should only be permitted in special cases and after consultation with environmental protection authorities, as solvents may temporarily contaminate the water.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify whether the substrate is concrete or steel, the service environment, contact with water\/wastewater, expected chemical exposure, desired system thickness and application conditions. With SikaCor®-950 F, the choice of system is more important than the individual product.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"35kg. \/ Black","offer_id":49284570644804,"sku":"640145","price":524.0,"currency_code":"EUR","in_stock":true},{"title":"35kg. \/ Red","offer_id":49284584767812,"sku":"639972","price":524.0,"currency_code":"EUR","in_stock":true},{"title":"Thinner S 5 kg. \/ N\/A","offer_id":54182716834116,"sku":"753259","price":54.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaCor_-950F_-Pokritiezastomanaibetonzatezhakrezhimnaeksploatatsia.webp?v=1726744221"},{"product_id":"sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka","title":"Sikafloor®-150 - Epoxy Primer for Concrete and Sika Flooring Systems","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-150\u003c\/strong\u003e is a 2-component epoxy primer for concrete, cementitious screeds and epoxy screeds. It is used as a primer for all Sika epoxy and polyurethane flooring systems, as well as a bonding bridge for levelling screeds and floor screeds.\u003c\/p\u003e\n\n\u003ch2\u003eWhen is Sikafloor 150 used?\u003c\/h2\u003e\n\u003cp\u003eThe product is suitable for normally to highly absorbent concrete and cementitious surfaces. It is selected when the substrate needs to be primed before an epoxy or polyurethane flooring system, for example in garages, warehouses, workshops, industrial floors, stone carpet systems or other Sikafloor solutions.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLow viscosity and good penetration into the substrate.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to concrete and cementitious surfaces.\u003c\/li\u003e\n  \u003cli\u003eEasy application and short waiting times.\u003c\/li\u003e\n  \u003cli\u003eLow odour.\u003c\/li\u003e\n  \u003cli\u003eMultipurpose product - primer, levelling mortar, screed or bonding bridge, depending on the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSikafloor 150 or Sikafloor 151?\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-150 is generally selected for normally to highly absorbent substrates. If the concrete has low to medium absorbency, \u003ca href=\"\/en\/products\/sikafloor-151-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-151\u003c\/a\u003e is often the more suitable alternative. The safest choice is made after assessing the porosity, moisture and the system that will be applied over it.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, the condition of the concrete, whether the substrate is new or old, how absorbent it is and what coating will be applied after the primer. This helps confirm whether Sikafloor®-150 is the correct epoxy primer for the specific flooring system.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikafloor150\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Sikafloor systems for Sikafloor®-150\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikafloor-150 is a primer and system preparatory layer. It is not a standalone final floor finish; it is selected according to the porosity of the concrete, moisture, expected load and the subsequent epoxy or polyurethane coating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor garages and car parks, see \u003ca href=\"\/en\/collections\/pokritia-nastilki-avtomobilni-parkingi-i-garzhi\"\u003eepoxy flooring for garages and car parks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a water-based epoxy coating under moderate load, compare with \u003ca href=\"\/en\/products\/sikafloor-2510-w-epoksidno-podovo-pokritie-na-vodna-osnova\"\u003eSikafloor®-2510 W\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a more wear-resistant epoxy coating, see \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"10kg.","offer_id":49284638277956,"sku":"871193","price":204.12,"currency_code":"EUR","in_stock":true},{"title":"25kg.","offer_id":49284638310724,"sku":"871178","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-150-Epoksidengrund_izravnitelenraztvorizamazka.webp?v=1726745160"},{"product_id":"sikafloor-151-epoksiden-grund-izravnitelen-raztvor-i-zamazka","title":"Sikafloor®-151 - Epoxy Primer for Low to Medium Porosity Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-151\u003c\/strong\u003e is a 2-component, low-viscosity epoxy resin used as an \u003cstrong\u003eepoxy primer for concrete\u003c\/strong\u003e, cement screeds and epoxy mortars. It is best suited for low to medium absorbent substrates where good penetration, strong adhesion and reliable preparation are required before an epoxy or polyurethane flooring system.\u003c\/p\u003e\n\n\u003cp\u003eThe product is multifunctional: it can be used as a primer, as a binder for levelling mortars and screeds, and as part of Sikafloor systems for garages, automotive service workshops, warehouses, work areas, commercial spaces, microcement and decorative flooring solutions. Selection should be based on the porosity and strength of the substrate, moisture, expected traffic load and the subsequent layer.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikafloor®-151?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor low to medium absorbent concrete\u003c\/strong\u003e - when the substrate is not highly absorbent but requires epoxy priming before a system is applied.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBefore epoxy and polyurethane floor coatings\u003c\/strong\u003e - as a system primer for Sikafloor solutions on concrete and cement screeds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor levelling mortars and screeds\u003c\/strong\u003e - when an epoxy component with good penetration and adhesion is required.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor professional flooring systems\u003c\/strong\u003e - for garages, service workshops, warehouses, workshops and other interior concrete areas with defined loading requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSikafloor®-151 or Sikafloor®-150?\u003c\/h2\u003e\n\u003cp\u003eBoth products are epoxy primers, but they should not be selected on price alone. \u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e is a strong choice for normally to highly absorbent substrates and is already optimised as a primary primer for concrete. Sikafloor®-151 is the more precise choice when the substrate has low to medium absorbency and fast curing, low viscosity and good penetration are required.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCriterion\u003c\/th\u003e\n      \u003cth\u003eSikafloor®-151\u003c\/th\u003e\n      \u003cth\u003eWhat it means on site\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMain role\u003c\/td\u003e\n      \u003ctd\u003eEpoxy primer and binder\u003c\/td\u003e\n      \u003ctd\u003ePreparation before resin flooring systems or levelling mortars.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate\u003c\/td\u003e\n      \u003ctd\u003eConcrete, cement screeds and epoxy mortars\u003c\/td\u003e\n      \u003ctd\u003eSuitable for sound mineral substrates after proper mechanical preparation.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAbsorbency\u003c\/td\u003e\n      \u003ctd\u003eLow to medium\u003c\/td\u003e\n      \u003ctd\u003eFor highly absorbent substrates, check whether \u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e is more suitable.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNext layer\u003c\/td\u003e\n      \u003ctd\u003eSikafloor epoxy and polyurethane systems\u003c\/td\u003e\n      \u003ctd\u003eFor example \u003ca href=\"\/en\/products\/sikafloor-2510-w-epoksidno-podovo-pokritie-na-vodna-osnova\"\u003eSikafloor®-2510 W\u003c\/a\u003e, \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e or broadcast systems.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePractical guidance before application\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe substrate must be sound, clean, dry and free from dust, oils, cement laitance or weak old coatings.\u003c\/li\u003e\n  \u003cli\u003eCracks, voids and weak concrete must be treated before priming, because the primer does not compensate for structural defects.\u003c\/li\u003e\n  \u003cli\u003eCheck the moisture content, temperature, dew point and working time according to the Sika technical data sheet.\u003c\/li\u003e\n  \u003cli\u003eIf the system is for an \u003ca href=\"\/en\/collections\/podovi-pokritia-za-avtoservizi-i-rabotilnitsi\"\u003eautomotive service workshop\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/pokritia-nastilki-avtomobilni-parkingi-i-garzhi\"\u003egarage\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/podovi-pokritia-za-skladove-i-rabotni-pomeshtenia\"\u003ewarehouse\u003c\/a\u003e, the choice of finish and broadcast aggregate should be matched to the loading and cleaning requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackaging and ordering\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-151 is supplied as a ready-to-mix \u003cstrong\u003e30 kg\u003c\/strong\u003e set. When ordering, it is advisable to specify the floor area, substrate condition, desired subsequent layer and whether the system will be smooth, textured or quartz broadcast. This allows the primer to be selected as part of a working flooring system, rather than as a standalone product without context.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikafloor151\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Sikafloor systems for Sikafloor®-151\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikafloor-151 is more suitable for low to medium absorbent concrete substrates where good penetration and a stable bond to the subsequent Sikafloor system are required. On highly absorbent substrates, it is often compared with Sikafloor-150.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor comparison on more absorbent substrates, see \u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor service workshops and work areas, browse \u003ca href=\"\/en\/collections\/podovi-pokritia-za-avtoservizi-i-rabotilnitsi\"\u003efloor coatings for automotive service workshops\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a wear-resistant epoxy coating, see \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"30kg.","offer_id":49284643914052,"sku":"579488","price":345.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-151-Epoksidengrund_izravnitelenraztvorizamazka.webp?v=1726745545"},{"product_id":"sikafloor-169-epoksidno-svarzvashto-veshtestvo-za-raztvori-zamazki-i-zapechatvashti-pokritia","title":"Sikafloor®-169 - Transparent Epoxy Binder and Sealing Coat","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-169\u003c\/strong\u003e is a 2-component, low-viscosity, transparent epoxy binder and sealing coat. It is used in Sikafloor Decodur systems, with colored quartz sand, and for floors exposed to normal to heavy and very heavy mechanical loads.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor 169?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-169 when you need a \u003cstrong\u003etransparent epoxy resin for decorative or industrial flooring systems\u003c\/strong\u003e, rather than a colored finish coat. The product is used as a binder for mortars and screeds with colored quartz sand or as a transparent sealing layer in Sikafloor Decodur systems.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTransparent epoxy binder and sealer.\u003c\/li\u003e\n  \u003cli\u003eLow viscosity and multi-purpose application.\u003c\/li\u003e\n  \u003cli\u003eLow volatile organic compound (VOC) content.\u003c\/li\u003e\n  \u003cli\u003eLow degree of yellowing according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eGood mechanical and abrasion resistance.\u003c\/li\u003e\n  \u003cli\u003eCE marking to EN 13813 and EN 1504-2 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component transparent epoxy resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e10 kg A+B set\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing ratio\u003c\/td\u003e\n      \u003ctd\u003eComponent A : Component B = 75 : 25 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption as a sealer\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.15 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption as a wearing layer\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.7-2 kg\/m² depending on the system\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n      \u003ctd\u003eBelow 4% by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoot traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 12 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull cure\u003c\/td\u003e\n      \u003ctd\u003eApprox. 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhich systems is it suitable for?\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-169 is more specialized than a standard epoxy floor paint. It is used for Sikafloor Decodur systems with colored quartz sand, decorative seal coats and industrial floors with higher loading. If you are looking for a colored epoxy coating for a garage or workshop, a more suitable starting point may be \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e. If you need a matt PU sealer, see \u003ca href=\"\/en\/products\/sikafloor-304-w-poliuretanovo-matovo-zapechatvashto-pokritie-na-vodna-osnova\"\u003eSikafloor®-304 W\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify which system will be installed, whether colored quartz sand will be used, the area, the expected load and the condition of the substrate. This helps determine whether Sikafloor®-169 is the correct binder or whether another Sikafloor system is required.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"10kg.","offer_id":49284650369348,"sku":"174989","price":201.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-169-Epoksidnosvarzvashtoveshtestvozaraztvori_zamazkiizapechatvashtipokritia.jpg?v=1726745774"},{"product_id":"sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad","title":"Sikafloor®-264 Plus - epoxy floor coating for garages and warehouses","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-264 Plus\u003c\/strong\u003e is the current product in our catalogue for Sikafloor 264 epoxy floor systems. It is a two-component coloured epoxy coating for indoor concrete and cementitious floors where a seamless, wear-resistant and easy-to-maintain finish is required.\u003c\/p\u003e\n\n\u003ch2\u003eTypical use\u003c\/h2\u003e\n\u003cp\u003eUse it for indoor garages, workshops, warehouses, service areas, loading zones and covered parking areas when the substrate is sound, dry and mechanically prepared. The system can be smooth, self-levelling or anti-slip with quartz broadcast depending on traffic, water, tyres and cleaning requirements.\u003c\/p\u003e\n\n\u003ch2\u003eKey points\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e30 kg set: Component A 24 kg + Component B 6 kg.\u003c\/li\u003e\n  \u003cli\u003eInterior use only according to the current Sika product data sheet.\u003c\/li\u003e\n  \u003cli\u003eLow odour and low VOC emissions.\u003c\/li\u003e\n  \u003cli\u003eSmooth glossy finish or anti-slip broadcast system.\u003c\/li\u003e\n  \u003cli\u003eSuitable for concrete and cement screeds after proper preparation and priming.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sika","offers":[{"title":"30kg. \/ RAL7032","offer_id":49284667507012,"sku":"829966","price":380.0,"currency_code":"EUR","in_stock":true},{"title":"30kg. \/ RAL7035","offer_id":49284676321604,"sku":"821383","price":380.0,"currency_code":"EUR","in_stock":true},{"title":"30kg. \/ Pastel colors","offer_id":49284676354372,"sku":null,"price":390.0,"currency_code":"EUR","in_stock":true},{"title":"30kg. \/ Bright colors","offer_id":49284676387140,"sku":null,"price":417.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/de-P-Sikafloor-264-Plus-01-Comp-A-B-30kg-1x1-07899774_1-1.png?v=1779864883"},{"product_id":"sikafloor-2510-w-epoksidno-podovo-pokritie-na-vodna-osnova","title":"Sikafloor®-2510 W - Water-Based Epoxy Floor Coating for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-2510 W\u003c\/strong\u003e is a 2-component, coloured, water-based epoxy floor coating for concrete and cement screeds. It is suitable where a cleaner, easier-to-maintain and more durable floor is required in garages, workshops, warehouses, commercial areas, staircases and indoor areas with wet processes.\u003c\/p\u003e\n\n\u003cp\u003eThe product has low VOC emissions, low odour, good abrasion and mechanical resistance, and can be used as a primer, smooth or textured coating, self-levelling wearing layer or sealing coat. Before selecting a system, the condition of the concrete, moisture content, absorbency, expected loading and need for an anti-slip finish should be checked.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor®-2510 W?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor an epoxy coating on concrete\u003c\/strong\u003e - when the substrate is sound, prepared and a thin-layer coloured water-based coating is required.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor garages, service areas and workshops\u003c\/strong\u003e - for interior floors with normal working loads where easy cleaning and lower maintenance are important.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor warehouses and work areas\u003c\/strong\u003e - when untreated concrete produces dust or soils easily and a more practical finish is needed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor indoor wet-process areas\u003c\/strong\u003e - when the system must be matched to cleaning, grip and in-service moisture exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSystem selection and compatible products\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSituation\u003c\/th\u003e\n      \u003cth\u003eWhat to check\u003c\/th\u003e\n      \u003cth\u003eRelated products\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNormally absorbent concrete\u003c\/td\u003e\n      \u003ctd\u003eStrength, dust, absorbency and the need for preliminary priming.\u003c\/td\u003e\n      \u003ctd\u003e\n\u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e, \u003ca href=\"\/en\/products\/sikafloor-151-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-151\u003c\/a\u003e\n\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShorter application timescales\u003c\/td\u003e\n      \u003ctd\u003eTemperature, working time and permissible waiting time before the next layer.\u003c\/td\u003e\n      \u003ctd\u003e\n\u003ca href=\"\/en\/products\/sikafloor-1590-ab-epoksiden-grund-za-beton\"\u003eSikafloor®-1590\u003c\/a\u003e, \u003ca href=\"\/en\/products\/sikafloor-54-booster-uskoritel-za-epoksidni-smoli\"\u003eSikafloor®-54 Booster\u003c\/a\u003e\n\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNeed for texture or anti-slip performance\u003c\/td\u003e\n      \u003ctd\u003eSlip risk, cleaning method and expected loading.\u003c\/td\u003e\n      \u003ctd\u003e\n\u003ca href=\"\/en\/products\/sikadur-504-spetsialen-kvartsov-pyasak-za-industrialni-podovi-sistemi-0-08-0-2mm\"\u003eSikadur®-504\u003c\/a\u003e, \u003ca href=\"\/en\/products\/sika-extender-t-sgastitel-za-podovi-sistemi-sikafloor-na-osnovata-na-smoli\"\u003eSika® Extender T\u003c\/a\u003e\n\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHigher mechanical resistance\u003c\/td\u003e\n      \u003ctd\u003eWhether the area is a car park, ramp, warehouse or service zone with heavier loading.