{"title":"Concrete Products for Repair, Protection and Preparation","description":"\u003ch2\u003eHow to choose concrete products\u003c\/h2\u003e\n\u003cp\u003eStart with the job: are you preparing to pour concrete, repairing a damaged surface or protecting an existing structure? An admixture, repair mortar and protective coating work at different stages and serve different purposes. Understanding their roles makes it easier to select the materials you need and compare the cost of a complete solution.\u003c\/p\u003e\n\u003cp\u003eFor existing concrete, identify the problem first: dusting, water absorption, spalling, cracks, leaks or a damaged joint. Consider the loads, weather exposure and any subsequent finishes. These details are more useful for choosing a material than the appearance of the surface alone.\u003c\/p\u003e\n\u003cp\u003eThis collection brings together Sika and MC-Bauchemie products and supporting Topciment materials for preparing, repairing, treating and protecting concrete substrates. Browse by application or use the brand and product-type filters. Some materials are system components or are applied over an intermediate layer, so their inclusion here does not mean they can be applied directly to every concrete surface.\u003c\/p\u003e\n\u003ch2\u003eAdmixtures, release agents and fresh concrete care\u003c\/h2\u003e\n\u003ch3\u003eAdmixtures for the concrete mix\u003c\/h3\u003e\n\u003cp\u003eChoose \u003ca href=\"\/en\/collections\/dobavki-za-raztvori-i-beton\"\u003econcrete and mortar admixtures\u003c\/a\u003e according to the property you need to improve. Plasticisers and superplasticisers help with workability, while other admixtures are intended for particular placing conditions or reduced water permeability. Selection depends on the mix composition and the construction method. Compatibility must be checked before combining different admixtures.\u003c\/p\u003e\n\u003cp\u003eA water-resisting admixture is only one part of the solution: joints, pipe penetrations and other details still require correct design and execution. Cold-weather concreting also calls for suitable site procedures and protection of the fresh concrete. Select and dose the admixture for the actual mix and placing conditions.\u003c\/p\u003e\n\u003ch3\u003eFormwork and protection after placing\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/kofrazhni-masla\"\u003eFormwork release agents\u003c\/a\u003e help separate the formwork from the concrete. Choose them for the formwork surface and the required concrete finish. For exposed architectural concrete, formwork cleanliness, even application and subsequent treatments also matter.\u003c\/p\u003e\n\u003cp\u003eAfter placing, concrete needs appropriate care to prevent premature water loss. Products used for this purpose serve a different role from an impregnation treatment for a finished floor or a concrete coating. If bonding, rendering or coating will follow, check compatibility with the curing compound and the preparation needed for the next layer.\u003c\/p\u003e\n\u003ch2\u003eDry-shake hardeners and concrete floors\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/posipki-za-beton\"\u003eConcrete dry-shake hardeners\u003c\/a\u003e form part of the construction of particular concrete floor systems. Their application differs from painting an existing floor. Consider the future loads, indoor conditions, placing method and required finish when choosing a system.\u003c\/p\u003e\n\u003cp\u003eFor an existing garage, warehouse or workshop, assess the floor first. Contamination, weak concrete and cracking need attention before the final coating. If you need a new wearing or decorative layer, compare \u003ca href=\"\/en\/collections\/podovi-pokritia\"\u003efloor coatings\u003c\/a\u003e according to traffic, cleaning requirements and exposure.\u003c\/p\u003e\n\u003ch2\u003eRepairing crumbling and damaged concrete\u003c\/h2\u003e\n\u003cp\u003eFor chipped edges, damaged concrete cover or local defects, consider \u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003econcrete repair mortars\u003c\/a\u003e. Materials for rebuilding missing concrete, fine levelling and preparation before a protective coating have different roles. Choose the mortar according to the repair, surface orientation and subsequent layers.\u003c\/p\u003e\n\u003cp\u003eSealing the surface is not enough to restore every type of crumbling concrete. Identify weak and loose areas and establish the cause of the damage. Exposed corroded reinforcement or concerns about load-bearing capacity call for a structural assessment. Surface treatment does not replace the necessary structural repair.\u003c\/p\u003e\n\u003cp\u003eA primer, reinforcement corrosion protection, bonding layer and repair mortar each have a specific function within a repair system. For filling beneath machinery, baseplates or other elements, see \u003ca href=\"\/en\/collections\/zamonolitvashti-raztvori\"\u003egrouts and underfill materials\u003c\/a\u003e; these applications differ from cosmetic surface levelling.\u003c\/p\u003e\n\u003ch2\u003eImpregnation treatment, sealer or protective coating\u003c\/h2\u003e\n\u003cp\u003eWhen choosing \u003ca href=\"\/en\/collections\/импрегниране-и-запечатване-на-бетон\"\u003econcrete impregnation treatments and sealers\u003c\/a\u003e, define the effect you want. A hydrophobic impregnation treatment reduces water absorption in a suitable absorbent substrate. Other products are selected for surface consolidation or sealing. The name “impregnation treatment” alone does not establish the finish, behaviour or suitability for a heavily used floor.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eProtective concrete coatings\u003c\/a\u003e form a separate protective layer and have their own substrate and service requirements. When looking for “concrete paint”, specify whether the surface is a façade, wall, garage floor or structure. A coating for vertical concrete may have a different purpose from a flooring system; check suitability for vehicle traffic or the relevant chemical exposure.\u003c\/p\u003e\n\u003cp\u003eAlso consider the appearance: clear or pigmented finish, gloss level and retention of the mineral texture. A small representative test area is useful for exposed concrete. Establish how the surface will be cleaned and what future maintenance or renewal will involve.\u003c\/p\u003e\n\u003ch2\u003ePrimers and concrete substrate preparation\u003c\/h2\u003e\n\u003cp\u003eChoose a primer according to substrate condition, absorbency and the material to be applied over it. \u003ca href=\"\/en\/collections\/kontakten-grund\"\u003eContact primers and bonding bridges\u003c\/a\u003e support adhesion in specific applications. A textured bonding primer, epoxy primer and sealant primer serve different purposes.\u003c\/p\u003e\n\u003cp\u003eDust, laitance, oil, weak layers and incompatible old coatings can affect the next treatment. Assess moisture for the selected system too. There is no single percentage that applies to all primers and coatings: the measurement method and requirements of the complete solution matter. Prepare a sound, stable substrate before applying the specified primer.\u003c\/p\u003e\n\u003ch2\u003eCracks, joints, waterproofing and anchoring\u003c\/h2\u003e\n\u003cp\u003eA crack is a defect or a result of movement, while a joint may be an intentional construction detail. For \u003ca href=\"\/en\/collections\/zapalvane-na-puknatini-i-fugi\"\u003efilling cracks and joints in concrete\u003c\/a\u003e, selection depends on the cause, movement and presence of water. Rigid filling, elastic sealing and injection address different needs. Stopping a leak and restoring load transfer across a crack are separate repair objectives. Active movement joints need a solution that accommodates the expected movement.\u003c\/p\u003e\n\u003cp\u003eFor below-ground structures and areas exposed to water, explore \u003ca href=\"\/en\/collections\/hidroizolatsia-za-osnovi-i-saorazhenia\"\u003efoundation and structural waterproofing\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/хидроизолация-за-фуги\"\u003ejoint waterproofing\u003c\/a\u003e. Coatings, tapes, connections and drainage need to work together. A rain-repellent impregnation treatment should not be assumed to resist water pressure.\u003c\/p\u003e\n\u003cp\u003eFor fastening elements to concrete, use suitable \u003ca href=\"\/en\/collections\/materiali-za-ankerirane\"\u003echemical anchors and accessories\u003c\/a\u003e. Selection depends on the substrate, the element being fixed and the loads. Anchoring resins, assembly adhesives and grouts have different functions, even where all are used in fixing applications.\u003c\/p\u003e\n\u003ch2\u003eConcrete product prices and the cost of a complete solution\u003c\/h2\u003e\n\u003cp\u003eCompare materials by purpose and include the full scope of work. A low price per pack does not, on its own, show the cost of a repair or protective system. The budget may include preparation, primer, main material, a required second component, finishing coat and consumables. For two-component products, check whether the price covers the complete kit or a separate component.\u003c\/p\u003e\n\u003cp\u003eTo estimate a cost per m², use the selected products' consumption for the actual substrate and allow for pack sizes. Joints, anchoring and grouting require different quantity calculations, so a price per square metre is not appropriate for every task. Separate labour, site access and repairs from the material cost.\u003c\/p\u003e\n\u003cp\u003eFor a suitable proposal, \u003ca href=\"\/en\/pages\/contact\"\u003esend an enquiry\u003c\/a\u003e with a description and photographs of the substrate, the area or dimensions, visible problems, service conditions and desired result. Specify whether you need materials alone or installation as well. This allows the selection to start with the actual project and a compatible combination of materials.\u003c\/p\u003e","products":[{"product_id":"sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane","title":"Sika AnchorFix®-2+ - Chemical Anchor for Medium and Heavy Loads","description":"\u003ch2\u003eSika AnchorFix-2+ for Medium and Heavy Loads\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-2+\u003c\/strong\u003e is a 2-component anchoring adhesive based on epoxy-acrylate, solvent-free and styrene-free. It is intended for normal and moderate climatic conditions and is used for anchoring reinforcing steel, threaded rods, bolts and special fastening systems.\u003c\/p\u003e\n\u003cp\u003eAnchorFix-2+ is the right choice when you need a chemical anchor for \u003cstrong\u003emedium and heavy loads\u003c\/strong\u003e, cracked or uncracked concrete, solid masonry, steel, hard natural stone or solid rock. According to the technical data sheet, the product has ETA for anchoring in concrete and for post-installed rebar, as well as seismic testing C1.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-2+\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAnchoring threaded rods, bolts, reinforcing bars and special fastening systems.