\u003c\/td\u003e\n      \u003ctd\u003e\n\u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e, \u003ca href=\"\/en\/products\/sikafloor-359-n-poliuretanovo-tvardo-elastichno-zapechatvashto-pokritie\"\u003eSikafloor®-359 N\u003c\/a\u003e\n\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eConsumption, packaging and colours\u003c\/h2\u003e\n\u003cp\u003eThe product data indicates an approximate total consumption of around \u003cstrong\u003e0.3-0.4 kg\/m²\u003c\/strong\u003e for primer and finishing layer. Actual consumption depends on the absorbency and evenness of the concrete, the application method, texture and selected system. Available variants include 5 kg and 20 kg packs, RAL7032, RAL7035, pastel colours, bright colours and a colourless version for a sealing coat.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations before ordering\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUse on a sound, clean and properly prepared concrete or cementitious substrate.\u003c\/li\u003e\n  \u003cli\u003eRemove dust, oils, weak old coatings and contamination before application.\u003c\/li\u003e\n  \u003cli\u003eFollow the Sika Product Data Sheet, especially regarding moisture, temperature, working time and the next layer.\u003c\/li\u003e\n  \u003cli\u003eFor external UV-exposed areas or heavy chemical loading, first check whether this system is the correct choice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp data-seo-internal-link=\"epoxy-garage-guide-2026-05-18\"\u003e\u003cstrong\u003eComparing systems for a garage?\u003c\/strong\u003e See the guide \u003ca href=\"\/en\/blogs\/statii\/epoksidna-nastilka-za-garazh\"\u003eepoxy flooring for garages with Sika products\u003c\/a\u003e to assess when Sikafloor®-2510 W is the right choice and when a system with Sikafloor®-264 Plus is more suitable.\u003c\/p\u003e\n\u003cp\u003eIf the floor is for an \u003ca href=\"\/en\/collections\/podovi-pokritia-za-avtoservizi-i-rabotilnitsi\"\u003eauto service area or workshop\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/pokritia-nastilki-avtomobilni-parkingi-i-garzhi\"\u003egarage and car park\u003c\/a\u003e, or \u003ca href=\"\/en\/collections\/podovi-pokritia-za-pomeshtenia-s-mokri-protsesi\"\u003ewet-process area\u003c\/a\u003e, send the floor area, photos and a description of the loading. This allows the correct system to be selected, rather than choosing by product name alone.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"RAL7032 \/ 5kg.","offer_id":49284683202884,"sku":"848770","price":112.8,"currency_code":"EUR","in_stock":true},{"title":"RAL7032 \/ 20kg.","offer_id":49284704403780,"sku":"839686","price":298.92,"currency_code":"EUR","in_stock":true},{"title":"Pastel colors \/ 5kg.","offer_id":49284683268420,"sku":null,"price":118.44,"currency_code":"EUR","in_stock":true},{"title":"Pastel colors \/ 20kg.","offer_id":49284704436548,"sku":null,"price":310.2,"currency_code":"EUR","in_stock":true},{"title":"Bright colors \/ 5kg.","offer_id":49284683301188,"sku":null,"price":129.72,"currency_code":"EUR","in_stock":true},{"title":"Bright colors \/ 20kg.","offer_id":49284704469316,"sku":null,"price":355.32,"currency_code":"EUR","in_stock":true},{"title":"Colorless - sealing layer for concrete and cement screeds \/ 5kg.","offer_id":49284704502084,"sku":"777363","price":109.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/glo-Sikafloor-2510-W-5kg-01424176_3A1-1.webp?v=1780058573"},{"product_id":"sikafloor-359-n-poliuretanovo-tvardo-elastichno-zapechatvashto-pokritie","title":"Sikafloor®-359 N - UV-Resistant Polyurethane Floor Seal Coat","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-359 N\u003c\/strong\u003e is a 2-component, tough-elastic polyurethane sealing coating for industrial floors and quartz-broadcast systems. It is suitable for car parks, ramps, warehouses and flooring systems where UV resistance, watertightness, a matt finish and good mechanical resistance are required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikafloor 359 N be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-359 N when an epoxy or polyurethane flooring system needs to be protected with a \u003cstrong\u003ecoloured polyurethane seal coat\u003c\/strong\u003e that does not yellow and can be used in broadcast systems. It is a more suitable choice for car parks, ramps and warehouse areas than a standard decorative finish when loads and wear are higher.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTough-elastic polyurethane material.\u003c\/li\u003e\n  \u003cli\u003eGood mechanical and chemical resistance.\u003c\/li\u003e\n  \u003cli\u003eWatertight coating with good opacity.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant and non-yellowing according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eMatt finish and option for an anti-slip surface.\u003c\/li\u003e\n  \u003cli\u003eCertified as part of OS 11a and OS 11b systems according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component coloured polyurethane seal coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e32.5 kg A+B set\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.7-0.9 kg\/m²\/layer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing\u003c\/td\u003e\n      \u003ctd\u003eComp. A : Comp. B = 78 : 22 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n      \u003ctd\u003eBelow 4% moisture content\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoot traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 24 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull cure\u003c\/td\u003e\n      \u003ctd\u003eApprox. 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCombination with Sikafloor systems\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-359 N is often considered as a sealing layer over broadcast systems and industrial floors. With \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e, it can be part of a more durable system solution when UV resistance, a matt finish and slip resistance are important. For the correct selection, the substrate, loading, moisture and required slip-resistance class must be assessed.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send details of whether the system is smooth or quartz-broadcast, whether the area is a car park, ramp, warehouse or service area, and what mechanical loading is expected. This makes it possible to confirm whether Sikafloor®-359 N is the correct polyurethane seal coat for the specific floor.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"32.5kg \/ RAL7032","offer_id":49285558239556,"sku":"119198","price":507.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-359N-Poliuretanovo_tvardo-elastichnozapechatvashtopokritie.webp?v=1726755659"},{"product_id":"sikafloor-304-w-poliuretanovo-matovo-zapechatvashto-pokritie-na-vodna-osnova","title":"Sikafloor®-304 W - Matte Polyurethane Sealing Coat","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-304 W\u003c\/strong\u003e is a 2-component, water-based polyurethane matte sealing coat. It is used as a matte sealer in Sika ComfortFloor systems where low odour, low VOC content, UV resistance and easy cleaning are important.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikafloor 304 W?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-304 W when the flooring system requires a \u003cstrong\u003ematte polyurethane sealer\u003c\/strong\u003e instead of a gloss finish. The product is suitable for professionally installed Sika ComfortFloor systems and for projects where comfort, appearance and easy maintenance are more important than heavy industrial loading.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-based and practically odourless when applied according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eMatte finish after full drying.\u003c\/li\u003e\n  \u003cli\u003eGood UV resistance and resistance to yellowing.\u003c\/li\u003e\n  \u003cli\u003eEasy-to-clean surface.\u003c\/li\u003e\n  \u003cli\u003eLow VOC content; the TDS states VOC \u0026lt; 100 g\/l according to EPA Reference Test Method 24.\u003c\/li\u003e\n  \u003cli\u003eCE marking according to EN 13813 and EN 1504-2 as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component water-based polyurethane sealer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e7.5 kg set A+B\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.13 kg\/m²\/layer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing\u003c\/td\u003e\n      \u003ctd\u003eComponent A : Component B = 80 : 20 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoot traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 16 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull curing\u003c\/td\u003e\n      \u003ctd\u003eApprox. 4 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere does this product perform best?\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-304 W performs best as the final matte coat in a specified Sika ComfortFloor system. It is not a universal varnish for every substrate. The substrate must be clean, dry and free from dust, grease, old coatings or impregnations. If you are working on a cementitious self-levelling floor such as \u003ca href=\"\/en\/products\/sikafloor-432-decocem-tsimentov-sastav-za-samorazlivni-podove-pri-visoko-natovarvane-3-30mm\"\u003eSikafloor®-432 DecoCem\u003c\/a\u003e, the choice of sealer must be made according to the expected load and the system data sheet.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send details of the system on which the product will be applied, the area, the desired finish and the working conditions. This allows confirmation of whether Sikafloor®-304 W is the correct matte sealer or whether a more resistant industrial solution is required.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"7.5kg","offer_id":49285573017924,"sku":"717762","price":210.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-304W-Poliuretanovo_matovozapechatvashtopokritienavodnaosnova.webp?v=1726756457"},{"product_id":"sikadecor-801-nature-dekorativen-tsveten-mikrotsiment-za-interiorni-prilozhenia","title":"SikaDecor®-801 Nature - decorative microcement for walls and floors","description":"\u003cp\u003e\u003cstrong\u003eSikaDecor®-801 Nature\u003c\/strong\u003e is a 2-component decorative microcement for seamless interior coatings on walls and floors. It is used as a visible finish coat in SikaDecor \/ Sika® EmotionFloor systems where a thin decorative surface with a modern mineral appearance is required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaDecor 801 Nature?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaDecor®-801 Nature when you need a \u003cstrong\u003emicrocement for interior walls and floors\u003c\/strong\u003e in homes, offices, lobbies, shops or public buildings. The product is suitable for cementitious and gypsum substrates, but it must be considered as part of a system: correct preparation, suitable primer, possible reprofiling with \u003ca href=\"\/en\/products\/sikadecor-803-nature-polimer-modifitsiran-tsimentov-raztvor-za-reprofilirane\"\u003eSikaDecor®-803 Nature\u003c\/a\u003e and a sealing coat selected according to the expected load.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDecorative seamless coating for interior walls and floors.\u003c\/li\u003e\n  \u003cli\u003eGood UV resistance and high adhesion to a correctly prepared substrate.\u003c\/li\u003e\n  \u003cli\u003eExcellent workability and the option to create an individual decorative finish.\u003c\/li\u003e\n  \u003cli\u003ePre-dosed packaging for more controlled mixing.\u003c\/li\u003e\n  \u003cli\u003eVapour-permeable product based on polymer-modified microcement.\u003c\/li\u003e\n  \u003cli\u003eSystem solution with SikaDecor® Color, SikaTop® primers, SikaDecor®-803 Nature and a suitable sealer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component polymer-modified microcement\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e13 kg set: comp. A 3 kg + comp. B 10 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePigment\u003c\/td\u003e\n      \u003ctd\u003eSikaDecor® Color Pigment 500 ml for one mix; for terracotta, clay and clover - 2 x 500 ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.75 kg\/m²\/mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDecorative wall system\u003c\/td\u003e\n      \u003ctd\u003e2-3 coats at approx. 0.35-0.45 kg\/m²\/coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended final thickness\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.5-2 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +8 °C to +30 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePot life\u003c\/td\u003e\n      \u003ctd\u003eApprox. 30 minutes at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSystem ready for use with sealer\u003c\/td\u003e\n      \u003ctd\u003eApprox. 4 days at +23 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSystem and compatible products\u003c\/h2\u003e\n\u003cp\u003eOn uneven walls or tile joints, the first coat is usually applied with \u003ca href=\"\/en\/products\/sikadecor-803-nature-polimer-modifitsiran-tsimentov-raztvor-za-reprofilirane\"\u003eSikaDecor®-803 Nature\u003c\/a\u003e. For cementitious wall substrates, the system uses \u003ca href=\"\/en\/products\/sikatop-10-grund-na-vodna-osnova-za-tsimentovi-povarhnosti\"\u003eSikaTop®-10\u003c\/a\u003e, while for gypsum and highly absorbent wall substrates it uses \u003ca href=\"\/en\/products\/sikatop-50-grund-na-vodna-osnova-za-absorbirashti-osnovi\"\u003eSikaTop®-50\u003c\/a\u003e. The final protection is selected according to the load; the Sika® EmotionFloor TDS specifies sealing coats with Sikafloor®-304 W, while for higher floor loads a system solution with Sikafloor®-169 may be considered.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSikaDecor®-801 Nature must not be in permanent contact with water.\u003c\/li\u003e\n  \u003cli\u003eFreshly applied material must be protected from moisture, condensation, wind and rain for at least 24 hours.\u003c\/li\u003e\n  \u003cli\u003eCracks, construction joints and expansion joints must be treated correctly before application.\u003c\/li\u003e\n  \u003cli\u003eThe colour may change depending on the application conditions and the type of sealer, so for specific aesthetic requirements it is advisable to prepare a trial area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eFor accurate consumption and the correct system, send the area, photos of the substrate, whether it will be applied on a wall or floor, whether there are tiles, joints, cracks or moisture, and what finish you are looking for. This allows the primer, preparation, number of coats and suitable sealer to be confirmed.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"13kg.","offer_id":49285622759748,"sku":"466576","price":79.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaDecor_-801Nature-Dekorativentsvetenmikrotsimentzainteriorniprilozhenia.webp?v=1726756669"},{"product_id":"sikadecor-803-nature-polimer-modifitsiran-tsimentov-raztvor-za-reprofilirane","title":"SikaDecor®-803 Nature - Leveling Mortar before Microcement","description":"\u003cp\u003e\u003cstrong\u003eSikaDecor®-803 Nature\u003c\/strong\u003e is a 2-component polymer-modified cementitious mortar for leveling and reprofiling before decorative microcement coatings. It is used as a preparatory layer in SikaDecor \/ Sika® EmotionFloor systems where the substrate has joints, uneven areas, holes, or requires a stable mineral layer before \u003ca href=\"\/en\/products\/sikadecor-801-nature-dekorativen-tsveten-mikrotsiment-za-interiorni-prilozhenia\"\u003eSikaDecor®-801 Nature\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eWhen is SikaDecor 803 Nature used?\u003c\/h2\u003e\n\u003cp\u003eThe product is the right choice when a substrate needs to be prepared before microcement: concrete, cement mortar, brick, old tiles on walls and floors, or other porous substrates. It can be used indoors and outdoors, but only on a sound, prepared substrate and as part of a complete system with primer, decorative layer, and sealer.\u003c\/p\u003e\n\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLevels and reprofiles the substrate before decorative microcement coatings.\u003c\/li\u003e\n  \u003cli\u003eSuitable for old ceramic tiles when they are well bonded to the substrate.\u003c\/li\u003e\n  \u003cli\u003eWorks on concrete, cement mortars, brick, and porous substrates.\u003c\/li\u003e\n  \u003cli\u003ePre-dosed 30 kg pack.\u003c\/li\u003e\n  \u003cli\u003eEasy application and low shrinkage according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical reference values from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component polymer-modified cementitious mortar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e30 kg pre-dosed pack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer thickness for reprofiling\u003c\/td\u003e\n      \u003ctd\u003e2-8 mm before the decorative layer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2.0 kg powder material\/m²\/mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFresh mortar density\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2.00 kg\/L at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +8 °C to +30 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time before next layer\u003c\/td\u003e\n      \u003ctd\u003eApprox. 24 hours, depending on climatic conditions and the substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHow does it fit into the SikaDecor system?\u003c\/h2\u003e\n\u003cp\u003eOn non-porous substrates, including old tiles, the TDS recommends a bonding layer with \u003ca href=\"\/en\/products\/sikatop-10-grund-na-vodna-osnova-za-tsimentovi-povarhnosti\"\u003eSikaTop®-10\u003c\/a\u003e. If the substrate is uneven, has holes, joints, or level differences, it is reprofiled with SikaDecor®-803 Nature. Then a minimum of two or three layers of \u003ca href=\"\/en\/products\/sikadecor-801-nature-dekorativen-tsveten-mikrotsiment-za-interiorni-prilozhenia\"\u003eSikaDecor®-801 Nature\u003c\/a\u003e and a suitable transparent sealing layer are applied.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe substrate must be clean, sound, and free from dust, friable particles, oils, grease, and old weak coatings.\u003c\/li\u003e\n  \u003cli\u003eOld ceramic coverings must be well bonded and degreased\/sanded.\u003c\/li\u003e\n  \u003cli\u003eDo not add extra water during smoothing, as this may cause discoloration and cracking.\u003c\/li\u003e\n  \u003cli\u003eFreshly applied material must be protected from frost, wind, and direct sunlight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, leveling thickness, photos of the substrate, and information on whether there are old tiles, joints, hollow areas, or moisture. This makes it possible to calculate the real consumption and select the correct primer and sealing system.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"30kg.","offer_id":49285677875524,"sku":null,"price":90.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaDecor_-803Nature-Polimer-modifitsirantsimentovraztvorzareprofilirane.webp?v=1726757746"},{"product_id":"sikatop-10-grund-na-vodna-osnova-za-tsimentovi-povarhnosti","title":"SikaTop®-10 - Primer for SikaDecor on Mineral and Smooth Substrates","description":"\u003cp\u003e\u003cstrong\u003eSikaTop®-10\u003c\/strong\u003e is a ready-to-use, water-based primer for SikaDecor®-803 Nature on mineral substrates and old ceramic tiles. The product is part of the Sika® EmotionFloor \/ SikaDecor system and is used to provide adhesion before the reprofiling coat.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should SikaTop 10 be selected?\u003c\/h2\u003e\n\u003cp\u003eSikaTop®-10 is suitable when mineral substrates, cementitious screeds or old ceramic tiles need to be prepared before \u003ca href=\"\/en\/products\/sikadecor-803-nature-polimer-modifitsiran-tsimentov-raztvor-za-reprofilirane\"\u003eSikaDecor®-803 Nature\u003c\/a\u003e. In the TDS, the product is also stated as \u003cstrong\u003enot suitable for horizontal surfaces\u003c\/strong\u003e, so for floor systems the specific system build-up and substrate condition should be checked before selecting the primer.