\u003c\/li\u003e\n  \u003cli\u003eMedium and heavy-duty fixings in cracked and uncracked concrete.\u003c\/li\u003e\n  \u003cli\u003eInstallations where it is important that the adhesive does not sag when working overhead.\u003c\/li\u003e\n  \u003cli\u003eProjects with design requirements for ETA, post-installed rebar or seismic testing C1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Reference Data\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component epoxy-acrylate anchoring adhesive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 10 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 70 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +30 °C during application\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom -5 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 5 minutes \/ 50 minutes at +20 °C to +25 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e300 ml, 550 ml and 850 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAdvantages for Professional Installation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh load-bearing capacity and fast curing.\u003c\/li\u003e\n  \u003cli\u003eSuitable for cracked concrete.\u003c\/li\u003e\n  \u003cli\u003eApproved for contact with drinking water according to the WRAS approval stated in the TDS.\u003c\/li\u003e\n  \u003cli\u003eStyrene-free, low odour and low wastage.\u003c\/li\u003e\n  \u003cli\u003eNo transport restrictions according to the technical data sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Application Conditions\u003c\/h2\u003e\n\u003cp\u003eThe substrate must have verified load-bearing capacity, and the anchor hole must be clean, dry and free from oil, grease and loose or crumbling particles. Concrete and mortar must be more than 28 days old, unless the design and technical dimensioning specify otherwise.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-3030\u003c\/h2\u003e\n\u003cp\u003eIf the project is structurally critical, the concrete is damp or an epoxy system with a long open time is required, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e. For faster standard installations with lower requirements, see \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-2+ suitable for cracked concrete?\u003c\/h3\u003e\n\u003cp\u003eYes. The technical data sheet states that the product is suitable for cracked concrete, with final dimensioning to be carried out according to the project design and anchoring tables.\u003c\/p\u003e\n\u003ch3\u003eCan it be used at low temperature?\u003c\/h3\u003e\n\u003cp\u003eYes, the substrate temperature can be from -5 °C to +30 °C, but the cartridge must be at least +5 °C and the curing time changes depending on the temperature.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference compared with AnchorFix-1?\u003c\/h3\u003e\n\u003cp\u003eAnchorFix-1 is a faster standard polyester-based solution. AnchorFix-2+ is an epoxy-acrylate system for medium and heavy loads, cracked\/uncracked concrete and higher design requirements.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-anchorfix2\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Solutions for AnchorFix®-2+\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e AnchorFix-2+ is a strong, versatile choice for medium and heavy loads. If the project requires a long open time, very heavy structural fixing or specific work in damp concrete, compare it with the epoxy AnchorFix-3030.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the category, see \u003ca href=\"\/en\/collections\/materiali-za-ankerirane\"\u003eanchoring materials\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor heavy-duty epoxy fixings, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix®-3030\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor faster, lighter fixings, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix®-1\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"300 ml - 12pcs","offer_id":48728746524996,"sku":"592691","price":165.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/anchorfix2_-Ankerirashtolepilozasrednoitezhkonatovarvane.webp?v=1719418473"},{"product_id":"sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo","title":"Sika AnchorFix®-1 - Fast-Curing Chemical Anchor","description":"\u003ch2\u003eSika AnchorFix-1 for Fast Chemical Anchoring\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-1\u003c\/strong\u003e is a 2-component, styrene-free and solvent-free polyester anchoring adhesive. It is used as a fast-curing chemical anchor for reinforcing bars, threaded rods, bolts and other fixing systems in concrete, solid and hollow masonry, hard natural stone and solid rock.\u003c\/p\u003e\n\u003cp\u003eIt is a practical choice where fast installation with a short open time is required. For different types of stone and masonry, the technical data sheet requires a trial area, because substrates can vary in strength, composition and porosity.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-1\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFast anchoring of threaded rods, bolts and fixing elements.\u003c\/li\u003e\n  \u003cli\u003eInstallation in concrete, solid masonry, hollow masonry and hard natural stone.\u003c\/li\u003e\n  \u003cli\u003eApplications where it is important that the adhesive does not sag during overhead installation.\u003c\/li\u003e\n  \u003cli\u003eProjects where a standard cartridge and application with a standard dispensing gun are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Guidance\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component polyester anchoring adhesive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 10 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 60 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C during application\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom -10 °C to +40 °C; application at -10 °C is not stated in the ETA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 5 minutes \/ 50 minutes at +20 °C to +25 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e150 ml, 300 ml and 550 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eImportant Conditions for Reliable Anchoring\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe hole must be clean, dry and free from oils, grease, dust and loose particles.\u003c\/li\u003e\n  \u003cli\u003eThreaded rods and reinforcing bars must be cleaned of oils, dust and other contamination.\u003c\/li\u003e\n  \u003cli\u003eThe ambient temperature must be at least 3 °C above the dew point to avoid condensation.\u003c\/li\u003e\n  \u003cli\u003eFor hollow masonry, use \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix perforated sleeves\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eComparison with AnchorFix-2+ and AnchorFix-3030\u003c\/h2\u003e\n\u003cp\u003eIf the project requires medium\/heavy loads, cracked concrete, ETA for concrete and higher load-bearing capacity, see \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e. For epoxy anchoring in dry or damp concrete, long open time and heavy-duty structural fixings, see \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-1 suitable for hollow bricks?\u003c\/h3\u003e\n\u003cp\u003eYes, but a suitable perforated sleeve must be used and the instructions for cleaning, filling and inserting the anchor must be followed.\u003c\/p\u003e\n\u003ch3\u003eHow quickly does it cure?\u003c\/h3\u003e\n\u003cp\u003eAt +20 °C to +25 °C, the technical data sheet gives an open time of approx. 5 minutes and a curing time of approx. 50 minutes. At lower temperatures, the process slows down.\u003c\/p\u003e\n\u003ch3\u003eCan it be used overhead?\u003c\/h3\u003e\n\u003cp\u003eYes. According to the technical data sheet, the product does not sag even during overhead installation when applied correctly.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"300 ml - 12pcs","offer_id":48790269690180,"sku":"497848","price":132.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaAnchorFix_-1-Barzovtvardyavashtoankerirashtolepilo.webp?v=1718631829"},{"product_id":"sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo","title":"Sika AnchorFix®-3030 - epoxy chemical anchor for heavy loads","description":"\u003ch2\u003eSika AnchorFix-3030 for heavy-duty epoxy anchoring\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-3030\u003c\/strong\u003e is a 2-component, thixotropic, high-performance anchoring adhesive based on epoxy resin. It is used for anchoring threaded rods and reinforcing bars in cracked and non-cracked, dry or damp concrete.\u003c\/p\u003e\n\u003cp\u003eThis is the most suitable AnchorFix choice for heavy-duty and structurally critical fixings where an epoxy chemical base, high load-bearing capacity, long open time, C1\/C2 seismic testing and reliable performance in refurbishment or new construction are required.\u003c\/p\u003e\n\u003ch2\u003eWhen to choose AnchorFix-3030\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAnchoring reinforcing steel in refurbishment and new construction.\u003c\/li\u003e\n  \u003cli\u003eThreaded rods, bolts and special fastening systems under heavy loads.\u003c\/li\u003e\n  \u003cli\u003eFixing handrails, balustrades, railings, supports, rails, window and door frames.\u003c\/li\u003e\n  \u003cli\u003eCracked and non-cracked concrete, including dry or damp concrete.\u003c\/li\u003e\n  \u003cli\u003eProjects requiring a longer open time than fast-curing AnchorFix systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical guide values\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component epoxy resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 3 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 95 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +10 °C to +40 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 18 minutes \/ 8 hours at +20 °C to +25 °C; up to 300 minutes \/ 24 hours at +5 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e300 ml, 385 ml and 585 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAdvantages for structural applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLong open time for more controlled work on complex details.\u003c\/li\u003e\n  \u003cli\u003eCan be used in damp concrete.\u003c\/li\u003e\n  \u003cli\u003eETA for anchoring in cracked concrete and ETA for post-installed rebar.\u003c\/li\u003e\n  \u003cli\u003eTested for seismic loading C1 and C2.\u003c\/li\u003e\n  \u003cli\u003eCures without shrinkage and has high adhesion to the substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant before installation\u003c\/h2\u003e\n\u003cp\u003eThe anchor hole must always be clean, dry, free from oils, grease and loose particles, except where the specific application permits damp concrete according to the technical data sheet and the design. Threaded rods and reinforcing bars must be cleaned of dust, oil, corrosion and other contaminants.