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eExcellent adhesion on porous and glazed surfaces.\u003c\/li\u003e\n  \u003cli\u003eImproves adhesion within the SikaDecor system.\u003c\/li\u003e\n  \u003cli\u003ePrevents water loss into the substrate.\u003c\/li\u003e\n  \u003cli\u003eReady to use and easy to apply.\u003c\/li\u003e\n  \u003cli\u003eEconomical, with consumption of approximately 0.2–0.5 kg\/m²\/coat.\u003c\/li\u003e\n  \u003cli\u003eResistant to alkaline pH and suitable for substrates with higher moisture content, without standing water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003ePrimer based on styrene-acrylate copolymer with mineral fillers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e5 kg and 20 kg pail\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAppearance\u003c\/td\u003e\n      \u003ctd\u003eReddish with fillers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.32 kg\/l at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.2–0.5 kg\/m²\/coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +10 °C to +30 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time before SikaDecor-803 Nature\u003c\/td\u003e\n      \u003ctd\u003eMinimum approx. 1 hour at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, clean, dry and free from dust, oils, grease and weak old coatings. Tiles must be abraded, and dust and loose particles must be completely removed. SikaTop®-10 should be homogenised for at least one minute and applied by brush or roller.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease tell us what the substrate is, whether it is a wall or floor, whether there are tiles, moisture or old coatings, and which SikaDecor layer will be applied. This is important because primer selection in a microcement system depends on the substrate, absorption and loading.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5kg.","offer_id":49285705367876,"sku":"441145","price":34.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaTop_-10-Grundnavodnaosnovazatsimentovipovarhnosti.webp?v=1726758100"},{"product_id":"sikatop-50-grund-na-vodna-osnova-za-absorbirashti-osnovi","title":"SikaTop®-50 – Primer for Absorbent Substrates before SikaDecor","description":"\u003cp\u003e\u003cstrong\u003eSikaTop®-50\u003c\/strong\u003e is a ready-to-use, water-based acrylic primer for highly absorbent wall substrates before SikaDecor®-803 Nature. It is used in SikaDecor \/ Sika® EmotionFloor systems when the substrate is gypsum-based, porous, cementitious, masonry, natural stone or artificial stone.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaTop 50?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaTop®-50 when the substrate is highly absorbent and the extraction of the liquid phase from the skim coat needs to be controlled. Typical applications include wall surfaces made of gypsum, porous cementitious skim coats, masonry, natural stone and artificial stone. In the TDS, the product is stated as \u003cstrong\u003enot suitable for horizontal surfaces\u003c\/strong\u003e, so it should not automatically be considered a universal floor primer.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eExcellent adhesion on absorbent substrates.\u003c\/li\u003e\n  \u003cli\u003ePrevents excessively rapid loss of the liquid phase from the skim coat into the substrate.\u003c\/li\u003e\n  \u003cli\u003eReady to use and easy to apply.\u003c\/li\u003e\n  \u003cli\u003eEconomical, with low consumption per coat.\u003c\/li\u003e\n  \u003cli\u003eResistant to alkaline pH.\u003c\/li\u003e\n  \u003cli\u003eCan be applied on surfaces with high moisture, but without standing water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eWater-based acrylic primer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e5 kg and 25 kg canister\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAppearance\u003c\/td\u003e\n      \u003ctd\u003eWhite liquid\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.04 kg\/L at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.12–0.15 kg\/m²\/coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time before SikaDecor®-803 Nature\u003c\/td\u003e\n      \u003ctd\u003eMinimum approx. 30 minutes and maximum 48 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, clean and free from dust, oils, old coatings and impregnations. Before application, all loose particles must be removed. SikaTop®-50 should be homogenised for approximately one minute and applied by brush or roller to ensure good penetration into the substrate.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the substrate type, area, photos and information on whether the work will be carried out on a wall or floor. If the substrate is not highly absorbent, another primer or a different system preparation may be required before \u003ca href=\"\/en\/products\/sikadecor-803-nature-polimer-modifitsiran-tsimentov-raztvor-za-reprofilirane\"\u003eSikaDecor®-803 Nature\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"5kg.","offer_id":49285719720260,"sku":"411817","price":30.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaTop_-50-Grundnavodnaosnovazaabsorbirashtiosnovi.webp?v=1726758394"},{"product_id":"sikafloor-400-n-elastic-ednokomponentno-poliuretanovo-visokoelastichno-pokritie","title":"Sikafloor®-400 N Elastic - Elastic Polyurethane Coating for Terraces","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-400 N Elastic\u003c\/strong\u003e is a 1-component, highly elastic polyurethane coating for concrete and cementitious substrates. It is used as a UV-resistant, waterproof and crack-bridging coating for balconies, terraces, walkways, pedestrian paths and other areas subject to light to moderate mechanical loads.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor 400 N Elastic?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-400 N Elastic when you need a \u003cstrong\u003epolyurethane coating for a terrace or balcony\u003c\/strong\u003e that must remain elastic, withstand weather exposure and bridge cracks as part of a system solution. It can be applied as a smooth or anti-slip coating, depending on the project requirements.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component, highly elastic polyurethane coating.\u003c\/li\u003e\n  \u003cli\u003eWaterproof and UV-resistant coating.\u003c\/li\u003e\n  \u003cli\u003eCrack-bridging and non-yellowing according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eResistant to various climatic conditions.\u003c\/li\u003e\n  \u003cli\u003eOption for a smooth or anti-slip surface.\u003c\/li\u003e\n  \u003cli\u003eCE marking according to EN 13813 and EN 1504-2, as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e1-component polyurethane elastic coating\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e6 kg and 18 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.4-1.5 kg\/m²\/mm depending on the application method and system\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n      \u003ctd\u003eBelow 4% moisture content\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRain resistance\u003c\/td\u003e\n      \u003ctd\u003eApprox. 5 hours at +20 °C and 50% relative humidity\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePedestrian traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 6-24 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull curing\u003c\/td\u003e\n      \u003ctd\u003eApprox. 5-9 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant for terraces and balconies\u003c\/h2\u003e\n\u003cp\u003eFor terraces and balconies, the final result depends on substrate preparation, drainage details, upstands, joints and connections to walls. Sikafloor®-400 N Elastic is suitable for light to moderate mechanical loads, but it does not replace a professional assessment of cracks, moisture and falls. For system solutions, also see the \u003ca href=\"\/en\/collections\/podovi-pokritia-balkoni-terasi\"\u003eSika terrace and balcony waterproofing\u003c\/a\u003e category.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area size, photos, whether there is an existing covering, any cracks or moisture, details around drains, and whether you want a smooth or anti-slip finish. This helps confirm whether Sikafloor®-400 N Elastic is the right product and which system should be specified.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"6kg. \/ RAL1001","offer_id":49285740953924,"sku":"50326","price":113.4,"currency_code":"EUR","in_stock":true},{"title":"6kg. \/ RAL7032","offer_id":49285758943556,"sku":"180367","price":113.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-400NElastic-Ednokomponentnopoliuretanovovisokoelastichnopokritie.webp?v=1726758731"},{"product_id":"sikalastic-490-t-prozrachna-ednokomponentna-techna-poliuretanova-hidroizolatsionna-membrana","title":"Sikalastic®-490 T - transparent waterproofing for terraces and balconies","description":"\u003cp\u003e\u003cstrong\u003eSikalastic®-490 T\u003c\/strong\u003e is a transparent 1-component polyurethane waterproofing membrane with a glossy finish. After curing, it forms a watertight layer that retains its transparency and elasticity and is suitable for protection over tiles on balconies and terraces.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikalastic 490 T?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikalastic®-490 T when you need \u003cstrong\u003etransparent waterproofing over existing tiles\u003c\/strong\u003e without hiding the appearance of the floor finish. Typical applications include balconies, terraces, patios, greenhouses and skylights, as well as protection against frost, carbon dioxide and acid rain.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTransparent UV-resistant polyurethane membrane.\u003c\/li\u003e\n  \u003cli\u003eResistant to yellowing and weathering.\u003c\/li\u003e\n  \u003cli\u003eSuitable for natural stone, ceramics and polycarbonate according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eAllows pedestrian traffic after curing.\u003c\/li\u003e\n  \u003cli\u003eEasy to clean and resistant to alkaline compounds and chemicals.\u003c\/li\u003e\n  \u003cli\u003eCan be applied as a refreshing coating or as a waterproofing membrane, depending on the number of coats and consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e1-component transparent polyurethane membrane\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e5 kg and 20 kg metal pails\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAppearance\u003c\/td\u003e\n      \u003ctd\u003eTransparent liquid\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.99 kg\/l at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption for dust protection\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.2 kg\/m² for one coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption for waterproofing under light traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.7 kg\/m² in two coats of 0.3-0.4 kg\/m² each\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption on absorbent substrates or under intensive traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.0 kg\/m² in three coats of 0.3-0.4 kg\/m² each\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n      \u003ctd\u003eMaximum 4%\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePedestrian traffic\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 24-48 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull curing\u003c\/td\u003e\n      \u003ctd\u003eApprox. 7 days\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePrimer and application\u003c\/h2\u003e\n\u003cp\u003eGlazed surfaces such as porcelain tiles and glass must be primed with \u003ca href=\"\/en\/products\/sika-primer-490-t-grund-za-gladki-i-glazirani-povarhnosti\"\u003eSika® Primer-490 T\u003c\/a\u003e. After the primer has dried, apply Sikalastic®-490 T by brush or roller. Wait at least 12 hours before applying a second coat, but not more than 18 hours according to the TDS. For higher waterproofing performance and improved resistance to pedestrian traffic, a third coat may be applied.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use on concrete, other cementitious substrates or unglazed terracotta.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for permanent water exposure, including swimming pools and fountains.\u003c\/li\u003e\n  \u003cli\u003eThe substrate must be dry, without rising moisture, and with moisture content up to 4%.\u003c\/li\u003e\n  \u003cli\u003eThe wet surface may be slippery; for an anti-slip surface, the TDS allows broadcasting dry, clean quartz sand into the fresh product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, photos of the floor finish, the type of tile or stone, and whether there are cracks, moisture, standing water or an old coating. This helps assess whether Sikalastic®-490 T is the right transparent solution or whether another waterproofing system is required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikalastic490t\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikalastic®-490 T\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe key point:\u003c\/strong\u003e Sikalastic-490 T is suitable when the goal is transparent waterproofing over a sound existing floor finish. If tiles are hollow, joints are compromised or there is an active leak, the substrate and details must be assessed first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor system selection on terraces, see \u003ca href=\"\/en\/collections\/podovi-pokritia-balkoni-terasi\"\u003ewaterproofing for terraces and balconies\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a primer for smooth and glazed substrates, see \u003ca href=\"\/en\/products\/sika-primer-490-t-grund-za-gladki-i-glazirani-povarhnosti\"\u003eSika® Primer-490 T\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor an opaque elastic finish, compare with \u003ca href=\"\/en\/products\/sikafloor-400-n-elastic-ednokomponentno-poliuretanovo-visokoelastichno-pokritie\"\u003eSikafloor®-400 N Elastic\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"5kg.","offer_id":49285764546884,"sku":"158802","price":259.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikalastic_-490T-Prozrachna_ednokomponentna_technapoliuretanovahidroizolatsionnamembrana.webp?v=1726759322"},{"product_id":"sikafloor-102-level-polimer-modifitsiran-tsimentov-samorazliven-pod-2-15mm","title":"Sikafloor®-102 Level - self-leveling screed 2-15 mm","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-102 Level\u003c\/strong\u003e is a 1-component, polymer-modified, cementitious self-leveling screed for interior floor leveling and smoothing. It is applied in a layer from 2 to 15 mm before floor finishes such as ceramic and stone tiles, PVC, carpets, floating wood and laminate flooring systems.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor 102 Level?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-102 Level when you need a \u003cstrong\u003eself-leveling screed for interior areas\u003c\/strong\u003e to level the substrate before the final floor covering. It is most commonly used in residential and commercial areas where a smooth and level substrate is required, not a final industrial floor finish.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVery good flow and cohesion of the fresh material.\u003c\/li\u003e\n  \u003cli\u003eEasy manual or pump application.\u003c\/li\u003e\n  \u003cli\u003eLow shrinkage and good adhesion to a properly prepared substrate.\u003c\/li\u003e\n  \u003cli\u003eSuitable for underfloor heating according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eSuitable for loading from chairs with castors at layer thicknesses above 3 mm.\u003c\/li\u003e\n  \u003cli\u003eContains no casein or formaldehyde.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003ePolymer-modified cementitious self-leveling screed\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer thickness\u003c\/td\u003e\n      \u003ctd\u003e2-15 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.5 kg\/m²\/mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing water\u003c\/td\u003e\n      \u003ctd\u003e5.75-6.00 l per 25 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWorkability\u003c\/td\u003e\n      \u003ctd\u003eApprox. 30 minutes at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoot traffic\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 3 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCovering at layer thickness up to 3 mm\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 24 hours; each additional mm extends the time by approx. 24 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStandard\u003c\/td\u003e\n      \u003ctd\u003eEN 13813: CT-C20-F5, reaction to fire A1fl\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePrimer and preparation\u003c\/h2\u003e\n\u003cp\u003eThe choice of primer depends on the quality of the substrate and the layer thickness. The TDS specifies acrylate primers, as well as epoxy primers such as \u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e and \u003ca href=\"\/en\/products\/sikafloor-151-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-151\u003c\/a\u003e with a quartz broadcast in certain systems. The substrate must be dry, sound, clean and free from dust, oils, weak layers or adhesive residues.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, required thickness, type of final floor covering and photos of the substrate. This allows an approximate consumption to be calculated and helps determine whether Sikafloor®-102 Level or a higher-grade self-leveling flooring product such as \u003ca href=\"\/en\/products\/sikafloor-432-decocem-tsimentov-sastav-za-samorazlivni-podove-pri-visoko-natovarvane-3-30mm\"\u003eSikafloor®-432 DecoCem\u003c\/a\u003e is more suitable.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"25 kg.","offer_id":49288944648516,"sku":"534391","price":18.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-102Level-Polimer-modifitsirantsimentovsamorazlivenpod-2-15mm.webp?v=1726815676"},{"product_id":"sikafloor-level-30-visokokachestvena-samorazlivna-barzovtvardyavashta-tsimentova-zamazka-4-30mm","title":"Sikafloor® Level-30 - self-leveling screed for exterior use 4-30 mm","description":"\u003cp\u003e\u003cstrong\u003eSikafloor® Level-30\u003c\/strong\u003e is a self-leveling cementitious screed for leveling and smoothing concrete floors and screeds in a layer of \u003cstrong\u003e4 to 30 mm\u003c\/strong\u003e in one working operation. It is suitable for interior use and can be used as a screed in exterior areas when sealed with a subsequent coating.\u003c\/p\u003e\n\n\u003ch2\u003eWhen is a self-leveling screed suitable for exterior use?\u003c\/h2\u003e\n\u003cp\u003eLevel-30 is a good choice when a concrete substrate needs to be leveled before ceramic tiles, parquet, textile and resilient floor coverings, or seamless resin-based flooring systems. For exterior application, it must not be left without suitable final protection - the system must be completed with a coating selected for exposure to water, temperature changes, and loads.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages according to the technical data\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-leveling and highly fluid consistency for manual application or pump application.\u003c\/li\u003e\n  \u003cli\u003eLayer thickness from 4 to 30 mm in one working operation.\u003c\/li\u003e\n  \u003cli\u003eSuitable for medium to high loads in industrial premises when sealed with a polyurethane or epoxy finishing coating.\u003c\/li\u003e\n  \u003cli\u003eWalkable after approximately 3-4 hours at +20 °C.\u003c\/li\u003e\n  \u003cli\u003eSuitable for screeds with underfloor heating.\u003c\/li\u003e\n  \u003cli\u003eExcellent resistance to de-icing salts according to the stated product characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eFor accurate product selection, send the area, condition of the concrete, required thickness, whether the area is interior or exterior, what floor covering or finishing coating will be applied afterwards, and whether there will be vehicle or industrial loads. This allows consumption to be calculated more accurately and helps avoid incorrect use of the screed as a final coating where a protective layer is required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-level30\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated systems for Sikafloor® Level-30\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Level-30 solves the leveling requirement, but exterior application and loaded areas require the correct primer and protective finish. This page therefore matches searches for “self-leveling screed for exterior use” more accurately and points to a real system, not just a single product.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor preparation before a self-leveling screed, see \u003ca href=\"\/en\/products\/sika-level-01-primer-akrilen-grund-i-zapechatka-za-mineralni-osnovi\"\u003eSika® Level-01 Primer\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor exterior terraces with subsequent waterproofing, view the \u003ca href=\"\/en\/collections\/podovi-pokritia-balkoni-terasi\"\u003eterrace and balcony systems\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor resin floors over a prepared substrate, see \u003ca href=\"\/en\/collections\/pokritia-nastilki-avtomobilni-parkingi-i-garzhi\"\u003eSikafloor systems for garages and car parks\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"25 kg.","offer_id":49288949825860,"sku":"162680","price":45.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_Level-30-Visokokachestvenasamorazlivnabarzovtvardyavashtatsimentovazamazka-4-30mm.webp?v=1726816082"},{"product_id":"sikafloor-432-decocem-tsimentov-sastav-za-samorazlivni-podove-pri-visoko-natovarvane-3-30mm","title":"Sikafloor®-432 DecoCem – Self-Leveling Cementitious Floor 3–30 mm","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-432 DecoCem\u003c\/strong\u003e is a cementitious self-leveling floor for industrial and commercial areas where a durable final layer or a leveling layer with high abrasion resistance is required. It is suitable for concrete surfaces in warehouses, garages, production halls and supermarkets, as well as a base layer under resin-based Sikafloor systems.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor®-432 DecoCem?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-432 DecoCem when you need a \u003cstrong\u003e3–30 mm self-leveling cementitious floor\u003c\/strong\u003e that can be applied manually or by pump and provide a strong, non-dusting surface. The product is especially suitable for refurbishment of interior industrial floors where return-to-service time is important.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-leveling cementitious compound with good flow and suitability for pump application.\u003c\/li\u003e\n  \u003cli\u003eApplied in a layer from 3 to 30 mm, depending on the substrate condition and system solution.\u003c\/li\u003e\n  \u003cli\u003eSuitable for warehouses, garages, production halls, supermarkets and other high-load interior areas.\u003c\/li\u003e\n  \u003cli\u003eNon-dusting surface with high abrasion resistance.\u003c\/li\u003e\n  \u003cli\u003eSuitable for underfloor heating.\u003c\/li\u003e\n  \u003cli\u003eVery low emissions and reduced chromium content according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eCementitious self-leveling floor \/ screed\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer thickness\u003c\/td\u003e\n      \u003ctd\u003e3–30 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.9 kg\/m²\/mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing water\u003c\/td\u003e\n      \u003ctd\u003e4.5–5.0 l per 25 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePot life\u003c\/td\u003e\n      \u003ctd\u003eApprox. 30 minutes at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoot traffic\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 3–4 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull loading\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 7 days\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStandard\u003c\/td\u003e\n      \u003ctd\u003eEN 13813: CT-C40-F7-AR0.5\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePrimer, sealer and system\u003c\/h2\u003e\n\u003cp\u003eThe correct primer depends on the substrate and layer thickness. The TDS specifies acrylate primers and epoxy primers such as \u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e, \u003ca href=\"\/en\/products\/sikafloor-151-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-151\u003c\/a\u003e and Sikafloor®-169 with quartz broadcast. For low mechanical loads, \u003ca href=\"\/en\/products\/sikafloor-304-w-poliuretanovo-matovo-zapechatvashto-pokritie-na-vodna-osnova\"\u003eSikafloor®-304 W\u003c\/a\u003e may be considered, while for higher industrial loads a system solution with Sikafloor®-169 and a seal coat may be required.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the floor area, required thickness, photos of the substrate, and information on whether there are cracks, old coatings, moisture or underfloor heating. This allows us to check whether Sikafloor®-432 DecoCem is the right self-leveling floor for the project and which primer, sealer and consumption should be planned.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikafloor432\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikafloor®-432 DecoCem\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e Sikafloor-432 DecoCem is a self-leveling cementitious floor for higher loads, but the system must be planned according to the substrate, primer, required thickness, final protection and whether it will serve as the final layer or as a base layer under a resin coating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor other self-leveling screeds, see \u003ca href=\"\/en\/collections\/zamazki-samorazlivni-zamazki-za-izravnyavane-i-podova-zashtita\"\u003eself-leveling screeds and floor protection\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor 4–30 mm leveling in interior\/exterior applications, compare with \u003ca href=\"\/en\/products\/sikafloor-level-30-visokokachestvena-samorazlivna-barzovtvardyavashta-tsimentova-zamazka-4-30mm\"\u003eSikafloor® Level-30\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor warehouses and work areas, see \u003ca href=\"\/en\/collections\/podovi-pokritia-za-skladove-i-rabotni-pomeshtenia\"\u003efloor coatings for warehouses and work areas\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"25 kg. \/ Natural gray","offer_id":49288963686724,"sku":"538153","price":34.2,"currency_code":"EUR","in_stock":true},{"title":"25 kg. \/ Light gray","offer_id":49288982954308,"sku":"538154","price":43.32,"currency_code":"EUR","in_stock":true},{"title":"25 kg. \/ Dark gray","offer_id":49288982987076,"sku":"538155","price":41.04,"currency_code":"EUR","in_stock":true},{"title":"25 kg. \/ Black","offer_id":49288983019844,"sku":"538156","price":42.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-432DecoCem-Tsimentovsastavzasamorazlivnipodoveprivisokonatovarvane-3-30mm.webp?v=1726816369"},{"product_id":"sika-level-01-primer-akrilen-grund-i-zapechatka-za-mineralni-osnovi","title":"Sika® Level-01 Primer - Acrylic Primer for Self-Leveling Screeds","description":"\u003cp\u003e\u003cstrong\u003eSika® Level-01 Primer\u003c\/strong\u003e is a 1-component, water-based acrylic primer and sealer for mineral substrates before applying cementitious self-leveling screeds, industrial thick-layer screeds and leveling mortars. The primer reduces water loss into the substrate, limits bubble formation and improves adhesion between the substrate and the subsequent layer.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sika Level-01 Primer?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Level-01 Primer when preparing concrete, cement screeds or anhydrite screeds before Sika® Level or another compatible cementitious self-leveling compound. It is a system primer for controlled absorption and more reliable adhesion, especially on porous mineral substrates.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSeals concrete and mineral substrates in one working operation.\u003c\/li\u003e\n  \u003cli\u003ePrevents excessively rapid water loss from the self-leveling compound into the substrate.\u003c\/li\u003e\n  \u003cli\u003eLimits bubble formation in the screed.\u003c\/li\u003e\n  \u003cli\u003eImproves adhesion between the substrate and the leveling mortar.\u003c\/li\u003e\n  \u003cli\u003eDries quickly and forms a film.\u003c\/li\u003e\n  \u003cli\u003eEasy to apply with a brush or roller.\u003c\/li\u003e\n  \u003cli\u003eCan be used at different dilution ratios depending on substrate porosity.\u003c\/li\u003e\n  \u003cli\u003eEMICODE EC 1PLUS - very low emissions according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eWater-based acrylic resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhite liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.0 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolid content\u003c\/td\u003e\n\u003ctd\u003e~46% by weight, ~45% by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDilution\u003c\/td\u003e\n\u003ctd\u003eNormally 1:3 with water by volume; on very porous substrates 1:4 or 1:5 for the first coat and 1:3 for the second coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~0.10-0.20 kg\/m² per coat of diluted product\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +10 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRelative air humidity\u003c\/td\u003e\n\u003ctd\u003e≤75%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWorking time of diluted material\u003c\/td\u003e\n\u003ctd\u003eUp to 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time before cementitious self-leveling compound\u003c\/td\u003e\n\u003ctd\u003e~8-12 h at +10 °C, ~2-4 h at +20 °C, ~1.5-3 h at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be level, open-textured, clean and free from frost, water, cement laitance, oils, grease, paraffin, old coatings and weakly bonded particles. Sika® Level-01 Primer does not form a moisture vapor barrier and is not suitable as a primer for Sika® PU or AT adhesives. Do not allow puddles of primer to form, as excessive material may reduce adhesion strength.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the substrate type, area, porosity, planned self-leveling screed and site temperature. This helps determine the dilution ratio, number of coats and actual consumption.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5 l.","offer_id":49288989999428,"sku":"123311","price":48.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sika_Level-01Primer-Akrilengrundizapechatkazamineralniosnovi.webp?v=1726816949"},{"product_id":"sikafloor-3-quartztop-mineralen-povarhnosten-vtvarditel-za-podove","title":"Sikafloor®-3 QuartzTop - Mineral Surface Hardener for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-3 QuartzTop\u003c\/strong\u003e is a 1-component mineral dry shake for power-floated concrete, made with specially selected quartz mineral aggregates, cement, additives and pigments. It is used to create a wear-resistant surface layer on monolithic concrete floors in warehouses, factories, workshops, shopping centres and public spaces.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor 3 QuartzTop?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-3 QuartzTop when a fresh concrete floor requires a stronger, easier-to-maintain and more wear-resistant surface than standard concrete without a dry shake. It is an economical mineral dry shake for professional application on fresh concrete.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWear-resistant surface layer for monolithic concrete floors.\u003c\/li\u003e\n  \u003cli\u003eImpact resistance and longer service life compared with concrete without a dry shake.\u003c\/li\u003e\n  \u003cli\u003eDoes not release dust when correctly installed and maintained.\u003c\/li\u003e\n  \u003cli\u003eFast application onto fresh concrete.\u003c\/li\u003e\n  \u003cli\u003eEasy cleaning and maintenance.\u003c\/li\u003e\n  \u003cli\u003eIncreases resistance to oils and contamination.\u003c\/li\u003e\n  \u003cli\u003eHigh-quality factory-mixed product.\u003c\/li\u003e\n  \u003cli\u003eCE marked as cementitious screed CT-C70-F7-AR1.0 according to EN 13813, as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eNatural mineral aggregates with cement, additives and pigments\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eNatural, concrete grey; other colours on request\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~2250 kg\/m³ after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAbrasion resistance\u003c\/td\u003e\n\u003ctd\u003eClass AR1.0 according to EN 13892-4, BCA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~3-5 kg\/m², depending on the application method and concrete mix\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e~2.5-3.0 mm at the recommended consumption of ~5.0 kg\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003eFrom 30% to 98%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoot traffic\u003c\/td\u003e\n\u003ctd\u003e~18 h at +10 °C, ~12 h at +20 °C, ~8 h at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication and system products\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-3 QuartzTop is broadcast onto fresh concrete and finished with a power trowel. For optimal results, the concrete must be of consistent quality, have a suitable water\/cement ratio and a minimum strength of 25 N\/mm². After finishing, the surface is protected with a suitable impregnating sealer such as Sikafloor® ProSeal or Sikafloor® ProSeal-22, as stated in the TDS.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the floor area, floor loading, application conditions, colour and whether the application will be manual or machine-applied. If you need higher abrasion resistance and a heavier-duty solution, compare with Sikafloor®-2 SynTop.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"25 kg. natural","offer_id":49289779544388,"sku":"671971","price":11.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-3QuartzTop-Mineralenpovarhnostenvtvarditelzapodove.webp?v=1726830131"},{"product_id":"sikafloor-2-syntop-nemetalen-povarhnosten-vtvarditel-za-betonni-podove","title":"Sikafloor®-2 SynTop - Non-Metallic Hardener for Concrete Floors","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-2 SynTop\u003c\/strong\u003e is a 1-component, factory-produced, non-metallic synthetic dry-shake hardener for concrete floors, containing cement, hard aggregates, compatible additives and pigment. When broadcast and power-trowelled onto fresh concrete, it forms a very wear-resistant, smooth surface for warehouses, factories, workshops, hangars, supermarkets, offices and museums.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor 2 SynTop?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-2 SynTop when the concrete floor will be exposed to higher wear, impact loads or intensive service. Compared with a standard mineral dry shake, SynTop is intended for higher abrasion resistance and more demanding industrial conditions.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVery high wear resistance.\u003c\/li\u003e\n  \u003cli\u003eHigh impact resistance.\u003c\/li\u003e\n  \u003cli\u003eLonger service life compared with concrete without a dry-shake hardener.\u003c\/li\u003e\n  \u003cli\u003eDoes not require special maintenance when correctly installed.\u003c\/li\u003e\n  \u003cli\u003eCan provide an anti-slip surface.\u003c\/li\u003e\n  \u003cli\u003eDust-free.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance to oils and contamination.\u003c\/li\u003e\n  \u003cli\u003eCE marked as cementitious screed CT-C70-F7-AR0.5 according to EN 13813, as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eNatural and synthetic aggregates, cement, additives and pigments\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg bags\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eNatural, concrete grey; other colours on request\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum grain size\u003c\/td\u003e\n\u003ctd\u003eDmax 2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAbrasion resistance\u003c\/td\u003e\n\u003ctd\u003eClass AR0.5 according to EN 13892-4, BCA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompressive strength\u003c\/td\u003e\n\u003ctd\u003e≥70 MPa after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFlexural tensile strength\u003c\/td\u003e\n\u003ctd\u003e≥7.0 MPa after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eReaction to fire\u003c\/td\u003e\n\u003ctd\u003eA1fl according to EN 13501-1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~3-5 kg\/m² depending on application method and concrete mix design\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e~2.5-3.0 mm at the recommended consumption rate of ~5.0 kg\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoot traffic\u003c\/td\u003e\n\u003ctd\u003e~18 h at +10 °C, ~12 h at +20 °C, ~8 h at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication and limitations\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-2 SynTop is applied to fresh concrete manually or mechanically and finished by power trowelling. Do not add water to the surface where the dry shake has been applied. Do not use concrete with partial cement replacement by fly ash, as the mix becomes sticky and difficult to finish. The exact timing of broadcasting and the finishing sequence are critical for an even finish.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the floor area, expected loading, colour requirements, whether an anti-slip effect is required and the intended application method. For lighter service conditions, Sikafloor®-3 QuartzTop may be sufficient; for heavier loading, SynTop is the stronger choice.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"25 kg. \/ Red","offer_id":49289786327364,"sku":null,"price":16.23,"currency_code":"EUR","in_stock":false},{"title":"25 kg. \/ Green","offer_id":49289799991620,"sku":null,"price":19.68,"currency_code":"EUR","in_stock":false},{"title":"25 kg. \/ Natural CZ synthetic topping","offer_id":49289800024388,"sku":"405027","price":17.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-2SynTop-Nemetalenpovarhnostenvtvarditelzabetonnipodove.webp?v=1726830535"},{"product_id":"sikafloor-proseal-12-akrilaten-sastav-za-impregnirane-i-zapechatka-na-betonni-povarhnosti","title":"Sikafloor® ProSeal-12 – Concrete Impregnator and Sealer","description":"\u003cp\u003e\u003cstrong\u003eSikafloor® ProSeal-12\u003c\/strong\u003e is an acrylate formulation for \u003cstrong\u003eimpregnating and sealing concrete\u003c\/strong\u003e. It is used on fresh or already hardened concrete when the aim is to make the surface more resistant to wear, reduce dusting, and lower absorption of oils and contaminants.\u003c\/p\u003e\n\n\u003cp\u003eThe product is suitable for concrete floors and structures in garages, warehouses, work areas, auto repair shops, car parks, and other areas where untreated concrete dusts, becomes dirty easily, or requires more economical protection without installing a full epoxy flooring system.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikafloor® ProSeal-12?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor fresh concrete\u003c\/strong\u003e - when sealing is required after surface finishing to support proper drying and reduce rapid water loss.