\u003c\/p\u003e\n\u003cp\u003eFor hollow masonry, use \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix perforated sleeves\u003c\/a\u003e. If you need a faster solution for more standard anchoring, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e or \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-3030 suitable for damp concrete?\u003c\/h3\u003e\n\u003cp\u003eYes. The technical data sheet specifies use for threaded rods and reinforcing bars in cracked and non-cracked, dry or damp concrete.\u003c\/p\u003e\n\u003ch3\u003eWhy is open time important?\u003c\/h3\u003e\n\u003cp\u003eFor more complex or structural anchors, the long open time provides greater control during injection, positioning and installation of the anchor, especially at lower temperatures.\u003c\/p\u003e\n\u003ch3\u003eCan it be used with a standard gun?\u003c\/h3\u003e\n\u003cp\u003eThe technical data sheet states that the 300 ml cartridge can be applied with a standard applicator gun. For other cartridge sizes, check the required gun and mixing nozzle.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-anchorfix3030\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for AnchorFix®-3030\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e AnchorFix-3030 is the right choice for heavy-duty and structurally critical fixings where an epoxy chemical base, long open time and work in dry or damp concrete are required. For faster or lighter-duty tasks, another AnchorFix product may be sufficient.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the full selection of anchoring products, see \u003ca href=\"\/en\/collections\/materiali-za-ankerirane\"\u003eanchoring materials\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor medium and heavy loads with epoxy acrylate, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix®-2+\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor hollow masonry and bricks, see \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix® perforated sleeves\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"585 ml - 12pcs","offer_id":48790530621764,"sku":"724684","price":541.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/anchorfix2_-Ankerirashtolepilozasrednoitezhkonatovarvane.webp?v=1719418473"},{"product_id":"perforirani-vtulki-za-sika-anchorfix","title":"Sika AnchorFix® Perforated Sleeves – for hollow masonry","description":"\u003ch2\u003eSika AnchorFix Perforated Sleeves for hollow masonry and hollow bricks\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix Perforated Sleeves\u003c\/strong\u003e are plastic perforated sleeves for anchoring in hollow bricks and hollow masonry in combination with Sika AnchorFix chemical anchors. The sleeve helps the resin distribute around the anchor and pass through the perforations, instead of being lost uncontrollably into the voids.\u003c\/p\u003e\n\u003cp\u003eUse them when working with hollow masonry, hollow bricks, or substrates where standard direct resin injection does not provide proper encapsulation of the anchor. This is an accessory for the AnchorFix system, not a stand-alone anchor.\u003c\/p\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy and fast installation.\u003c\/li\u003e\n  \u003cli\u003eImproved anchoring in hollow masonry.\u003c\/li\u003e\n  \u003cli\u003eLower loss of anchoring material.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with Sika AnchorFix systems according to the relevant product approvals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSizes according to the technical data sheet\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eLength\u003c\/th\u003e\n      \u003cth\u003eDiameter\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e50 mm\u003c\/td\u003e\n      \u003ctd\u003e12 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e85 mm\u003c\/td\u003e\n      \u003ctd\u003e16 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e85 mm\u003c\/td\u003e\n      \u003ctd\u003e20 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e130 mm\u003c\/td\u003e\n      \u003ctd\u003e16 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDrill the hole and clean it of dust and contaminants.\u003c\/li\u003e\n  \u003cli\u003eInsert the perforated sleeve into the hole.\u003c\/li\u003e\n  \u003cli\u003eFill the sleeve with a suitable Sika AnchorFix adhesive, starting from the bottom.\u003c\/li\u003e\n  \u003cli\u003eClose the cap when required to prevent resin leakage.\u003c\/li\u003e\n  \u003cli\u003eInsert the anchor with a twisting motion within the open time of the adhesive.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCompatible products\u003c\/h2\u003e\n\u003cp\u003eThe sleeves are used with chemical anchors from the Sika AnchorFix system. For fast standard installations, see \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e. For medium and heavy loads, see \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e. For epoxy anchoring in heavy-duty and structural applications, see \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs a sleeve required for hollow bricks?\u003c\/h3\u003e\n\u003cp\u003eYes. For hollow bricks and hollow masonry, the sleeve is the correct system accessory. It retains and distributes the resin around the anchor.\u003c\/p\u003e\n\u003ch3\u003eCan it be used with any chemical anchor?\u003c\/h3\u003e\n\u003cp\u003eUse the sleeves with Sika AnchorFix anchoring compounds and always check the relevant product technical data sheet\/approval.\u003c\/p\u003e\n\u003ch3\u003eWhat colour are the sleeves?\u003c\/h3\u003e\n\u003cp\u003eAccording to the technical data sheet, the sleeves are white plastic sleeves.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"12\/50 - 100 pcs.","offer_id":48824003199300,"sku":"152380","price":44.28,"currency_code":"EUR","in_stock":true},{"title":"16\/130 - 100 pcs.","offer_id":48824003232068,"sku":"531101","price":55.08,"currency_code":"EUR","in_stock":true},{"title":"16\/85 - 100 pcs.","offer_id":48824003264836,"sku":"531100","price":49.68,"currency_code":"EUR","in_stock":true},{"title":"20\/85 - 100 pcs.","offer_id":48824003297604,"sku":"152381","price":55.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/PerforiranivtulkizaSikaAnchorFix.webp?v=1719919763"},{"product_id":"sikagard-680-s-ednokomponentno-zashtitno-pokritie-za-beton","title":"Sikagard®-680 S Betoncolor - Protective Coating for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-680 S Betoncolor\u003c\/strong\u003e is a 1-component \u003cstrong\u003eprotective coating for concrete\u003c\/strong\u003e based on solvent-borne methacrylate resin. It is used on concrete and other cementitious mineral substrates where protection against weathering, carbonation and contamination is required, without significantly changing the characteristic texture of the concrete.\u003c\/p\u003e\n\n\u003cp\u003eThe product is available as a clear version and in RAL colours. It is suitable for facade and civil engineering concrete surfaces where a protective and decorative finish is required, with resistance to ageing, weathering and alkalinity.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikagard®-680 S Betoncolor?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor protecting concrete facades and elements\u003c\/strong\u003e - where the concrete is exposed to weathering and contamination.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor reducing carbonation\u003c\/strong\u003e - where the system must limit the penetration of carbon dioxide into the concrete.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor mineral cementitious substrates\u003c\/strong\u003e - concrete, repair mortars and other stable cementitious surfaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor a protective and decorative finish\u003c\/strong\u003e - where a clear or RAL colour version is required according to the project.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProperty\u003c\/th\u003e\n      \u003cth\u003ePractical benefit\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeather resistance\u003c\/td\u003e\n      \u003ctd\u003eSuitable for external concrete and cementitious surfaces exposed to rain and contamination.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHigh diffusion resistance to CO₂\u003c\/td\u003e\n      \u003ctd\u003eHelps reduce the rate and depth of concrete carbonation.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaintains water vapour permeability\u003c\/td\u003e\n      \u003ctd\u003eThe protection should not block the normal vapour permeability of a suitably prepared substrate.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduced dirt retention\u003c\/td\u003e\n      \u003ctd\u003eThe surface becomes dirty less easily and discolours less from rain and weathering.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eClear or RAL colour?\u003c\/h2\u003e\n\u003cp\u003eThe clear version is suitable when the aim is to preserve the visible structure of the concrete. The RAL colour versions are more suitable when, in addition to protection, a uniform decorative finish is required. The variants available in the store include 20 kg clear and 30 kg in RAL1015, RAL7032, RAL7030, RAL7035, RAL9001, RAL9002 and a clear version.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe substrate must be sound, dry, clean and free from dust, oils, friable material or weak old coatings.\u003c\/li\u003e\n  \u003cli\u003eFor repair mortars and new concrete, check the minimum age and moisture content according to the technical data sheet.\u003c\/li\u003e\n  \u003cli\u003eDo not choose the product by colour alone; check whether the main objective is protection against carbonation, weathering or a decorative finish.\u003c\/li\u003e\n  \u003cli\u003eFor heavily trafficked floors, permanent water exposure or chemical exposure, another Sika system should be checked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated categories\u003c\/h2\u003e\n\u003cp\u003eFor system selection, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003erepair mortars for concrete\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eSika waterproofing\u003c\/a\u003e. If you send photos, the area, substrate type and whether a clear or RAL finish is required, a more accurate system and primer\/preparation method can be selected.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard680s\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikagard®-680 S Betoncolor\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-680 S Betoncolor is a protective and decorative coating for concrete. The final result depends on the cleanliness and soundness of the substrate, the required primer, the choice between a clear and RAL finish, and whether the objective is protection against carbonation, weathering or visual refreshment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the category, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a water-based primer, compare with \u003ca href=\"\/en\/products\/sikagard-552-w-aquaprimer-grund-na-vodna-osnova\"\u003eSikagard®-552 W Aquaprimer\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a coating with high crack-bridging ability, see \u003ca href=\"\/en\/products\/sikagard-5500-zashtitno-pokritie-za-beton-s-visoka-sposobnost-za-premostvane-na-puknatini\"\u003eSikagard®-5500\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"20kg. \/ Colorless","offer_id":49288895398212,"sku":"5769","price":228.