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor old or hardened concrete\u003c\/strong\u003e - when the floor dusts, absorbs contaminants, and needs surface strengthening and easier maintenance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor garages, warehouses, and workshops\u003c\/strong\u003e - when a practical concrete sealer is required instead of a thicker resin system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor industrial and commercial areas\u003c\/strong\u003e - when the objective is improved wear resistance and lower surface absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat does it do, and what does it not do?\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eEffect\u003c\/th\u003e\n      \u003cth\u003eWhat it means in practice\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduces dusting\u003c\/td\u003e\n      \u003ctd\u003eSuitable for concrete surfaces that release dust during traffic, cleaning, or service.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eImproves wear resistance\u003c\/td\u003e\n      \u003ctd\u003eHelps create a stronger surface layer, but does not replace a full epoxy system under heavy-duty loads.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduces absorption\u003c\/td\u003e\n      \u003ctd\u003eImproves resistance to oils and contaminants, but should not be regarded as a deep water-repellent facade impregnation treatment.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEconomical protection\u003c\/td\u003e\n      \u003ctd\u003eA good choice when the aim is to seal concrete, not to create a decorative or thick-layer floor finish.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eProSeal-12 or another concrete impregnator?\u003c\/h2\u003e\n\u003cp\u003eIf you need a \u003ca href=\"\/en\/collections\/%D0%B8%D0%BC%D0%BF%D1%80%D0%B5%D0%B3%D0%BD%D0%B8%D1%80%D0%B0%D0%BD%D0%B5-%D0%B8-%D0%B7%D0%B0%D0%BF%D0%B5%D1%87%D0%B0%D1%82%D0%B2%D0%B0%D0%BD%D0%B5-%D0%BD%D0%B0-%D0%B1%D0%B5%D1%82%D0%BE%D0%BD\"\u003econcrete impregnator\u003c\/a\u003e for floors that dust and absorb liquids, Sikafloor® ProSeal-12 is a logical choice. If the main objective is water repellency on cementitious surfaces or facades, see \u003ca href=\"\/en\/products\/sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi\"\u003eSikagard®-700 S\u003c\/a\u003e. If the floor will be exposed to more serious loads, tyre traffic, or chemical exposure, consider \u003ca href=\"\/en\/collections\/epoksidni-podovi-sistemi\"\u003eepoxy flooring systems\u003c\/a\u003e or \u003ca href=\"\/en\/products\/sikafloor-2510-w-epoksidno-podovo-pokritie-na-vodna-osnova\"\u003eSikafloor®-2510 W\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eApplication and preparation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOn fresh concrete, apply after the surface finishing work has been completed.\u003c\/li\u003e\n  \u003cli\u003eOn old concrete, all dust, loose material, oils, and contaminants must be removed before application.\u003c\/li\u003e\n  \u003cli\u003eIt may be applied with a low-pressure sprayer, brush, or roller, depending on site conditions and the product data sheet.\u003c\/li\u003e\n  \u003cli\u003eIf there is any doubt about compatibility, absorption, or appearance, first carry out a test area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackaging and selection\u003c\/h2\u003e\n\u003cp\u003eAvailable packaging: \u003cstrong\u003e5 l, 15 l, and 200 l\u003c\/strong\u003e. For accurate selection, send the area in square metres, photos of the concrete, information on whether it is fresh or old, and how the area will be used. This makes it possible to assess whether ProSeal-12 is sufficient, or whether it is better to choose a system for a \u003ca href=\"\/en\/collections\/pokritia-nastilki-avtomobilni-parkingi-i-garzhi\"\u003egarage or car park\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/podovi-pokritia-za-avtoservizi-i-rabotilnitsi\"\u003eauto repair shop\u003c\/a\u003e, or \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective concrete coating\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5 l.","offer_id":49289849176388,"sku":"422871","price":59.0,"currency_code":"EUR","in_stock":true},{"title":"15 l.","offer_id":49289855795524,"sku":"405149","price":137.0,"currency_code":"EUR","in_stock":true},{"title":"200 l.","offer_id":49289855828292,"sku":"405151","price":1482.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_ProSeal-12-Akrilatensastavzaimpregniraneizapechatkanabetonnipovarhnosti.webp?v=1726830817"},{"product_id":"sika-extender-t-sgastitel-za-podovi-sistemi-sikafloor-na-osnovata-na-smoli","title":"Sika® Extender T - Thickener for Sikafloor® Resins","description":"\u003cp\u003e\u003cstrong\u003eSika® Extender T\u003c\/strong\u003e is a fine white fibrous polymer powder used as a thickener for resin-based Sikafloor® flooring systems. It is used to adjust the viscosity of epoxy, polyurethane and PMMA resins when the system requires a thicker consistency or control of sagging.\u003c\/p\u003e\n\n\u003ch2\u003eWhen is Sika Extender T used?\u003c\/h2\u003e\n\u003cp\u003eThe product is used as an additive for Sikafloor® resins in horizontal applications to create a specific texture, on vertical areas to limit sagging, and for sealing cracks and pores. It is a system auxiliary product, not a standalone coating.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAllows viscosity adjustment of various Sikafloor resins.\u003c\/li\u003e\n  \u003cli\u003eEconomical and easy to mix mechanically.\u003c\/li\u003e\n  \u003cli\u003eDoes not affect working time or curing speed according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eOnly a small quantity is needed to change the viscosity of the resin.\u003c\/li\u003e\n  \u003cli\u003eInert, non-reactive and non-carcinogenic according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eThickener for Sikafloor® resin flooring systems\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eForm\u003c\/td\u003e\n      \u003ctd\u003eFine white fibrous polymer powder\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e1 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility\u003c\/td\u003e\n      \u003ctd\u003eSikafloor® epoxy, polyurethane and polymethyl methacrylate resins\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDosage\u003c\/td\u003e\n      \u003ctd\u003eAccording to the TDS of the specific Sikafloor® resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing\u003c\/td\u003e\n      \u003ctd\u003eMechanical mixing only; do not mix by hand\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant during application\u003c\/h2\u003e\n\u003cp\u003eAdding too much Sika® Extender T may affect the gloss finish, adhesion or visibility in some transparent resins. The product must be protected from moisture and stored in dry conditions.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify which Sikafloor® resin you will use, whether the application is horizontal or vertical, and the effect you need - thicker resin, texture, pore filling or sag control. This allows confirmation that Sika® Extender T is the correct additive.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5 kg.","offer_id":49289858974020,"sku":"5457","price":39.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sika_ExtenderT-SgastitelzapodovisistemiSikafloor_naosnovatanasmoli.webp?v=1726831054"},{"product_id":"sikadur-504-spetsialen-kvartsov-pyasak-za-industrialni-podovi-sistemi-0-08-0-2mm","title":"Sikadur®-504 Quartz Sand 0.08-0.2 mm for Flooring Systems","description":"\u003cp\u003e\u003cstrong\u003eSikadur®-504\u003c\/strong\u003e is a specially selected fine quartz sand with a 0.08-0.2 mm grading for industrial flooring systems. It is used as a filler and additive in epoxy and polyurethane flooring solutions where the system requires a controlled grading for self-leveling mixes, leveling or increased mechanical resistance.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikadur 504?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikadur®-504 when the project requires very fine quartz sand for a resin flooring system and the specific Sika system product allows this grading. The 0.08-0.2 mm fraction is suitable for fine mixes where coarser sand would affect the texture, thickness or workability.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFine filler for industrial resin flooring systems.\u003c\/li\u003e\n  \u003cli\u003eAdditive for suitable self-leveling epoxy mixes.\u003c\/li\u003e\n  \u003cli\u003eComponent for leveling and skim coating in flooring systems, where permitted by the resin TDS.\u003c\/li\u003e\n  \u003cli\u003eFine quartz sand for system solutions where a controlled 0.08-0.2 mm grading is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecially selected fine 0.08-0.2 mm grading.\u003c\/li\u003e\n  \u003cli\u003eSuitable for use with resin flooring systems.\u003c\/li\u003e\n  \u003cli\u003eHelps achieve better density and mechanical resistance of the system mix.\u003c\/li\u003e\n  \u003cli\u003ePractical 25 kg format for professional flooring projects.\u003c\/li\u003e\n  \u003cli\u003eSuitable for fine filling where coarser quartz sand is not desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical reference\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eQuartz sand for flooring systems\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGrading\u003c\/td\u003e\n\u003ctd\u003e0.08-0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMain use\u003c\/td\u003e\n\u003ctd\u003eFiller\/additive in suitable resin flooring systems\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem check\u003c\/td\u003e\n\u003ctd\u003eThe ratio and application are determined by the TDS of the specific resin or flooring system\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant system note\u003c\/h2\u003e\n\u003cp\u003eQuartz sand is not a finished floor coating by itself. It functions as a component within a system, so the mixing ratio, thickness, consumption and application method must be taken from the technical data sheet of the resin or complete system being used.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send us the Sika system or resin you will use, the required thickness, the specified grading and the area. If you need a coarser fraction for broadcasting or a rougher texture, send the project grading and system so that a suitable available alternative can be checked.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"25 kg.","offer_id":49289899180356,"sku":"104915","price":9.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikadur_-504-Spetsialenkvartsovpyasakzaindustrialnipodovisistemi0.08-0.2mm.jpg?v=1726831806"},{"product_id":"sikashield-p32-pe-2-5-kg-m-app-modifitsirana-bitumna-hidroizolatsionna-membrana","title":"SikaShield® P32 PE 2.5 kg\/m² - bitumen membrane for base layer","description":"\u003cp\u003e\u003cstrong\u003eSikaShield® P32 PE 2.5 kg\/m²\u003c\/strong\u003e is an APP-modified bitumen waterproofing membrane for flat roofs under a protective layer or ballast and for reinforced concrete slabs. It is used as a base layer in multi-layer systems where torch-applied bitumen roll waterproofing with controlled layer weight is required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaShield P32 PE 2.5 kg\/m²?\u003c\/h2\u003e\n\u003cp\u003eThis product is suitable when you need a bitumen membrane for a roof or slab that will function as the lower\/base layer in a system, rather than as an exposed finishing layer. The upper and lower surfaces are finished with polyethylene film, which supports bonding with the upper layer when correctly torch-applied.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAPP-modified bitumen membrane for roof waterproofing.\u003c\/li\u003e\n  \u003cli\u003eSuitable for flat roofs under a protective layer or ballast.\u003c\/li\u003e\n  \u003cli\u003eUsed as a base layer in multi-layer systems.\u003c\/li\u003e\n  \u003cli\u003eReinforced with glass veil.\u003c\/li\u003e\n  \u003cli\u003eLow-temperature flexibility down to -5 °C according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eFully bonded by torch application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical reference values from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eAPP-modified bitumen membrane\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReinforcement\u003c\/td\u003e\n      \u003ctd\u003eGlass veil\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSurface\u003c\/td\u003e\n      \u003ctd\u003ePolyethylene film on top and bottom\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRoll size\u003c\/td\u003e\n      \u003ctd\u003e1.0 m width × 10.0 m length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMass\u003c\/td\u003e\n      \u003ctd\u003e2.5 kg\/m² ± 0.25 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum tensile force\u003c\/td\u003e\n      \u003ctd\u003e450 N\/50 mm longitudinal; 300 N\/50 mm transverse\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n      \u003ctd\u003e≤ -5 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eResistance to flow\u003c\/td\u003e\n      \u003ctd\u003e≥ 130 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWatertightness\u003c\/td\u003e\n      \u003ctd\u003eWithstands 24 hours at 60 kPa\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +30 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitation: not a UV finish\u003c\/h2\u003e\n\u003cp\u003eSikaShield® P32 PE 2.5 kg\/m² is not suitable as a finishing layer for roofs permanently exposed to UV radiation. If the membrane will remain visible and exposed to sunlight, a mineral-surfaced top membrane such as SikaShield® P34 MG RO 4.5 kg\/m² is more suitable.\u003c\/p\u003e\n\n\u003ch2\u003eSubstrate preparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be uniform, firm, smooth, clean, dry and free from sharp protrusions, oils, grease, bitumen, dust and loose particles. Apply a suitable Sika primer to the prepared dry surface and allow it to dry. For torch application, heat the substrate and the underside film, then press the membrane onto the substrate to achieve good adhesion.\u003c\/p\u003e\n\n\u003ch2\u003eOverlaps and detailing\u003c\/h2\u003e\n\u003cp\u003eAccording to the TDS, a side overlap of at least 100 mm and an end overlap of at least 150 mm must be provided, unless otherwise required by the project or manufacturer. On slopes above 15%, the multi-layer roofing system must be carefully designed and mechanical fastening used where necessary.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, substrate type, slope, whether the membrane will be used as a base or top layer, and the planned protective layer. This helps select the correct SikaShield membrane and calculate a realistic number of rolls including the required overlaps.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"10 m² x 184pcs.","offer_id":49290046374212,"sku":"692717","price":4558.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaShield_P32PE2_5kg_m_-APPmodifitsiranabitumnahidroizolatsionnamembrana.webp?v=1726832973"},{"product_id":"sikashield-p32-pe-4-kg-m-app-modifitsirana-bitumna-hidroizolatsionna-membrana","title":"SikaShield® P32 PE 4 kg\/m² - bitumen membrane for roofs","description":"\u003cp\u003e\u003cstrong\u003eSikaShield® P32 PE 4 kg\/m²\u003c\/strong\u003e is an APP-modified bitumen waterproofing membrane with a mass of 4 kg\/m² and a polyethylene film surface. It is used as a base layer in multi-layer roof waterproofing systems for flat and pitched roofs, balconies and terraces.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaShield P32 PE 4 kg\/m²?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaShield® P32 PE 4 kg\/m² when a torch-applied APP bitumen roll membrane is required as a base layer in a multi-layer system. The TDS specifies that the product is not suitable as a finishing layer for roofs that are permanently exposed to UV effects.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAPP-modified bitumen membrane for roof waterproofing.\u003c\/li\u003e\n  \u003cli\u003eMass of 4 kg\/m² and glass veil reinforcement.\u003c\/li\u003e\n  \u003cli\u003eLow-temperature flexibility down to -5 °C.\u003c\/li\u003e\n  \u003cli\u003eUpper and lower surfaces with polyethylene film.\u003c\/li\u003e\n  \u003cli\u003eEasy torch application.\u003c\/li\u003e\n  \u003cli\u003eCE marking and EN 13707 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eAPP-modified bitumen membrane\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReinforcement\u003c\/td\u003e\n      \u003ctd\u003eGlass veil\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRoll size\u003c\/td\u003e\n      \u003ctd\u003e1.0 m width x 10.0 m length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMass\u003c\/td\u003e\n      \u003ctd\u003e4.0 kg\/m² ± 0.4 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n      \u003ctd\u003e≤ -5 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFlow resistance\u003c\/td\u003e\n      \u003ctd\u003e≥ 130 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRelative humidity\u003c\/td\u003e\n      \u003ctd\u003eMaximum 80%\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication and substrate\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be uniform, sound, smooth, clean, dry and free from sharp protrusions, oils, grease, bitumen, dust and loose particles. Apply a suitable Sika primer to the prepared dry surface, then allow it to dry. For torch application, heat the substrate and the underside film until the film starts to melt, then press the membrane onto the substrate.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNot suitable as a finishing layer under permanent UV exposure.\u003c\/li\u003e\n  \u003cli\u003eAt low temperatures, the membrane becomes less flexible and must be unrolled carefully.\u003c\/li\u003e\n  \u003cli\u003eFor application below +5 °C, heating equipment must be used to ensure the required substrate temperature.\u003c\/li\u003e\n  \u003cli\u003eOn slopes above 15%, multi-layer roofs must be carefully designed and mechanical fastening used where required.\u003c\/li\u003e\n  \u003cli\u003eProvide side laps of at least 100 mm and end laps of at least 150 mm according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, slope, substrate type, whether the membrane will be used as a base or finishing layer, and the full roof build-up. This allows verification that SikaShield® P32 PE 4 kg\/m² is the correct layer in the system and how many rolls are required.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"10 m² - 120pcs","offer_id":49290050535748,"sku":"692666","price":4371.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaShield_P32PE4kg_m_-APPmodifitsiranabitumnahidroizolatsionnamembrana.webp?v=1726833702"},{"product_id":"sikashield-p34-pe-4-kg-m-app-modifitsirana-bitumna-hidroizolatsionna-membrana","title":"SikaShield® P34 PE 4 kg\/m² - bitumen membrane for terraces and roofs","description":"\u003cp\u003e\u003cstrong\u003eSikaShield® P34 PE 4 kg\/m²\u003c\/strong\u003e is an APP-modified bitumen waterproofing membrane with polyester reinforcement for balconies, terraces and roofs under a protective layer or ballast. It is a more robust base layer for multi-layer systems where the waterproofing will be protected with tiles, gravel or another roof\/terrace build-up.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaShield P34 PE 4 kg\/m²?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaShield® P34 PE 4 kg\/m² when you need a bitumen membrane for a terrace, balcony or roof that will be installed under a heavy protective layer. The TDS specifies use on balconies and terraces under tiles or gravel, as well as on flat and sloped roofs under a protective layer or ballast.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAPP-modified bitumen membrane with a weight of 4 kg\/m².\u003c\/li\u003e\n  \u003cli\u003eReinforced with non-woven polyester fabric.\u003c\/li\u003e\n  \u003cli\u003eSuitable for balconies, terraces, flat and sloped roofs under protection.\u003c\/li\u003e\n  \u003cli\u003eUsed as a base layer in multi-layer systems.\u003c\/li\u003e\n  \u003cli\u003eLow-temperature flexibility down to -5 °C.\u003c\/li\u003e\n  \u003cli\u003eGood mechanical performance in tension, tearing and shear according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eAPP-modified bitumen membrane\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReinforcement\u003c\/td\u003e\n      \u003ctd\u003eNon-woven polyester fabric\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSurface\u003c\/td\u003e\n      \u003ctd\u003ePolyethylene film on the top and bottom\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRoll size\u003c\/td\u003e\n      \u003ctd\u003e1.0 m width x 10.0 m length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMass\u003c\/td\u003e\n      \u003ctd\u003e4.0 kg\/m² ± 0.4 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum tensile force\u003c\/td\u003e\n      \u003ctd\u003e480 N\/50 mm longitudinal; 350 N\/50 mm transverse\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eElongation at maximum tensile force\u003c\/td\u003e\n      \u003ctd\u003e35% ± 15% longitudinal and transverse\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLow-temperature flexibility\u003c\/td\u003e\n      \u003ctd\u003e≤ -5 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWatertightness\u003c\/td\u003e\n      \u003ctd\u003eWithstands 24 hours at 60 kPa\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitation: under a protective layer\u003c\/h2\u003e\n\u003cp\u003eSikaShield® P34 PE 4 kg\/m² is not a mineral-finished membrane for permanent UV exposure. If the roof will remain exposed to sunlight, choose a cap sheet with mineral granules. If the system will be under tiles, gravel or another protective layer, P34 PE 4 kg\/m² is the correct type of base layer.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation and substrate\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be uniform, firm, smooth, clean, dry and free from sharp protrusions, oils, grease, bitumen, dust and loose particles. After preparation, apply a suitable Sika primer, allow it to dry, and install the membrane by gas-torch heating of the substrate and the underside film.\u003c\/p\u003e\n\n\u003ch2\u003eOverlaps and design details\u003c\/h2\u003e\n\u003cp\u003eAccording to the TDS, side overlaps must be at least 100 mm and end overlaps at least 150 mm, unless otherwise specified by the manufacturer or the project design. On slopes above 15%, multi-layer roofs must be designed carefully and, where necessary, mechanical fixing should be allowed for.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, substrate type, slope, intended protective layer and whether the product will be part of a terrace, balcony or roof system. This helps select the correct SikaShield layer and calculate the required rolls with the actual overlaps.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"10 m² x 30pcs.","offer_id":49290059088196,"sku":"692724","price":1436.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaShield_P34PE4kg_m_-APPmodifitsiranabitumnahidroizolatsionnamembrana.webp?v=1726833865"},{"product_id":"sikashield-p34-mg-ro-4-5-kg-m-app-modifitsirana-bitumna-hidroizolatsionna-membrana-s-mineralni-granuli","title":"SikaShield® P34 MG RO 4.5 kg\/m² - mineral-surfaced bitumen membrane","description":"\u003cp\u003e\u003cstrong\u003eSikaShield® P34 MG RO 4.5 kg\/m²\u003c\/strong\u003e is an APP-modified bitumen waterproofing membrane with mineral granules for roofs, balconies and terraces. It is used as the top layer in multi-layer systems where the membrane will be exposed to UV and a finished mineral surface is required, rather than a PE membrane installed under protection.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should SikaShield P34 MG RO 4.5 kg\/m² be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose this product when you need a mineral-surfaced bitumen membrane for a roof that can remain as the system’s top layer. According to the TDS, the upper surface is covered with mineral granules, allowing continuous UV exposure, while the lower surface has an easily torch-meltable film for gas-torch installation.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAPP-modified bitumen membrane with a mass of 4.5 kg\/m².\u003c\/li\u003e\n  \u003cli\u003eUpper surface with decorative mineral granules.\u003c\/li\u003e\n  \u003cli\u003eSuitable as a top layer in multi-layer systems.\u003c\/li\u003e\n  \u003cli\u003eAllows continuous UV exposure according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eReinforced with non-woven polyester fabric.\u003c\/li\u003e\n  \u003cli\u003eTiles can be bonded directly onto the membrane according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eAPP-modified bitumen membrane with mineral granules\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReinforcement\u003c\/td\u003e\n      \u003ctd\u003eNon-woven polyester fabric\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUpper surface\u003c\/td\u003e\n      \u003ctd\u003eMineral granules\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLower surface\u003c\/td\u003e\n      \u003ctd\u003ePolyethylene film for gas-torch installation\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRoll size\u003c\/td\u003e\n      \u003ctd\u003e1.0 m width x 10.0 m length\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMass\u003c\/td\u003e\n      \u003ctd\u003e4.5 kg\/m² ± 0.45 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum tensile force\u003c\/td\u003e\n      \u003ctd\u003e480 N\/50 mm longitudinal; 350 N\/50 mm transverse\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eElongation at maximum tensile force\u003c\/td\u003e\n      \u003ctd\u003e35% ± 15% longitudinal and transverse\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFlexibility at low temperature\u003c\/td\u003e\n      \u003ctd\u003e≤ -5 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWatertightness\u003c\/td\u003e\n      \u003ctd\u003eWithstands 24 hours at 60 kPa\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDifference from PE membranes\u003c\/h2\u003e\n\u003cp\u003eSikaShield® P34 MG RO 4.5 kg\/m² is a mineral-surfaced top membrane. SikaShield® P32 PE 2.5 kg\/m² and SikaShield® P34 PE 4 kg\/m² are PE membranes for a base layer under a protective layer or ballast and must not be used as a finished UV-exposed layer. This helps avoid selecting a base-layer roll waterproofing membrane where a visible mineral roof finish is required.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation and substrate\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be homogeneous, firm, smooth, clean, dry and free from sharp protrusions, oils, grease, bitumen, dust and loose particles. A suitable Sika primer is applied to the prepared dry surface and allowed to dry, then the membrane is installed by gas-torch heating of the substrate and the lower film.\u003c\/p\u003e\n\n\u003ch2\u003eOverlaps and maintenance\u003c\/h2\u003e\n\u003cp\u003eAccording to the TDS, a side lap of at least 100 mm and an end lap of at least 150 mm must be provided, unless otherwise specified by the project or the manufacturer. To maintain the waterproofing function, it is recommended to periodically inspect details, flashings, drains, overflows and all exposed parts of the membrane.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, slope, substrate type, whether the membrane will be a visible top layer, and what details are present on the roof or terrace. This makes it possible to confirm whether SikaShield® P34 MG RO 4.5 kg\/m² is the correct finish layer and how many rolls are required, including overlaps.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"10 m² x 27pcs.","offer_id":49290068754756,"sku":"692659","price":1354.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaShield_P34MGRO4_5kg_m_-APPmodifitsiranabitumnahidroizolatsionnamembranasmineralnigranuli.webp?v=1726834047"},{"product_id":"sika-igolflex-p-01-grund","title":"Sika® Igolflex® P-01 DE - Bituminous Primer for Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSika® Igolflex® P-01 DE\u003c\/strong\u003e is a ready-to-use \u003cstrong\u003ewater-based bituminous primer\u003c\/strong\u003e designed for substrate preparation before thick-layer bituminous coatings and bituminous sheet membranes. It is used to improve adhesion and consolidate the substrate in Igolflex and other bituminous waterproofing systems.\u003c\/p\u003e\n\n\u003ch2\u003eWhere is Sika® Igolflex® P-01 DE used?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn concrete\u003c\/strong\u003e - before polymer-bitumen coatings and bituminous membranes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn mortars and masonry\u003c\/strong\u003e - when the substrate needs to be prepared and made uniform before waterproofing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn wood\u003c\/strong\u003e - where the system and technical detail allow such use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAs a system primer\u003c\/strong\u003e - before \u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101 DE\u003c\/a\u003e and other suitable bituminous coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cp\u003eAccording to the technical data sheet, the product can be applied by brush, roller or airless spray, has good adhesion to dry and slightly damp substrates, is easy to work with and provides good coverage. As a primer, it helps prepare the substrate for the next bituminous layer, but it does not replace the waterproofing membrane itself.\u003c\/p\u003e\n\n\u003ch2\u003eConsumption and conditions\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProperty\u003c\/th\u003e\n      \u003cth\u003eValue according to the TDS\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApproximate consumption as a primer\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.050 L\/m²; actual consumption depends on the porosity and profile of the substrate.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +30 °C.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate condition\u003c\/td\u003e\n      \u003ctd\u003eDry or slightly damp, homogeneous, free from dust, oils, weak particles and contamination.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e5 L or 10 L plastic pails.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use in contact with drinking water.\u003c\/li\u003e\n  \u003cli\u003eDo not use as an exposed coating under constant weathering and UV light.\u003c\/li\u003e\n  \u003cli\u003eDo not use under water pressure or permanent immersion in water.\u003c\/li\u003e\n  \u003cli\u003eBefore full application, create a test area if the substrate is highly porous or uncertain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor system selection, see \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eSika waterproofing\u003c\/a\u003e and \u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101 DE\u003c\/a\u003e. If you send the substrate type, area in square metres and photos, the approximate consumption can be calculated and it can be checked whether this primer is the correct choice for the system.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-igolflexp01\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated bituminous waterproofing systems\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Igolflex P-01 DE is a primer, not a final waterproofing layer. It is used to prepare the substrate before compatible bituminous coatings and membranes, and it is not a solution for permanent UV exposure, water pressure or immersion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor bituminous roofing solutions, see \u003ca href=\"\/en\/collections\/rulonni-bitumni-hidroizolatsii-za-pokrivi\"\u003ebituminous sheet waterproofing membranes\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a thick-layer bituminous coating, compare with \u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a general selection by application, see \u003ca href=\"\/en\/collections\/hidroizolacia-produkti-sika\"\u003eSika waterproofing products\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"5 l","offer_id":55621754585412,"sku":"810226","price":32.4,"currency_code":"EUR","in_stock":true},{"title":"10 l.","offer_id":49291124441412,"sku":"810271","price":56.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SIKA_IGOLFLEX_P-01_DE.webp?v=1757655203"},{"product_id":"sika-igolflex-p-10-1-komponenten-bitumen-grund-na-osnovata-na-raztvoritel","title":"Sika® Igolflex® P-10 - Solvent-Based Bitumen Primer","description":"\u003cp\u003e\u003cstrong\u003eSika® Igolflex® P-10\u003c\/strong\u003e is a 1-component solvent-based bitumen primer for improving the adhesion of thick-layer bituminous coatings and bitumen membranes. It is used on concrete, mortar, masonry, wood and metal when the substrate needs to be consolidated and prepared for a bituminous system.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika Igolflex P-10?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Igolflex® P-10 when you need a \u003cstrong\u003esolvent-based bitumen primer\u003c\/strong\u003e for roof, foundation or below-ground bituminous waterproofing systems. It is suitable for porous substrates and can be applied on slightly damp substrates, but not on wet or very damp surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use 1-component bitumen primer.\u003c\/li\u003e\n  \u003cli\u003eShort drying time.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion and good penetration into porous substrates.\u003c\/li\u003e\n  \u003cli\u003eApplication by brush, roller or airless spray.\u003c\/li\u003e\n  \u003cli\u003eCan be applied on slightly damp substrates.\u003c\/li\u003e\n  \u003cli\u003eImproves adhesion to concrete, mortar, masonry, wood and metal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eSolvent-based bitumen primer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eComposition\u003c\/td\u003e\n      \u003ctd\u003eBitumen and solvent\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging according to TDS\u003c\/td\u003e\n      \u003ctd\u003e5, 10, 20 and 200 l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eBlack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003e0.95 ± 0.05 kg\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption on concrete, mortar and wood\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.35-0.50 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption on metal\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.20-0.30 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDrying time\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2 hours at +23 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use in residential rooms or unventilated environments.\u003c\/li\u003e\n  \u003cli\u003eDo not apply on wet or very damp surfaces.\u003c\/li\u003e\n  \u003cli\u003eDo not mix with cement or water.\u003c\/li\u003e\n  \u003cli\u003eDo not use for waterproofing tanks, basements or channels exposed to water pressure.\u003c\/li\u003e\n  \u003cli\u003eDo not use on surfaces or tanks in contact with liquids for human consumption, including drinking water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send details of the substrate, area, whether it is dry or slightly damp, and which bitumen membrane or coating will be applied after the primer. This allows the actual consumption to be calculated and helps confirm whether P-10 is the correct primer.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"20 l.","offer_id":49291184472388,"sku":"600656","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaIgolflexP-10-1-komponentenbitumengrundnaosnovatanaraztvoritel.webp?v=1726848839"},{"product_id":"sika-igasol-bc-bitum-kauchukovo-pokritie-s-visoka-adhezia","title":"Sika® Igasol® BC - Bitumen-Rubber Protective Coating","description":"\u003cp\u003e\u003cstrong\u003eSika® Igasol® BC\u003c\/strong\u003e is a 1-component, water-based bitumen-rubber emulsion. After drying, it forms a strong, seamless and flexible coating for concrete structures, floor slabs, underground structures, foundations and retaining walls.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika Igasol BC?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Igasol® BC when an economical protective bitumen-rubber coating is required on concrete structures and underground elements. The product is suitable as a sandwich-type protective membrane in floor systems, for new construction or for surface treatment.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component, water-based bitumen-rubber emulsion.\u003c\/li\u003e\n  \u003cli\u003eExcellent adhesion to damp substrates.\u003c\/li\u003e\n  \u003cli\u003eSeamless coating without joints.\u003c\/li\u003e\n  \u003cli\u003eCan be applied on vertical and horizontal surfaces.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to aggressive salts and contaminated groundwater.\u003c\/li\u003e\n  \u003cli\u003eLow odor and drying without strong vapors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eBitumen-rubber based coating\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e15 L metal pail\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColor\u003c\/td\u003e\n      \u003ctd\u003eDark brown liquid, black after drying\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.00 kg\/L at +25 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.25-0.50 kg\/m² per coat, applied in 2-3 coats\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNext coat\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 5 hours at +35 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull curing\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 3 days\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be uniform, dry and free from dust, oils, grease and loose particles. On warm and very dry porous concrete surfaces, the TDS allows priming by diluting Sika® Igasol® BC with clean water at a 1:1 ratio by weight. Two coats are recommended to avoid missed areas in the coating.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not apply to exterior areas in very high humidity or when rain is expected.\u003c\/li\u003e\n  \u003cli\u003eProtect freshly applied material from rain until fully cured.\u003c\/li\u003e\n  \u003cli\u003eHoles, cavities, cracks and other substrate defects must be filled with a suitable Sika mortar before application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, substrate type, whether it is an underground structure, foundation, slab or retaining wall, and whether there are cracks or groundwater moisture. This determines the preparation, number of coats and consumption.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"15 l.","offer_id":49291298242884,"sku":"429121","price":35.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaIgasolBC-Bitum-kauchukovopokritiesvisokaadhezia.png?v=1726849673"},{"product_id":"sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum","title":"Sika® Igolflex®-101 DE - polymer-bitumen waterproofing for foundations","description":"\u003cp\u003e\u003cstrong\u003eSika® Igolflex®-101 DE\u003c\/strong\u003e is a 1-component, ready-to-use \u003cstrong\u003epolymer-bitumen waterproofing\u003c\/strong\u003e product for thick-layer application. It is used as a waterproofing membrane on concrete and masonry, most often for reinforced concrete slabs, underground parts of buildings, basement walls and porous mineral substrates.\u003c\/p\u003e\n\n\u003cp\u003eThe product is elastic, does not sag on vertical surfaces and has good crack-bridging ability. It is suitable where bituminous waterproofing is required for foundations and structures, but it is not the right choice for surfaces that will be directly exposed to vehicle or pedestrian traffic.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika® Igolflex®-101 DE?