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-680_S_ednokomponentno_zashtitno_pokritie_za_beton.webp?v=1720433959"},{"product_id":"sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi","title":"Sikagard®-700 S - Water-Repellent Impregnation for Concrete and Facades","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-700 S\u003c\/strong\u003e is a colourless silane\/siloxane water-repellent impregnation for absorbent cementitious substrates, concrete, cement renders, concrete slabs, masonry and natural stone. The product penetrates into open pores, reduces capillary water absorption and allows water vapour diffusion without acting as a vapour barrier.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikagard 700 S?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-700 S when you need a water-repellent impregnation for concrete or mineral facade substrates that must retain their natural appearance. It is suitable for surfaces exposed to weathering and can also be used as a hydrophobic impregnation beneath compatible protective coatings.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces capillary water absorption.\u003c\/li\u003e\n  \u003cli\u003eLimits efflorescence and the penetration of dirt into the pores.\u003c\/li\u003e\n  \u003cli\u003eReduces the ingress and diffusion of chloride ions.\u003c\/li\u003e\n  \u003cli\u003eUsually does not change the appearance of the substrate.\u003c\/li\u003e\n  \u003cli\u003eAllows water vapour diffusion and does not act as a vapour barrier.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated with suitable solvent-based or emulsion-based coatings.\u003c\/li\u003e\n  \u003cli\u003eMeets the requirements for a hydrophobic impregnation according to BDS EN 1504-2, Class I according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eSilane\/siloxane blend in organic solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eColourless liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~0.800 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003e1-2 coats of Sikagard®-700 S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~0.300-0.500 kg\/m² per coat on normally absorbent substrates\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;5-6% when measured with Tramex\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time before compatible coatings\u003c\/td\u003e\n\u003ctd\u003eAt least 5 hours after the hydrophobic impregnation\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 3 hours after application at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eSikagard®-700 S is not a waterproofing solution for hydrostatic pressure, permanent contact with water or waterproofing of underground structures. Visible cracks allowing moisture ingress must be treated separately. On natural stone and where high aesthetic requirements apply, prepare a trial area, as slight darkening may occur on some substrates.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the substrate type, approximate area, whether there are cracks or efflorescence, and whether a subsequent coating will be applied over the impregnation. This helps assess the required consumption and whether Sikagard®-700 S is the right choice compared with a water-based impregnation such as Sikagard®-703 W.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5l.","offer_id":49284386652484,"sku":"151824","price":97.42,"currency_code":"EUR","in_stock":true},{"title":"20l.","offer_id":49284386685252,"sku":"151821","price":270.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-700S-Vodootblaskvashtimpregnatorzatsimentovipovarhnosti_fasadi.webp?v=1726741140"},{"product_id":"sikagard-703-w-vodootblaskvasht-impregnator-za-fasadi-1","title":"Sikagard®-703 W - Water-Repellent Facade Impregnator","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-703 W\u003c\/strong\u003e is a ready-to-use, water-based water-repellent impregnation for facades and porous mineral substrates. It is used on mortar, brick, stone, asbestos cement and other absorbent facade materials where protection against water penetration is required without a visible change in appearance.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikagard 703 W?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-703 W for facades, masonry and stone surfaces where water-repellent protection with water vapour permeability is required. It is a practical choice for facade maintenance because reduced water absorption limits soiling and the conditions for the development of fungi, mould and lichens.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eStrong water-repellent performance for facade substrates.\u003c\/li\u003e\n  \u003cli\u003eWater vapour permeable - allows the substrate to \"breathe\".\u003c\/li\u003e\n  \u003cli\u003eInvisible treatment that does not change the appearance of the substrate.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance to soiling by reducing water absorption.\u003c\/li\u003e\n  \u003cli\u003eLimits the conditions for the development of fungi, mould and lichens.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated with suitable paints and coatings.\u003c\/li\u003e\n  \u003cli\u003eReady-to-use, water-based product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eCombination of silane\/siloxane\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhitish liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.0 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on mortar\u003c\/td\u003e\n\u003ctd\u003e~150-200 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on other porous materials\u003c\/td\u003e\n\u003ctd\u003e~300-500 g\/m² depending on porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time before compatible coatings\u003c\/td\u003e\n\u003ctd\u003eAt least 5 hours after applying the hydrophobic impregnation\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 3 hours after application at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, sound and free from dust, grease stains, efflorescence and old coatings. Cracks wider than 300 μm must be repaired before application. For all substrates, it is good practice to carry out a trial area, especially where the final appearance is critical.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the facade material, area, approximate porosity and whether there are cracks or old coatings. This helps estimate the actual consumption and whether Sikagard®-703 W is more suitable than a deeper-penetrating solvent-based impregnation such as Sikagard®-700 S.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"2l.","offer_id":49284402741572,"sku":"406943","price":19.55,"currency_code":"EUR","in_stock":true},{"title":"20l.","offer_id":49284402774340,"sku":"437349","price":112.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-703W-Vodootblaskvashtimpregnatorzafasadi.webp?v=1726741937"},{"product_id":"sikagard-905-w-impregnator-i-povarhnosten-vtvarditel-za-obrabotka-sreshtu-izsolvane-i-izbivane-na-vlaga","title":"Sikagard®-905 W - Impregnator and Surface Hardener Against Efflorescence","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-905 W\u003c\/strong\u003e is a ready-to-use, water-based impregnator and surface hardener for treatment against efflorescence, damp patches and dusting on weak mineral substrates. Once dry, it is transparent and creates a physical barrier that reduces moisture and the conditions for mold growth.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikagard 905 W be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-905 W for plaster, skim coats, brick or stone where there are traces of efflorescence, local dampness or surface dusting. The product penetrates deeply due to its low viscosity and can prepare weak, dusting substrates before painting.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVery low viscosity for deep penetration into the substrate.\u003c\/li\u003e\n  \u003cli\u003eAlmost invisible after drying.\u003c\/li\u003e\n  \u003cli\u003eSuitable for treatment against efflorescence and damp patches.\u003c\/li\u003e\n  \u003cli\u003eCan be used as a surface hardener for weak and dusty substrates.\u003c\/li\u003e\n  \u003cli\u003eCan be covered with paints or wallpaper after full drying.\u003c\/li\u003e\n  \u003cli\u003eSuitable for interior and exterior use.\u003c\/li\u003e\n  \u003cli\u003eUV resistant and without biocidal\/algicidal raw materials according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eWater-based impregnating and damp-proofing resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eMilky white liquid, transparent after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.01 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003eTypically ~0.2-0.3 l\/m² per coat, depending on porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eBy brush or roller, rubbing in until the substrate is saturated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecond coat\u003c\/td\u003e\n\u003ctd\u003eOn highly absorbent substrates, after the first coat has dried\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVOC content\u003c\/td\u003e\n\u003ctd\u003e~0.0 g\/l according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eSikagard®-905 W does not solve moisture caused by condensation on cold walls and is not a substitute for full restoration where plaster is severely damaged. Visible traces of efflorescence, mold and biological growth must be removed before application. If the material is to remain without a subsequent coating, make a test area, as under some conditions it may slightly change the appearance of the substrate.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDescribe whether the problem is efflorescence, dusting, moisture from the substrate or condensation, and what coating will be applied afterwards. This is important because Sikagard®-905 W is the correct choice for surface impregnation and strengthening, but it does not replace structural waterproofing.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"2l.","offer_id":49284405985604,"sku":"95594","price":17.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-905W_-Impregnatoripovarhnostenvtvarditelzaobrabotkasreshtuizsolvaneiizbivanenavlaga.webp?v=1726742540"},{"product_id":"sikagard-907-w-impregnator-za-poryozni-nastilki-i-stabilizator-na-pyasachni-fugi","title":"Sikagard®-907 W - Impregnator for Porous Paving and Sand Joints","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-907 W\u003c\/strong\u003e is a 1-component, UV-resistant, water-based impregnator for protecting porous paving and stabilizing sand joints. The product protects surfaces against water, oils and other aggressive liquids, and in joints it penetrates the sand, stabilizes it and reduces erosion.