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor waterproofing foundations and basement walls\u003c\/strong\u003e - on concrete or masonry with a porous surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor reinforced concrete slabs and podiums\u003c\/strong\u003e - when the system requires a thick-layer bituminous membrane.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor vertical surfaces\u003c\/strong\u003e - when it is important that the coating does not sag during application.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor substrates with small cracks\u003c\/strong\u003e - when crack-bridging ability is required within the system application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSystem selection\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSystem element\u003c\/th\u003e\n      \u003cth\u003eProduct\u003c\/th\u003e\n      \u003cth\u003eWhen it is used\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimer\u003c\/td\u003e\n      \u003ctd\u003e\u003ca href=\"\/en\/products\/sika-igolflex-p-01-grund\"\u003eSika® Igolflex® P-01 DE\u003c\/a\u003e\u003c\/td\u003e\n      \u003ctd\u003eFor improving adhesion on concrete, mortar, masonry or wood before bituminous coatings.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMain waterproofing\u003c\/td\u003e\n      \u003ctd\u003eSika® Igolflex®-101 DE\u003c\/td\u003e\n      \u003ctd\u003eAs a thick-layer polymer-bitumen membrane for slabs, podiums and basement walls.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDetail reinforcement\u003c\/td\u003e\n      \u003ctd\u003e\u003ca href=\"\/en\/products\/sika%C2%AE-igolflex%C2%AE-f-05-poliesterna-takan-za-armirane-na-pokritia\"\u003eSika® Igolflex® F-05\u003c\/a\u003e\u003c\/td\u003e\n      \u003ctd\u003eFor details, corners, junctions and areas where the system requires reinforcement.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use in contact with drinking water.\u003c\/li\u003e\n  \u003cli\u003eDo not use as a direct finish for vehicle or pedestrian traffic.\u003c\/li\u003e\n  \u003cli\u003eFor exposed UV-exposed surfaces, check whether a protective system or another product is required.\u003c\/li\u003e\n  \u003cli\u003eThe substrate must be sound, clean and prepared according to the Sika technical data sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eBefore application, the substrate must be cleaned of dust, oils, loose material and weak existing coatings. On highly absorbent or uneven substrates, the system primer is especially important. For details around corners, junctions and penetrations, assess whether reinforcing fabric is required.\u003c\/p\u003e\n\n\u003ch2\u003ePackaging and ordering\u003c\/h2\u003e\n\u003cp\u003eSika® Igolflex®-101 DE is available in a \u003cstrong\u003e28 L\u003c\/strong\u003e pack. For the correct product selection, send photos, the area in square metres, a description of the substrate and whether the area is a foundation, basement wall, slab or detail. If you are looking for a broader system selection, see \u003ca href=\"\/en\/collections\/hidroizolatsia-za-osnovi-i-saorazhenia\"\u003ewaterproofing for foundations and structures\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/techni-hidroizolatsionni-membrani\"\u003eliquid waterproofing membranes\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eSika waterproofing products\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-igolflex101\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated systems for Sika® Igolflex®-101 DE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e Igolflex-101 is the final thick-layer bituminous coating, but the system result depends on substrate preparation, the correct primer and reinforcement of critical details. This is especially important for foundations, basement walls, slabs and concrete-to-masonry junctions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor priming before the bituminous system, use \u003ca href=\"\/en\/products\/sika-igolflex-p-01-grund\"\u003eSika® Igolflex® P-01 DE\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor reinforcing cracks, edges and critical details, see \u003ca href=\"\/en\/products\/sika%C2%AE-igolflex%C2%AE-f-05-poliesterna-takan-za-armirane-na-pokritia\"\u003eSika® Igolflex® F-05\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eTo choose by application, see \u003ca href=\"\/en\/collections\/hidroizolatsia-za-osnovi-i-saorazhenia\"\u003ewaterproofing for foundations and structures\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"32 l.","offer_id":49291336417604,"sku":"797496","price":116.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaIgolflex-101-Debelosloynopokritienabazapolimer-modifitsiranbitum.webp?v=1726849926"},{"product_id":"sikalastic-685-elastomerna-uv-ustoychiva-techna-bitumna-membrana-na-vodna-osnova","title":"Sikalastic®-685 - UV-Resistant Liquid Waterproofing for Roofs and Terraces","description":"\u003cp\u003e\u003cstrong\u003eSikalastic®-685\u003c\/strong\u003e is a 1-component, water-based, elastomeric liquid bitumen membrane for UV-resistant waterproofing of roofs, terraces, balconies, gutters, parapet walls, flashings, overlaps in bituminous roll membranes and joints.\u003c\/p\u003e\n\n\u003ch2\u003eWhere is Sikalastic 685 used?\u003c\/h2\u003e\n\u003cp\u003eThe product is suitable for flat and sloped exposed roof structures, external balconies and terraces, gutters, channels, tanks, parapet walls, flashings and sealing overlaps in bituminous membranes. It can be applied by brush, roller, airless spray or trowel, depending on the detail and site conditions.\u003c\/p\u003e\n\n\u003ch2\u003eSuitable substrates\u003c\/h2\u003e\n\u003cp\u003eSikalastic®-685 can be used on brick masonry, cement screeds, concrete, ferrous metals, glazed and unglazed ceramic tiles, uncoated gypsum, uncoated plasterboard, polystyrene and wood. The substrate must be sound, clean and prepared in accordance with the technical data sheet.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages according to the technical data\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGood UV resistance.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to many types of substrates.\u003c\/li\u003e\n  \u003cli\u003eGood crack-bridging ability.\u003c\/li\u003e\n  \u003cli\u003eSeamless coating with full adhesion to the substrate.\u003c\/li\u003e\n  \u003cli\u003e1-component product, ready to use.\u003c\/li\u003e\n  \u003cli\u003eAdhesive class for bonding ceramic tiles: C2S1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eSikalastic®-685 is not suitable for permanent immersion in water and is not suitable for contact with potable water. If you are looking for waterproofing for a tank with standing water, potable water or a specific chemical environment, another system must be selected.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eFor a more accurate price and consumption estimate, send the area, substrate type, whether the roof or terrace is flat or sloped, and whether there is an existing bituminous membrane, joints, cracks, drains, gutters or details around upstands. This helps determine whether Sikalastic®-685 is the right solution or whether another waterproofing system is required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-sikalastic685\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated systems for Sikalastic®-685\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikalastic-685 is a strong choice for a UV-resistant seamless coating on roof and terrace details. For active cracks, joints, upstands and overlaps, the system must be considered with proper preparation, reinforcement and compatible products.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor a complete choice of roof system, see \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a polyurethane liquid membrane, compare with \u003ca href=\"\/en\/products\/sikalastic-612-ednokomponentna-poliuretanova-hidroizolatsionna-membrana\"\u003eSikalastic®-612\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor reinforcing critical details, see \u003ca href=\"\/en\/products\/sikalastic-fleece-120-poliesterna-takan-za-armirane-na-techni-hidroizolatsionni-membrani\"\u003eSikalastic® Fleece-120\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"5 kg. \/ Gray","offer_id":49291372691780,"sku":"673093","price":25.92,"currency_code":"EUR","in_stock":true},{"title":"20 kg. \/ Gray","offer_id":49291475353924,"sku":"633640","price":86.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikalastic-685-ElastomernaUV-ustoychivatechnabitumnamembrananavodnaosnova.webp?v=1726850160"},{"product_id":"sikalastic-612-ednokomponentna-poliuretanova-hidroizolatsionna-membrana","title":"Sikalastic®-612 - Polyurethane Liquid Roof Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikalastic®-612\u003c\/strong\u003e is a 1-component, cold-applied polyurethane liquid membrane for \u003cstrong\u003ewaterproofing roofs, balconies and terraces\u003c\/strong\u003e. According to the technical data sheet, it forms seamless and durable waterproofing for exposed roofs and structures, as well as waterproofing under tiles on balconies and terraces.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikalastic®-612?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor new or remedial roof waterproofing\u003c\/strong\u003e - when a liquid-applied system is required without heating and without an open flame.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor complex roof details\u003c\/strong\u003e - upstands, drains, flashings, corners, joints, seams and hard-to-reach areas.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor balconies and terraces under tiles\u003c\/strong\u003e - when the system must function as a waterproofing layer under bonded ceramic tiles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhen a reinforced system is required\u003c\/strong\u003e - where there is movement, cracking, unevenness or critical detailing, using \u003ca href=\"\/en\/products\/sikalastic-fleece-120-poliesterna-takan-za-armirane-na-techni-hidroizolatsionni-membrani\"\u003eSikalastic® Fleece-120\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cp\u003eThe product is ready to use, requires no mixing, is cold-applied and forms a seamless membrane. The technical data sheet states water vapour permeability, elasticity at low temperatures, good adhesion to many substrates and fast curing, with the coating becoming rain resistant almost immediately after application under suitable conditions.\u003c\/p\u003e\n\n\u003ch2\u003eConsumption and system build-up\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSystem\u003c\/th\u003e\n      \u003cth\u003eIndicative build-up according to the TDS\u003c\/th\u003e\n      \u003cth\u003eWhen it is used\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRoof coating\u003c\/td\u003e\n      \u003ctd\u003e1 or 2 coats, total consumption approximately 0.7-2.0 L\/m² depending on the system.\u003c\/td\u003e\n      \u003ctd\u003eExposed roofs and repair areas, depending on the condition of the substrate.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReinforced roof system\u003c\/td\u003e\n      \u003ctd\u003eBase coat of Sikalastic®-612, Sikalastic® Fleece-120 and sealing coat.\u003c\/td\u003e\n      \u003ctd\u003eDetails, cracks, seams, uneven substrates and areas subject to movement.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUnder tiles\u003c\/td\u003e\n      \u003ctd\u003eSystem on concrete or cement screed, with a compatible primer and broadcast sand according to the TDS.\u003c\/td\u003e\n      \u003ctd\u003eBalconies and terraces where tiles will be bonded.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSikalastic®-612 is not suitable for permanent contact with water.\u003c\/li\u003e\n  \u003cli\u003eIt is not a product for internal applications.\u003c\/li\u003e\n  \u003cli\u003eIt must not be diluted with solvents.\u003c\/li\u003e\n  \u003cli\u003eFor bituminous substrates and areas subject to movement, check whether a fully reinforced system is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor system selection, see \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/podovi-pokritia-balkoni-terasi\"\u003ewaterproofing for balconies and terraces\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eSika waterproofing\u003c\/a\u003e. If you send photos, the area, substrate type and details, it can be calculated more accurately whether an unreinforced system is sufficient or reinforcement with Fleece-120 is required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-sikalastic612\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated systems for Sikalastic®-612\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikalastic-612 is a liquid polyurethane membrane, but the quality of the roof comes from the system: substrate, primer, correct consumption, reinforcement of details and a compatible finish or tiles on terraces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor roof systems and selection by substrate, see \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor reinforcing joints, corners and critical areas, add \u003ca href=\"\/en\/products\/sikalastic-fleece-120-poliesterna-takan-za-armirane-na-techni-hidroizolatsionni-membrani\"\u003eSikalastic® Fleece-120\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a UV-resistant liquid bituminous alternative, compare with \u003ca href=\"\/en\/products\/sikalastic-685-elastomerna-uv-ustoychiva-techna-bitumna-membrana-na-vodna-osnova\"\u003eSikalastic®-685\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"5 l.\/7.1 kg. \/ White","offer_id":49296110649668,"sku":"428093","price":81.0,"currency_code":"EUR","in_stock":true},{"title":"15 l.\/ 21.3 kg. \/ White","offer_id":49296133685572,"sku":"428092","price":199.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikalastic_-612-Ednokomponentnapoliuretanovahidroizolatsionnamembrana.webp?v=1726894711"},{"product_id":"sika®-igolflex®-f-05-poliesterna-takan-za-armirane-na-pokritia","title":"Sika® Igolflex® F-05 - Polyester Reinforcement Fabric for Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSika® Igolflex® F-05\u003c\/strong\u003e is a non-woven polyester fabric for reinforcing Sika® Igolflex® and Sikalastic® bituminous waterproofing coatings. It is used to strengthen the coating over cracked concrete, cementitious substrates, edges, junctions, drains and corners.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika® Igolflex® F-05?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Igolflex® F-05 when the waterproofing coating must be reinforced in critical areas: cracks, junctions, internal and external corners, drains and transitions. It is a system reinforcement embedded into a freshly applied coating, not a stand-alone waterproofing layer.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh tensile strength.\u003c\/li\u003e\n  \u003cli\u003eReinforces the waterproofing coating.\u003c\/li\u003e\n  \u003cli\u003eImproves the dimensional stability of the coating.\u003c\/li\u003e\n  \u003cli\u003eResistant to bitumen and alkalis.\u003c\/li\u003e\n  \u003cli\u003eEasy to embed into a freshly applied coating.\u003c\/li\u003e\n  \u003cli\u003eSuitable for Sika® Igolflex® and Sikalastic® systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eNon-woven polyester reinforcement fabric\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRolls according to TDS\u003c\/td\u003e\n      \u003ctd\u003e1.00 × 50 m and 0.14 × 50 m\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMass per unit area\u003c\/td\u003e\n      \u003ctd\u003eApprox. 110 g\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStorage\u003c\/td\u003e\n      \u003ctd\u003e36 months when stored correctly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible systems\u003c\/td\u003e\n      \u003ctd\u003eSika® Igolflex® and Sikalastic® waterproofing coatings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOverlap\u003c\/td\u003e\n      \u003ctd\u003eMinimum 100 mm between sheets\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHow it is embedded\u003c\/h2\u003e\n\u003cp\u003eSika® Igolflex® F-05 is fully embedded into the first layer of Sika® Igolflex® or Sikalastic®. The sheets are overlapped by at least 100 mm, after which a second layer of the relevant coating is applied after the waiting time stated in the coating TDS.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe fabric is not a stand-alone waterproofing layer.\u003c\/li\u003e\n  \u003cli\u003eAlways check the TDS of the specific Sika® Igolflex® or Sikalastic® coating into which it will be embedded.\u003c\/li\u003e\n  \u003cli\u003eFor temporary flowing water under low pressure, the entire system must be checked, not only the reinforcement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify which Sika® Igolflex® or Sikalastic® system you will use, the area, details and zones requiring reinforcement. This allows the required quantity of fabric and the overlaps to be calculated.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-igolflexf05\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated systems for Sika® Igolflex® F-05\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e F-05 is not a stand-alone waterproofing layer. It is a reinforcing layer embedded into a freshly applied compatible coating to strengthen critical areas such as cracks, corners, edges, drains and transitions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor a bituminous system for foundations, combine with \u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101 DE\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a UV-resistant liquid bituminous membrane, compare with \u003ca href=\"\/en\/products\/sikalastic-685-elastomerna-uv-ustoychiva-techna-bitumna-membrana-na-vodna-osnova\"\u003eSikalastic®-685\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor roofing solutions, see \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"1x50m - 50 m²","offer_id":49296146956612,"sku":"605166","price":137.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sika_Igolflex_F-05-Poliesternatakanzaarmiranenapokritia.jpg?v=1726895169"},{"product_id":"sikalastic-fleece-120-poliesterna-takan-za-armirane-na-techni-hidroizolatsionni-membrani","title":"Sikalastic® Fleece-120 - reinforcement fleece for liquid waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikalastic® Fleece-120\u003c\/strong\u003e is a polyester reinforcement fleece for \u003cstrong\u003eliquid Sikalastic waterproofing membranes\u003c\/strong\u003e. It is not a standalone waterproofing product, but a system component embedded into the freshly applied membrane to support the correct base coat thickness, crack-bridging and the mechanical resistance of the system.\u003c\/p\u003e\n\n\u003cp\u003eIt is used in new construction and roof refurbishment, especially at details, complex geometry, areas with restricted access, junctions, corners and areas where the liquid waterproofing must be reinforced. It is most commonly combined with Sikalastic roof systems and liquid waterproofing membranes.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you use Sikalastic® Fleece-120?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn roofs with many details\u003c\/strong\u003e - around upstands, penetrations, corners, drainage areas and junctions between different substrates.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor complex geometry\u003c\/strong\u003e - where a standard sheet membrane is difficult to install or access is restricted.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor reinforcing a liquid membrane\u003c\/strong\u003e - when the system requires polyester reinforcement for improved crack-bridging.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor repair works\u003c\/strong\u003e - where an area at risk of movement, cracking or mechanical stress needs to be strengthened.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow does it work in the system?