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikagard 907 W be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-907 W for paved surfaces, terraces, car parks, ramps, yards, pedestrian areas, commercial areas and porous concrete or stone paving. It is suitable when both surface impregnation and stabilization of sand joints are required.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component product, ready to use, without dilution.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant and weather-resistant.\u003c\/li\u003e\n  \u003cli\u003eProtects against water, oils and fuels.\u003c\/li\u003e\n  \u003cli\u003eReduces staining from hydrocarbon-based materials.\u003c\/li\u003e\n  \u003cli\u003eResistant to de-icing salts.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance to freeze\/thaw cycles.\u003c\/li\u003e\n  \u003cli\u003eStabilizes sand joints, reduces erosion and limits weed growth.\u003c\/li\u003e\n  \u003cli\u003eMakes cleaning easier and may intensify the colour of the substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylic dispersion-based resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eMilky white liquid, colourless\/transparent after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.01 kg\/L at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e~9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on paved surfaces with sand joints\u003c\/td\u003e\n\u003ctd\u003e~0.5–1.5 L\/m² for the first coat; ~0.100–0.200 L\/m² for the second coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on other surfaces without joints\u003c\/td\u003e\n\u003ctd\u003e~0.200–0.300 L\/m² for the first coat; ~0.100–0.150 L\/m² for the second coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 6 hours at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePedestrian traffic\u003c\/td\u003e\n\u003ctd\u003eApproximately after ~4–5 hours at around +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLight traffic \/ full loading\u003c\/td\u003e\n\u003ctd\u003e~24 hours \/ ~72 hours at around +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be thoroughly cleaned and dry. For sand joints, check that the sand is sufficiently dry and compacted, without excessive compaction that would reduce penetration. The product is not suitable where there is high chemical exposure.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the type of paving, the area, the width and depth of the joints, whether there will be vehicle traffic and what type of contamination is expected. This makes it possible to assess consumption and whether one or two coats are required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard907w\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikagard®-907 W\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-907 W is a practical choice when you need an impregnator for pavers, porous paving and sand joints. For concrete floors, façades or heavily loaded industrial areas, another sealer or protective system may be required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor concrete impregnators and sealers, see \u003ca href=\"\/en\/collections\/%D0%B8%D0%BC%D0%BF%D1%80%D0%B5%D0%B3%D0%BD%D0%B8%D1%80%D0%B0%D0%BD%D0%B5-%D0%B8-%D0%B7%D0%B0%D0%BF%D0%B5%D1%87%D0%B0%D1%82%D0%B2%D0%B0%D0%BD%D0%B5-%D0%BD%D0%B0-%D0%B1%D0%B5%D1%82%D0%BE%D0%BD\"\u003econcrete impregnation and sealing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor water-repellent façade protection, compare with \u003ca href=\"\/en\/products\/sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi\"\u003eSikagard®-700 S\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor an acrylic sealer for concrete floors, see \u003ca href=\"\/en\/products\/sikafloor-proseal-12-akrilaten-sastav-za-impregnirane-i-zapechatka-na-betonni-povarhnosti\"\u003eSikafloor® ProSeal-12\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"5l.","offer_id":49284433150276,"sku":"158935","price":51.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-907W_-Impregnatorzaporyozninastilkiistabilizatornapyasachnifugi.webp?v=1726742860"},{"product_id":"sikagard-720-epocem-epoksi-tsimentov-raztvor-za-zapechatka-na-pori","title":"Sikagard®-720 EpoCem® - Epoxy-Cement Pore Sealing Mortar","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-720 EpoCem®\u003c\/strong\u003e is a 3-component epoxy-cement fine mortar for pore sealing, levelling and finishing concrete, mortar and stone surfaces. It is used as a 0.5-3 mm layer, including on damp or recently placed concrete substrates, where preparation is required before subsequent resin coatings.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose Sikagard 720 EpoCem?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-720 EpoCem® for concrete surfaces with pores, unevenness or high moisture, where a smooth, strong and technically controlled substrate must be created. The product is suitable for new construction and repair of concrete with a damaged surface, including in chemically aggressive environments.\u003c\/p\u003e\n\n\u003ch2\u003eMain Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLevelling layer on concrete or mortar at a thickness of 0.5-3 mm.\u003c\/li\u003e\n  \u003cli\u003ePore sealing, smoothing and levelling of concrete surfaces.\u003c\/li\u003e\n  \u003cli\u003ePreparation for smooth finishing coatings.\u003c\/li\u003e\n  \u003cli\u003eTemporary moisture barrier with a minimum thickness of 2 mm under epoxy, polyurethane or PMMA resin coatings requiring a dry substrate.\u003c\/li\u003e\n  \u003cli\u003eApplication on substrates with high moisture and on recently placed concrete, without standing water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter chemical resistance compared with polymer-cement mortars and screeds.\u003c\/li\u003e\n  \u003cli\u003eExcellent protection of concrete in aggressive environments.\u003c\/li\u003e\n  \u003cli\u003eImpermeable to liquids, yet vapour-permeable.\u003c\/li\u003e\n  \u003cli\u003eExcellent adhesion to damp or dry, recently placed or hardened concrete.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated quickly with Sika® resin-based finishing products.\u003c\/li\u003e\n  \u003cli\u003eFor interior and exterior use.\u003c\/li\u003e\n  \u003cli\u003eSolvent-free and can be applied manually or mechanically.\u003c\/li\u003e\n  \u003cli\u003eCE marking according to EN 1504 Parts 2 and 3 as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eEpoxy-modified cementitious mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003ePre-batched 21 kg set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003eComponent A : B : C = 1 : 2.5 : 14-15 by mass\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity of mix A+B+C\u003c\/td\u003e\n\u003ctd\u003e~2.00 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompressive strength\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;45 N\/mm² after 28 days at +20 °C and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -30 °C to +80 °C under continuous exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~2.0 kg\/m²\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLayer thickness\u003c\/td\u003e\n\u003ctd\u003e0.5-3 mm; up to 5 mm on small areas\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +8 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~80 min at +10 °C, ~40 min at +20 °C, ~20 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant Application Conditions\u003c\/h2\u003e\n\u003cp\u003eThe concrete substrate must be sound, with a minimum compressive strength of 25 N\/mm² and a minimum tensile strength of 1.5 N\/mm². The substrate may be damp, but must be free from puddles and contaminants such as oils, grease, old coatings or impregnations. When applying gas-tight coatings over Sikagard®-720 EpoCem®, check the substrate moisture and do not work on assumptions.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, the condition of the concrete, the measured moisture, the desired layer thickness and the coating that will be applied afterwards. This is important because Sikagard®-720 EpoCem® is often an intermediate technical layer and must be coordinated with the complete system.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard720\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Systems for Sikagard®-720 EpoCem®\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-720 EpoCem is a technical intermediate layer for pore sealing, levelling and preparation of concrete, including damp substrates without standing water. The next coating must be selected according to the moisture level, exposure and finish requirements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor protective coatings and systems, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor epoxy flooring systems after suitable preparation, see \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a primer in Sikafloor systems, compare with \u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":49284447961412,"sku":"92315","price":98.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-720EpoCem_-Epoksi-tsimentovraztvorzazapechatkanapori.webp?v=1726743223"},{"product_id":"sikacor-950-f-pokritie-za-stomana-i-beton-za-tezhak-rezhim-na-eksploatatsia","title":"SikaCor®-950 F - Epoxy Coating for Steel and Concrete Under Heavy-Duty Conditions","description":"\u003cp\u003e\u003cstrong\u003eSikaCor®-950 F\u003c\/strong\u003e is a durable 2-component, low-solvent epoxy coating for steel and concrete under heavy-duty service conditions. It is used for underground and underwater structures, hydraulic engineering works, tanks and water-retaining structures, including environments with wastewater, agriculture and the chemical industry.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose SikaCor 950 F?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaCor®-950 F when a protective coating for concrete or steel is required with high resistance to water, abrasion, impact and chemicals. It is a professional product for sites with aggressive service environments, including locations where application onto damp concrete is unavoidable.\u003c\/p\u003e\n\n\u003ch2\u003eMain Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2-component epoxy coating for steel and concrete.\u003c\/li\u003e\n  \u003cli\u003eHard after full curing.\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant and impact-resistant.\u003c\/li\u003e\n  \u003cli\u003eExcellent resistance to water and chemicals.\u003c\/li\u003e\n  \u003cli\u003eSuitable for underground and underwater structures.\u003c\/li\u003e\n  \u003cli\u003eCE marking as a coating for concrete protection in accordance with EN 1504-2, as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003e2-component coating based on epoxy resin and mineral fillers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, tinted red\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.9 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolids content\u003c\/td\u003e\n\u003ctd\u003e~75% by volume, ~88% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem on concrete\u003c\/td\u003e\n\u003ctd\u003e2-3 coats of SikaCor®-950 F; the first coat may be diluted with max. 5% Sika® Thinner S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem on steel\u003c\/td\u003e\n\u003ctd\u003e2-3 coats of SikaCor®-950 F; for high mechanical loads, SikaCor® Zinc R primer is recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio A:B\u003c\/td\u003e\n\u003ctd\u003e93:7 by weight; 100:14 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTheoretical consumption\u003c\/td\u003e\n\u003ctd\u003e~0.380 kg\/m² for 150 μm dry film thickness, without losses\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMinimum product and substrate temperature\u003c\/td\u003e\n\u003ctd\u003e+10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~1.5 hours at +20 °C; ~45 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChemical and Temperature Resistance\u003c\/h2\u003e\n\u003cp\u003eAccording to the TDS, the product is resistant to fresh, process, saline and seawater, domestic wastewater, faeces, diluted inorganic acids and salts, mineral oils and fuels, lubricating oils and detergents. It is not resistant to benzene hydrocarbons and tar oils. Dry heat resistance is up to approx. +100 °C, and hot water resistance is up to approx. +60 °C.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Limitations\u003c\/h2\u003e\n\u003cp\u003eSikaCor®-950 F is not suitable for surfaces in contact with drinking water. Direct exposure to water immediately after application should only be permitted in special cases and after consultation with environmental protection authorities, as solvents may temporarily contaminate the water.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify whether the substrate is concrete or steel, the service environment, contact with water\/wastewater, expected chemical exposure, desired system thickness and application conditions. With SikaCor®-950 F, the choice of system is more important than the individual product.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"35kg. \/ Black","offer_id":49284570644804,"sku":"640145","price":524.0,"currency_code":"EUR","in_stock":true},{"title":"35kg. \/ Red","offer_id":49284584767812,"sku":"639972","price":524.0,"currency_code":"EUR","in_stock":true},{"title":"Thinner S 5 kg. \/ N\/A","offer_id":54182716834116,"sku":"753259","price":54.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaCor_-950F_-Pokritiezastomanaibetonzatezhakrezhimnaeksploatatsia.webp?v=1726744221"},{"product_id":"sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka","title":"Sikafloor®-150 - Epoxy Primer for Concrete and Sika Flooring Systems","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-150\u003c\/strong\u003e is a 2-component epoxy primer for concrete, cementitious screeds and epoxy screeds. It is used as a primer for all Sika epoxy and polyurethane flooring systems, as well as a bonding bridge for levelling screeds and floor screeds.\u003c\/p\u003e\n\n\u003ch2\u003eWhen is Sikafloor 150 used?\u003c\/h2\u003e\n\u003cp\u003eThe product is suitable for normally to highly absorbent concrete and cementitious surfaces. It is selected when the substrate needs to be primed before an epoxy or polyurethane flooring system, for example in garages, warehouses, workshops, industrial floors, stone carpet systems or other Sikafloor solutions.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLow viscosity and good penetration into the substrate.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to concrete and cementitious surfaces.\u003c\/li\u003e\n  \u003cli\u003eEasy application and short waiting times.\u003c\/li\u003e\n  \u003cli\u003eLow odour.\u003c\/li\u003e\n  \u003cli\u003eMultipurpose product - primer, levelling mortar, screed or bonding bridge, depending on the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSikafloor 150 or Sikafloor 151?\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-150 is generally selected for normally to highly absorbent substrates. If the concrete has low to medium absorbency, \u003ca href=\"\/en\/products\/sikafloor-151-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-151\u003c\/a\u003e is often the more suitable alternative. The safest choice is made after assessing the porosity, moisture and the system that will be applied over it.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, the condition of the concrete, whether the substrate is new or old, how absorbent it is and what coating will be applied after the primer. This helps confirm whether Sikafloor®-150 is the correct epoxy primer for the specific flooring system.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikafloor150\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Sikafloor systems for Sikafloor®-150\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikafloor-150 is a primer and system preparatory layer. It is not a standalone final floor finish; it is selected according to the porosity of the concrete, moisture, expected load and the subsequent epoxy or polyurethane coating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor garages and car parks, see \u003ca href=\"\/en\/collections\/pokritia-nastilki-avtomobilni-parkingi-i-garzhi\"\u003eepoxy flooring for garages and car parks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a water-based epoxy coating under moderate load, compare with \u003ca href=\"\/en\/products\/sikafloor-2510-w-epoksidno-podovo-pokritie-na-vodna-osnova\"\u003eSikafloor®-2510 W\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a more wear-resistant epoxy coating, see \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"10kg.","offer_id":49284638277956,"sku":"871193","price":204.12,"currency_code":"EUR","in_stock":true},{"title":"25kg.","offer_id":49284638310724,"sku":"871178","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-150-Epoksidengrund_izravnitelenraztvorizamazka.webp?v=1726745160"},{"product_id":"sikafloor-169-epoksidno-svarzvashto-veshtestvo-za-raztvori-zamazki-i-zapechatvashti-pokritia","title":"Sikafloor®-169 - Transparent Epoxy Binder and Sealing Coat","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-169\u003c\/strong\u003e is a 2-component, low-viscosity, transparent epoxy binder and sealing coat. It is used in Sikafloor Decodur systems, with colored quartz sand, and for floors exposed to normal to heavy and very heavy mechanical loads.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor 169?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-169 when you need a \u003cstrong\u003etransparent epoxy resin for decorative or industrial flooring systems\u003c\/strong\u003e, rather than a colored finish coat. The product is used as a binder for mortars and screeds with colored quartz sand or as a transparent sealing layer in Sikafloor Decodur systems.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTransparent epoxy binder and sealer.\u003c\/li\u003e\n  \u003cli\u003eLow viscosity and multi-purpose application.\u003c\/li\u003e\n  \u003cli\u003eLow volatile organic compound (VOC) content.\u003c\/li\u003e\n  \u003cli\u003eLow degree of yellowing according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eGood mechanical and abrasion resistance.\u003c\/li\u003e\n  \u003cli\u003eCE marking to EN 13813 and EN 1504-2 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component transparent epoxy resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e10 kg A+B set\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing ratio\u003c\/td\u003e\n      \u003ctd\u003eComponent A : Component B = 75 : 25 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption as a sealer\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.15 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption as a wearing layer\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.7-2 kg\/m² depending on the system\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n      \u003ctd\u003eBelow 4% by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoot traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 12 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull cure\u003c\/td\u003e\n      \u003ctd\u003eApprox. 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhich systems is it suitable for?\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-169 is more specialized than a standard epoxy floor paint. It is used for Sikafloor Decodur systems with colored quartz sand, decorative seal coats and industrial floors with higher loading. If you are looking for a colored epoxy coating for a garage or workshop, a more suitable starting point may be \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e. If you need a matt PU sealer, see \u003ca href=\"\/en\/products\/sikafloor-304-w-poliuretanovo-matovo-zapechatvashto-pokritie-na-vodna-osnova\"\u003eSikafloor®-304 W\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify which system will be installed, whether colored quartz sand will be used, the area, the expected load and the condition of the substrate. This helps determine whether Sikafloor®-169 is the correct binder or whether another Sikafloor system is required.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"10kg.","offer_id":49284650369348,"sku":"174989","price":201.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-169-Epoksidnosvarzvashtoveshtestvozaraztvori_zamazkiizapechatvashtipokritia.jpg?v=1726745774"},{"product_id":"sikafloor-304-w-poliuretanovo-matovo-zapechatvashto-pokritie-na-vodna-osnova","title":"Sikafloor®-304 W - Matte Polyurethane Sealing Coat","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-304 W\u003c\/strong\u003e is a 2-component, water-based polyurethane matte sealing coat. It is used as a matte sealer in Sika ComfortFloor systems where low odour, low VOC content, UV resistance and easy cleaning are important.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikafloor 304 W?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-304 W when the flooring system requires a \u003cstrong\u003ematte polyurethane sealer\u003c\/strong\u003e instead of a gloss finish. The product is suitable for professionally installed Sika ComfortFloor systems and for projects where comfort, appearance and easy maintenance are more important than heavy industrial loading.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-based and practically odourless when applied according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eMatte finish after full drying.\u003c\/li\u003e\n  \u003cli\u003eGood UV resistance and resistance to yellowing.\u003c\/li\u003e\n  \u003cli\u003eEasy-to-clean surface.\u003c\/li\u003e\n  \u003cli\u003eLow VOC content; the TDS states VOC \u0026lt; 100 g\/l according to EPA Reference Test Method 24.