\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eStep\u003c\/th\u003e\n      \u003cth\u003eWhat is done\u003c\/th\u003e\n      \u003cth\u003eWhy it matters\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e1. Preparation\u003c\/td\u003e\n      \u003ctd\u003eThe substrate is cleaned and, if required by the system, primed with a suitable primer.\u003c\/td\u003e\n      \u003ctd\u003eThe reinforcement does not compensate for a weak, dusty or unprepared substrate.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e2. First coat\u003c\/td\u003e\n      \u003ctd\u003eThe first coat of the liquid Sikalastic membrane is applied.\u003c\/td\u003e\n      \u003ctd\u003eFleece-120 must be embedded while the material is still wet.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e3. Embedding\u003c\/td\u003e\n      \u003ctd\u003eThe fleece is laid without wrinkles or air bubbles, with sufficient overlap between strips.\u003c\/td\u003e\n      \u003ctd\u003eCorrect embedding is essential for the strength and continuity of the system.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e4. Second coat\u003c\/td\u003e\n      \u003ctd\u003eAfter drying to a suitable condition, the next coat of the membrane is applied.\u003c\/td\u003e\n      \u003ctd\u003eThis keeps the reinforcement as part of a completed waterproofing system.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatible systems and related products\u003c\/h2\u003e\n\u003cp\u003eSikalastic® Fleece-120 is selected together with a suitable liquid membrane, not separately from the system. See \u003ca href=\"\/en\/products\/sikalastic-612-ednokomponentna-poliuretanova-hidroizolatsionna-membrana\"\u003eSikalastic®-612\u003c\/a\u003e, \u003ca href=\"\/en\/products\/sikalastic-685-elastomerna-uv-ustoychiva-techna-bitumna-membrana-na-vodna-osnova\"\u003eSikalastic®-685\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/techni-hidroizolatsionni-membrani\"\u003eliquid waterproofing membranes\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use Fleece-120 as a standalone waterproofing product.\u003c\/li\u003e\n  \u003cli\u003eDo not apply over an unprepared, dusty, wet or unstable substrate.\u003c\/li\u003e\n  \u003cli\u003eFollow the product data sheet of the specific Sikalastic membrane for consumption, waiting time and compatible primer.\u003c\/li\u003e\n  \u003cli\u003eFor details, start by treating the details before the large horizontal areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackaging\u003c\/h2\u003e\n\u003cp\u003eThe product is supplied as a roll \u003cstrong\u003e1 x 50 m - 50 m²\u003c\/strong\u003e. For the correct selection, send dimensions, photos of the details and information on which Sikalastic membrane will be used. This makes it possible to assess whether full reinforcement is required or only reinforcement of details and risk areas.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"1x50m - 50 m²","offer_id":49296171467076,"sku":"97480","price":137.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikalastic_Fleece-120-Poliesternatakanzaarmiranenatechnihidroizolatsionnimembrani.webp?v=1726895518"},{"product_id":"sika-primer-490-t-grund-za-gladki-i-glazirani-povarhnosti","title":"Sika® Primer-490 T - primer for Sikalastic®-490 T","description":"\u003cp\u003e\u003cstrong\u003eSika® Primer-490 T\u003c\/strong\u003e is a transparent 1-component solvent-based primer for improving the adhesion of \u003ca href=\"\/en\/products\/sikalastic-490-t-prozrachna-ednokomponentna-techna-poliuretanova-hidroizolatsionna-membrana\"\u003eSikalastic®-490 T\u003c\/a\u003e to glass and glazed surfaces. It is a system primer, not a universal primer for every substrate.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sika Primer 490 T be selected?\u003c\/h2\u003e\n\u003cp\u003eUse Sika® Primer-490 T when the transparent polyurethane coating Sikalastic®-490 T is to be applied over glazed ceramic, glass or glass blocks. The primer activates and degreases the surface and improves the adhesion of the final transparent coating.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTransparent 1-component primer.\u003c\/li\u003e\n  \u003cli\u003eSystem product for Sikalastic®-490 T.\u003c\/li\u003e\n  \u003cli\u003eSuitable for glass, glass blocks and glazed ceramic.\u003c\/li\u003e\n  \u003cli\u003eEasy application by rubbing in with a clean, dry cloth.\u003c\/li\u003e\n  \u003cli\u003eCures with moisture from the air.\u003c\/li\u003e\n  \u003cli\u003eAllows application of Sikalastic®-490 T after 1–2 hours under suitable conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eTransparent 1-component solvent-based primer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eChemical base\u003c\/td\u003e\n      \u003ctd\u003eSilane dissolved in isopropanol\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e1 kg disposable metal can\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003e0.80 g\/ml\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.03–0.08 kg\/m² in one or two coats, depending on the substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n      \u003ctd\u003e≤ 4% by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNext coat\u003c\/td\u003e\n      \u003ctd\u003eSikalastic®-490 T after 1–2 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe surface must be sound, clean, dry and free from detergents, oils, grease, salts, silicone, siloxanes and other chemicals that may impair adhesion. Sika® Primer-490 T is applied with a soaked clean, dry cloth by rubbing it over the entire surface. Avoid puddles of material and replace cloths frequently.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe primer is intended for system use with Sikalastic®-490 T.\u003c\/li\u003e\n  \u003cli\u003eThe maximum substrate moisture must be up to 4% by weight.\u003c\/li\u003e\n  \u003cli\u003eThe temperature must be at least +3 °C above the dew point to reduce the risk of condensation and blistering.\u003c\/li\u003e\n  \u003cli\u003eThe optimum relative air humidity according to the TDS is 50–70%; high humidity may affect the final coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the type of flooring or substrate, area, photos and whether \u003ca href=\"\/en\/products\/sikalastic-490-t-prozrachna-ednokomponentna-techna-poliuretanova-hidroizolatsionna-membrana\"\u003eSikalastic®-490 T\u003c\/a\u003e will be applied. If the substrate is not glass or glazed, different preparation or another system may be required.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"Default Title","offer_id":54083515941188,"sku":"158804","price":24.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sika-primer-490t-grund-za-gladki-powyrhnosti.webp?v=1736951903"},{"product_id":"sikatop-seal-107-elastik-elastichna-tsimentova-hidroizolatsia","title":"SikaTop® Seal-107 Elastik - Elastic Cementitious Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikaTop® Seal-107 Elastik\u003c\/strong\u003e is a 2-component elastic cement-polymer waterproofing mortar for concrete, cement renders and masonry. It is suitable for bathrooms, shower cabins, balconies, terraces, swimming pools, foundation walls, basements and other areas where a durable mineral waterproofing layer is required before installing tiles or rigid protection.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaTop Seal-107 Elastik?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaTop® Seal-107 Elastik when you need an elastic cementitious waterproofing system that can be used both indoors and outdoors. Unlike ready-to-use liquid membranes intended only for interior wet rooms, this product is also suitable for concrete surfaces, foundation walls, balconies, terraces and swimming pools before bonding ceramic tiles.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2-component polymer-modified cementitious mortar.\u003c\/li\u003e\n  \u003cli\u003eElastic waterproofing for horizontal and vertical surfaces.\u003c\/li\u003e\n  \u003cli\u003eSuitable for bathrooms, shower cabins, balconies, terraces, swimming pools and foundation walls.\u003c\/li\u003e\n  \u003cli\u003eNo water is added during mixing.\u003c\/li\u003e\n  \u003cli\u003eCan be applied by brush, fine trowelling or machine application.\u003c\/li\u003e\n  \u003cli\u003eProtects concrete against water penetration and carbonation.\u003c\/li\u003e\n  \u003cli\u003eApproved for contact with drinking water according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eElastic 2-component cement-polymer waterproofing mortar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e30 kg set: component A 10 kg + component B 20 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing as slurry\u003c\/td\u003e\n      \u003ctd\u003eA : B = 1 : 2 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing as trowel-applied mortar\u003c\/td\u003e\n      \u003ctd\u003eA : B = 1 : 2.5 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApproximate consumption\u003c\/td\u003e\n      \u003ctd\u003e~1.7 kg\/m²\/mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer thickness\u003c\/td\u003e\n      \u003ctd\u003e0.75 mm minimum; 1.50 mm maximum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTotal thickness for waterproofing\u003c\/td\u003e\n      \u003ctd\u003e1.5 to 2.0 mm in a minimum of 2 layers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +8 °C to +30 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time between layers\u003c\/td\u003e\n      \u003ctd\u003e~12 h at +10 °C; ~6 h at +20 °C; ~3 h at +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, clean and free from dust, loose particles, oils, grease, cement laitance and other contaminants. The tensile adhesion strength of the concrete must be greater than 1 N\/mm². The surface is pre-wetted to saturation before application, and the product is mechanically mixed with an electric mixer to obtain a homogeneous, lump-free mix.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not add water under any circumstances.\u003c\/li\u003e\n  \u003cli\u003eDo not exceed the maximum layer thickness.\u003c\/li\u003e\n  \u003cli\u003eFor waterproofing, always apply a minimum of 2 layers.\u003c\/li\u003e\n  \u003cli\u003eFreshly applied material must be protected from frost and rain.\u003c\/li\u003e\n  \u003cli\u003eNot a final decorative coating.\u003c\/li\u003e\n  \u003cli\u003eNot resistant to pedestrian traffic and must be covered with a watertight screed or tiles where it will be walked on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, substrate type, whether the application is a bathroom, terrace, foundation or swimming pool, and whether tiles\/screed will be installed over the waterproofing. This allows the actual consumption to be calculated and confirms whether SikaTop® Seal-107 Elastik is the correct system for the detail.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Set (AB)","offer_id":54129927192900,"sku":"753749","price":70.77,"currency_code":"EUR","in_stock":true},{"title":"Module (A)","offer_id":54129927225668,"sku":"753748","price":53.64,"currency_code":"EUR","in_stock":true},{"title":"Module (B)","offer_id":54129927258436,"sku":"105137","price":17.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/elastichna-hidroizolatsia-dvukomponentna-sikalastic-107-elastik.webp?v=1737613492"},{"product_id":"sikatop-seal-107-цименто-полимерна-хидроизолация","title":"SikaTop® Seal-107 - Cement-Polymer Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikaTop® Seal-107\u003c\/strong\u003e is a 2-component cement-polymer waterproofing mortar for concrete, cementitious renders and masonry. It is used as a rigid waterproofing and damp-proofing coating where the substrate is sound, properly prepared and there is no movement in the cracks.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose SikaTop Seal-107?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaTop® Seal-107 when you need a \u003cstrong\u003ecementitious waterproofing\u003c\/strong\u003e solution for interior or exterior moisture protection on concrete, renders and masonry. The product is suitable for basement walls, foundations and filling pores and blowholes, but the TDS specifies that waterproofing of foundations and basements is for cases not subject to hydrostatic pressure.\u003c\/p\u003e\n\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2-component, pre-dosed system: liquid polymer and dry cementitious mix.\u003c\/li\u003e\n  \u003cli\u003eEasy application by brush, trowel or spray.\u003c\/li\u003e\n  \u003cli\u003eVery good adhesion to a properly prepared substrate.\u003c\/li\u003e\n  \u003cli\u003eProtects concrete against carbonation and water ingress.\u003c\/li\u003e\n  \u003cli\u003eNon-corrosive to steel and iron.\u003c\/li\u003e\n  \u003cli\u003eCan be painted after proper curing in accordance with the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component polymer-modified cementitious waterproofing mortar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e25 kg set: 20 kg bag + 5 kg canister\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2.0 kg\/m²\/mm, excluding losses and substrate irregularities\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer thickness\u003c\/td\u003e\n      \u003ctd\u003e0.75-1.5 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended system\u003c\/td\u003e\n      \u003ctd\u003eAt least 2 coats to a total thickness of 1.5-2.0 mm; for high water pressure - 3 coats\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +8 °C to +35 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePot life\u003c\/td\u003e\n      \u003ctd\u003eApprox. 30 minutes at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time between coats\u003c\/td\u003e\n      \u003ctd\u003eApprox. 12 h at +10 °C, 6 h at +20 °C, 3 h at +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubsequent coatings\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 7 days of curing\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere it is suitable\u003c\/h2\u003e\n\u003cp\u003eSikaTop® Seal-107 can be used for interior and exterior waterproofing on concrete, cementitious renders and masonry, for basement walls, filling pores and blowholes, fine cracks without movement and as a levelling layer on concrete. For details under tiles, corners and penetrations, it is important to use a suitable system tape such as \u003ca href=\"\/en\/products\/sika-sealtape-s-elastichna-hidroizoaltsionna-uplatnitelna-lenta-za-oformyane-na-detayli-pod-plochki-v-mokri-pomeshtenia\"\u003eSika® SealTape S\u003c\/a\u003e or \u003ca href=\"\/en\/products\/sika-sealtape-f-uplatnitelna-lenta-za-premostvane-na-puknatini\"\u003eSika® SealTape F\u003c\/a\u003e, depending on the exposure.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe substrate must be sound and clean, free from cement laitance, oils, grease stains and friable particles.\u003c\/li\u003e\n  \u003cli\u003eThe substrate strength must be above 1.0 N\/mm².\u003c\/li\u003e\n  \u003cli\u003ePre-wet the substrate with water to saturation.\u003c\/li\u003e\n  \u003cli\u003eDo not exceed the maximum layer thickness.\u003c\/li\u003e\n  \u003cli\u003eFreshly applied material must be protected from frost, rain and direct adverse exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, substrate type, photos, and information on any active leaks, cracks, water pressure or details around corners and pipes. This determines the number of coats, the required tapes and whether SikaTop® Seal-107 is the correct system for the specific project.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"Set (AB)","offer_id":54129951834436,"sku":"714469","price":36.29,"currency_code":"EUR","in_stock":true},{"title":"Module (A)","offer_id":54129951867204,"sku":"714468","price":21.77,"currency_code":"EUR","in_stock":true},{"title":"Module (B)","offer_id":54129951899972,"sku":"105129","price":14.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaTopSeal-107-2-komponentnaTsimento-polimernahidroizolatsia.webp?v=1737614930"},{"product_id":"sikalastic-260-stop-aqua-techna-1-komponentna-hidroizolatsia-za-mokri-pomeshtenia","title":"Sikalastic®-260 Stop Aqua - Liquid Bathroom Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikalastic®-260 Stop Aqua\u003c\/strong\u003e is a ready-to-use, 1-component liquid waterproofing membrane for bathrooms, shower cabins and indoor wet rooms. The product forms a fully bonded, seamless membrane that is ready for subsequent tile installation.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikalastic-260 Stop Aqua?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikalastic®-260 Stop Aqua when you need fast waterproofing for a bathroom under tiles and the application is indoors. The membrane is water-based, applied by roller or trowel, and is part of a system with Sika® SealTape tapes, primers and tile adhesives.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component liquid waterproofing, ready to use.\u003c\/li\u003e\n  \u003cli\u003eSuitable for bathrooms and shower cabins.\u003c\/li\u003e\n  \u003cli\u003eSeamless membrane under tiles.\u003c\/li\u003e\n  \u003cli\u003eWater-based product.\u003c\/li\u003e\n  \u003cli\u003eFast drying and short waiting time between coats.\u003c\/li\u003e\n  \u003cli\u003eGood crack-bridging ability.\u003c\/li\u003e\n  \u003cli\u003eETA 22\/0411 and VOC classification GEV Emicode EC1plus according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eLiquid-applied waterproofing membrane based on an aqueous dispersion of synthetic resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication\u003c\/td\u003e\n      \u003ctd\u003eIndoor use only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSuitable substrates\u003c\/td\u003e\n      \u003ctd\u003eConcrete, cementitious substrates, dry screeds, gypsum boards, gypsum blocks, gypsum plaster and ceramic tiles\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003e1.4 kg\/L\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003e1.2 kg\/m², applied in two coats\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum thickness\u003c\/td\u003e\n      \u003ctd\u003e0.4 mm wet film per coat; minimum 0.5 mm total dry film\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWatertightness\u003c\/td\u003e\n      \u003ctd\u003eWithstands 150 kPa for 7 days\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time at +20 °C and 50% RH\u003c\/td\u003e\n      \u003ctd\u003e60 min between the first and second coat; 90 min from the second coat to tile installation\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSystem details: joints, drains and pipes\u003c\/h2\u003e\n\u003cp\u003eFor movement joints, floor-to-wall joints, floor drains and pipes, the TDS specifies the use of suitable Sika® SealTape F tapes and collars. This is critical in bathroom and shower areas because most leaks do not occur through the flat area, but at corners, penetrations and drains.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, dry and free from dust, oils, grease, surface treatment compounds and friable particles. The product is supplied ready to use and does not require mixing. Apply evenly with a short-pile roller or trowel, in two coats, after the relevant waiting time.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area of the bathroom or shower zone, substrate type, number of drains, pipe penetrations and internal\/external corners. This allows calculation not only of Sikalastic®-260 Stop Aqua, but also of the required tapes, collars, primer and tile adhesive.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"7 kg.","offer_id":54129992663364,"sku":"705802","price":36.72,"currency_code":"EUR","in_stock":true},{"title":"22 kg.","offer_id":54129992696132,"sku":"705312","price":97.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikalastic-260_Stop_Aqua_-_Techna_1-komponentna_hidroizolatsia_za_mokri_pomeshtenia.webp?v=1737616102"}],"url":"https:\/\/stroitelna-himia.bg\/en\/collections\/sika-produkti.oembed?page=3","provider":"Строителна Химия","version":"1.0","type":"link"}