\u003c\/li\u003e\n  \u003cli\u003eCE marking according to EN 13813 and EN 1504-2 as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component water-based polyurethane sealer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e7.5 kg set A+B\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.13 kg\/m²\/layer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing\u003c\/td\u003e\n      \u003ctd\u003eComponent A : Component B = 80 : 20 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003e+10 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFoot traffic\u003c\/td\u003e\n      \u003ctd\u003eApprox. 16 hours at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull curing\u003c\/td\u003e\n      \u003ctd\u003eApprox. 4 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere does this product perform best?\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-304 W performs best as the final matte coat in a specified Sika ComfortFloor system. It is not a universal varnish for every substrate. The substrate must be clean, dry and free from dust, grease, old coatings or impregnations. If you are working on a cementitious self-levelling floor such as \u003ca href=\"\/en\/products\/sikafloor-432-decocem-tsimentov-sastav-za-samorazlivni-podove-pri-visoko-natovarvane-3-30mm\"\u003eSikafloor®-432 DecoCem\u003c\/a\u003e, the choice of sealer must be made according to the expected load and the system data sheet.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send details of the system on which the product will be applied, the area, the desired finish and the working conditions. This allows confirmation of whether Sikafloor®-304 W is the correct matte sealer or whether a more resistant industrial solution is required.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"7.5kg","offer_id":49285573017924,"sku":"717762","price":210.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-304W-Poliuretanovo_matovozapechatvashtopokritienavodnaosnova.webp?v=1726756457"},{"product_id":"sikafloor-3-quartztop-mineralen-povarhnosten-vtvarditel-za-podove","title":"Sikafloor®-3 QuartzTop - Mineral Surface Hardener for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-3 QuartzTop\u003c\/strong\u003e is a 1-component mineral dry shake for power-floated concrete, made with specially selected quartz mineral aggregates, cement, additives and pigments. It is used to create a wear-resistant surface layer on monolithic concrete floors in warehouses, factories, workshops, shopping centres and public spaces.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor 3 QuartzTop?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-3 QuartzTop when a fresh concrete floor requires a stronger, easier-to-maintain and more wear-resistant surface than standard concrete without a dry shake. It is an economical mineral dry shake for professional application on fresh concrete.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWear-resistant surface layer for monolithic concrete floors.\u003c\/li\u003e\n  \u003cli\u003eImpact resistance and longer service life compared with concrete without a dry shake.\u003c\/li\u003e\n  \u003cli\u003eDoes not release dust when correctly installed and maintained.\u003c\/li\u003e\n  \u003cli\u003eFast application onto fresh concrete.\u003c\/li\u003e\n  \u003cli\u003eEasy cleaning and maintenance.\u003c\/li\u003e\n  \u003cli\u003eIncreases resistance to oils and contamination.\u003c\/li\u003e\n  \u003cli\u003eHigh-quality factory-mixed product.\u003c\/li\u003e\n  \u003cli\u003eCE marked as cementitious screed CT-C70-F7-AR1.0 according to EN 13813, as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eNatural mineral aggregates with cement, additives and pigments\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eNatural, concrete grey; other colours on request\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~2250 kg\/m³ after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAbrasion resistance\u003c\/td\u003e\n\u003ctd\u003eClass AR1.0 according to EN 13892-4, BCA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~3-5 kg\/m², depending on the application method and concrete mix\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e~2.5-3.0 mm at the recommended consumption of ~5.0 kg\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003eFrom 30% to 98%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoot traffic\u003c\/td\u003e\n\u003ctd\u003e~18 h at +10 °C, ~12 h at +20 °C, ~8 h at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication and system products\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-3 QuartzTop is broadcast onto fresh concrete and finished with a power trowel. For optimal results, the concrete must be of consistent quality, have a suitable water\/cement ratio and a minimum strength of 25 N\/mm². After finishing, the surface is protected with a suitable impregnating sealer such as Sikafloor® ProSeal or Sikafloor® ProSeal-22, as stated in the TDS.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the floor area, floor loading, application conditions, colour and whether the application will be manual or machine-applied. If you need higher abrasion resistance and a heavier-duty solution, compare with Sikafloor®-2 SynTop.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"25 kg. natural","offer_id":49289779544388,"sku":"671971","price":11.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-3QuartzTop-Mineralenpovarhnostenvtvarditelzapodove.webp?v=1726830131"},{"product_id":"sikafloor-2-syntop-nemetalen-povarhnosten-vtvarditel-za-betonni-podove","title":"Sikafloor®-2 SynTop - Non-Metallic Hardener for Concrete Floors","description":"\u003cp\u003e\u003cstrong\u003eSikafloor®-2 SynTop\u003c\/strong\u003e is a 1-component, factory-produced, non-metallic synthetic dry-shake hardener for concrete floors, containing cement, hard aggregates, compatible additives and pigment. When broadcast and power-trowelled onto fresh concrete, it forms a very wear-resistant, smooth surface for warehouses, factories, workshops, hangars, supermarkets, offices and museums.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikafloor 2 SynTop?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikafloor®-2 SynTop when the concrete floor will be exposed to higher wear, impact loads or intensive service. Compared with a standard mineral dry shake, SynTop is intended for higher abrasion resistance and more demanding industrial conditions.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVery high wear resistance.\u003c\/li\u003e\n  \u003cli\u003eHigh impact resistance.\u003c\/li\u003e\n  \u003cli\u003eLonger service life compared with concrete without a dry-shake hardener.\u003c\/li\u003e\n  \u003cli\u003eDoes not require special maintenance when correctly installed.\u003c\/li\u003e\n  \u003cli\u003eCan provide an anti-slip surface.\u003c\/li\u003e\n  \u003cli\u003eDust-free.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance to oils and contamination.\u003c\/li\u003e\n  \u003cli\u003eCE marked as cementitious screed CT-C70-F7-AR0.5 according to EN 13813, as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003eNatural and synthetic aggregates, cement, additives and pigments\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg bags\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eNatural, concrete grey; other colours on request\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum grain size\u003c\/td\u003e\n\u003ctd\u003eDmax 2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAbrasion resistance\u003c\/td\u003e\n\u003ctd\u003eClass AR0.5 according to EN 13892-4, BCA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompressive strength\u003c\/td\u003e\n\u003ctd\u003e≥70 MPa after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFlexural tensile strength\u003c\/td\u003e\n\u003ctd\u003e≥7.0 MPa after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eReaction to fire\u003c\/td\u003e\n\u003ctd\u003eA1fl according to EN 13501-1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~3-5 kg\/m² depending on application method and concrete mix design\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e~2.5-3.0 mm at the recommended consumption rate of ~5.0 kg\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoot traffic\u003c\/td\u003e\n\u003ctd\u003e~18 h at +10 °C, ~12 h at +20 °C, ~8 h at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication and limitations\u003c\/h2\u003e\n\u003cp\u003eSikafloor®-2 SynTop is applied to fresh concrete manually or mechanically and finished by power trowelling. Do not add water to the surface where the dry shake has been applied. Do not use concrete with partial cement replacement by fly ash, as the mix becomes sticky and difficult to finish. The exact timing of broadcasting and the finishing sequence are critical for an even finish.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the floor area, expected loading, colour requirements, whether an anti-slip effect is required and the intended application method. For lighter service conditions, Sikafloor®-3 QuartzTop may be sufficient; for heavier loading, SynTop is the stronger choice.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"25 kg. \/ Red","offer_id":49289786327364,"sku":null,"price":16.23,"currency_code":"EUR","in_stock":false},{"title":"25 kg. \/ Green","offer_id":49289799991620,"sku":null,"price":19.68,"currency_code":"EUR","in_stock":false},{"title":"25 kg. \/ Natural CZ synthetic topping","offer_id":49289800024388,"sku":"405027","price":17.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_-2SynTop-Nemetalenpovarhnostenvtvarditelzabetonnipodove.webp?v=1726830535"},{"product_id":"sikafloor-proseal-12-akrilaten-sastav-za-impregnirane-i-zapechatka-na-betonni-povarhnosti","title":"Sikafloor® ProSeal-12 – Concrete Impregnator and Sealer","description":"\u003cp\u003e\u003cstrong\u003eSikafloor® ProSeal-12\u003c\/strong\u003e is an acrylate formulation for \u003cstrong\u003eimpregnating and sealing concrete\u003c\/strong\u003e. It is used on fresh or already hardened concrete when the aim is to make the surface more resistant to wear, reduce dusting, and lower absorption of oils and contaminants.\u003c\/p\u003e\n\n\u003cp\u003eThe product is suitable for concrete floors and structures in garages, warehouses, work areas, auto repair shops, car parks, and other areas where untreated concrete dusts, becomes dirty easily, or requires more economical protection without installing a full epoxy flooring system.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikafloor® ProSeal-12?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor fresh concrete\u003c\/strong\u003e - when sealing is required after surface finishing to support proper drying and reduce rapid water loss.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor old or hardened concrete\u003c\/strong\u003e - when the floor dusts, absorbs contaminants, and needs surface strengthening and easier maintenance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor garages, warehouses, and workshops\u003c\/strong\u003e - when a practical concrete sealer is required instead of a thicker resin system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor industrial and commercial areas\u003c\/strong\u003e - when the objective is improved wear resistance and lower surface absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat does it do, and what does it not do?\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eEffect\u003c\/th\u003e\n      \u003cth\u003eWhat it means in practice\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduces dusting\u003c\/td\u003e\n      \u003ctd\u003eSuitable for concrete surfaces that release dust during traffic, cleaning, or service.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eImproves wear resistance\u003c\/td\u003e\n      \u003ctd\u003eHelps create a stronger surface layer, but does not replace a full epoxy system under heavy-duty loads.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduces absorption\u003c\/td\u003e\n      \u003ctd\u003eImproves resistance to oils and contaminants, but should not be regarded as a deep water-repellent facade impregnation treatment.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEconomical protection\u003c\/td\u003e\n      \u003ctd\u003eA good choice when the aim is to seal concrete, not to create a decorative or thick-layer floor finish.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eProSeal-12 or another concrete impregnator?\u003c\/h2\u003e\n\u003cp\u003eIf you need a \u003ca href=\"\/en\/collections\/%D0%B8%D0%BC%D0%BF%D1%80%D0%B5%D0%B3%D0%BD%D0%B8%D1%80%D0%B0%D0%BD%D0%B5-%D0%B8-%D0%B7%D0%B0%D0%BF%D0%B5%D1%87%D0%B0%D1%82%D0%B2%D0%B0%D0%BD%D0%B5-%D0%BD%D0%B0-%D0%B1%D0%B5%D1%82%D0%BE%D0%BD\"\u003econcrete impregnator\u003c\/a\u003e for floors that dust and absorb liquids, Sikafloor® ProSeal-12 is a logical choice. If the main objective is water repellency on cementitious surfaces or facades, see \u003ca href=\"\/en\/products\/sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi\"\u003eSikagard®-700 S\u003c\/a\u003e. If the floor will be exposed to more serious loads, tyre traffic, or chemical exposure, consider \u003ca href=\"\/en\/collections\/epoksidni-podovi-sistemi\"\u003eepoxy flooring systems\u003c\/a\u003e or \u003ca href=\"\/en\/products\/sikafloor-2510-w-epoksidno-podovo-pokritie-na-vodna-osnova\"\u003eSikafloor®-2510 W\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eApplication and preparation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOn fresh concrete, apply after the surface finishing work has been completed.\u003c\/li\u003e\n  \u003cli\u003eOn old concrete, all dust, loose material, oils, and contaminants must be removed before application.\u003c\/li\u003e\n  \u003cli\u003eIt may be applied with a low-pressure sprayer, brush, or roller, depending on site conditions and the product data sheet.\u003c\/li\u003e\n  \u003cli\u003eIf there is any doubt about compatibility, absorption, or appearance, first carry out a test area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackaging and selection\u003c\/h2\u003e\n\u003cp\u003eAvailable packaging: \u003cstrong\u003e5 l, 15 l, and 200 l\u003c\/strong\u003e. For accurate selection, send the area in square metres, photos of the concrete, information on whether it is fresh or old, and how the area will be used. This makes it possible to assess whether ProSeal-12 is sufficient, or whether it is better to choose a system for a \u003ca href=\"\/en\/collections\/pokritia-nastilki-avtomobilni-parkingi-i-garzhi\"\u003egarage or car park\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/podovi-pokritia-za-avtoservizi-i-rabotilnitsi\"\u003eauto repair shop\u003c\/a\u003e, or \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective concrete coating\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5 l.","offer_id":49289849176388,"sku":"422871","price":59.0,"currency_code":"EUR","in_stock":true},{"title":"15 l.","offer_id":49289855795524,"sku":"405149","price":137.0,"currency_code":"EUR","in_stock":true},{"title":"200 l.","offer_id":49289855828292,"sku":"405151","price":1482.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_ProSeal-12-Akrilatensastavzaimpregniraneizapechatkanabetonnipovarhnosti.webp?v=1726830817"},{"product_id":"sika-blackseal-bt-uplatnitel-i-lepilo-na-osnovata-na-butil-kauchuk","title":"Sika BlackSeal® BT - Butyl Rubber Sealant and Adhesive","description":"\u003cp\u003e\u003cstrong\u003eSika BlackSeal® BT\u003c\/strong\u003e is a 1-component butyl rubber sealant and adhesive for external sealing, bonding and repair of roofs, walls and other building elements. It is suitable where a black sealant with good adhesion to various construction materials is required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika BlackSeal BT?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika BlackSeal® BT for local sealing, bonding and repair of roof and façade details where the substrate is a construction substrate, sound and suitably prepared. The product is practical for openings, cracks and assemblies because the high-solids formula fills without shrinkage according to the TDS.\u003c\/p\u003e\n\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component butyl rubber sealant and adhesive.\u003c\/li\u003e\n  \u003cli\u003eAdheres to various construction materials.\u003c\/li\u003e\n  \u003cli\u003eDoes not require a primer according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eCan be applied on damp surfaces.\u003c\/li\u003e\n  \u003cli\u003eEasy to use with a cartridge gun.\u003c\/li\u003e\n  \u003cli\u003eHigh solids content for good filling of openings and cracks without shrinkage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eButyl rubber-based sealant and adhesive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e300 ml cartridge, 12 cartridges per box\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eBlack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.80 kg\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSolids content\u003c\/td\u003e\n      \u003ctd\u003eApprox. 85%\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eService temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom -20 °C to +70 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C, minimum 3 °C above the dew point\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTack-free time\u003c\/td\u003e\n      \u003ctd\u003eApprox. 25 minutes\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. When sealing assemblies, apply a sufficient amount of Sika BlackSeal® BT, press the surfaces together while the material is still tacky and leave an approx. 2 mm film of sealant.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSika BlackSeal® BT cannot be painted.\u003c\/li\u003e\n  \u003cli\u003eDo not use for underwater joints, glazing, swimming pools or natural stone.\u003c\/li\u003e\n  \u003cli\u003eDo not apply in direct contact with other sealants or adhesives without a compatibility test.\u003c\/li\u003e\n  \u003cli\u003eA compatibility test must be carried out before use on plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend details of the element to be sealed, the materials on both sides, whether moisture is present, whether it will be painted and whether there is permanent contact with water. This helps confirm whether BlackSeal® BT is the right choice or whether another Sikaflex \/ SikaSeal product is needed.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"300 ml x 12pcs. \/ Black","offer_id":54160948396356,"sku":"469395","price":54.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaBlackSealBT-Uplatnitelilepilonaosnovatanabutil-kauchuk.webp?v=1738142261"},{"product_id":"sikabond-115-strong-fix-momentno-lepilo-za-vatreshno-prilozhenie","title":"SikaBond®-115 Strong Fix - Interior Mounting Adhesive","description":"\u003cp\u003e\u003cstrong\u003eSikaBond®-115 Strong Fix\u003c\/strong\u003e is a 1-component construction mounting adhesive with high final strength for interior and protected exterior use. It is suitable for skirting boards, frames, battens, mouldings, panels, ceramic tiles, anodised aluminium, polystyrene cornices and other lightweight construction components.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose SikaBond-115 Strong Fix?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaBond®-115 Strong Fix when you need an easy-to-apply mounting adhesive for interior finishing works and at least one of the substrates is porous. The product is based on an acrylate dispersion, is easy to clean before curing and develops high final strength.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component construction adhesive, ready to use.\u003c\/li\u003e\n  \u003cli\u003eHigh final strength.\u003c\/li\u003e\n  \u003cli\u003eRapid strength build-up.\u003c\/li\u003e\n  \u003cli\u003eEasy application and easy cleaning.\u003c\/li\u003e\n  \u003cli\u003eSuitable for concrete, mortars, fibre cement, wood and painted substrates.\u003c\/li\u003e\n  \u003cli\u003eVery low emissions: GEV-EMICODE EC 1PLUS according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylate dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e290 ml cartridge, 12 pieces per box\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.40 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e~6.0 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -15 °C to +60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCoverage from 1 cartridge\u003c\/td\u003e\n\u003ctd\u003e~100 dots or ~15 m bead with a 5 mm nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +35 °C for air and substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCuring rate\u003c\/td\u003e\n\u003ctd\u003e~6 mm\/24 h at +23 °C and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSkin formation time\u003c\/td\u003e\n\u003ctd\u003e~30 min\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eFor heavy components, use mechanical fixing or temporary support until fully cured. Do not use SikaBond®-115 Strong Fix for structural bonding, bonding glass where the adhesive zone is exposed to sunlight, on PE, PP, PTFE\/Teflon, bituminous substrates, natural rubber, EPDM or materials that release oils, plasticisers or solvents.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend us details of what will be bonded, the substrate, whether the application is interior or protected exterior, and whether the element is heavy. This allows confirmation of whether SikaBond®-115 Strong Fix is sufficient or whether a more elastic \/ higher-class Sikaflex or SikaBond product is required.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"290 ml x 12pcs. \/ White","offer_id":54160949477700,"sku":"711150","price":59.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaBond-115StrongFix-Momentnolepilozavatreshnoprilozhenie.webp?v=1738142886"},{"product_id":"sikaflex-118-extreme-grab-stroitelno-lepilo","title":"Sikaflex®-118 Extreme Grab - high initial tack construction adhesive","description":"\u003cp\u003e\u003cstrong\u003eSikaflex®-118 Extreme Grab\u003c\/strong\u003e is a 1-component construction adhesive with very high initial tack for indoor and outdoor use. It is suitable for bonding to concrete, masonry, stone, ceramic, wood, metals, glass and mirrors when strong initial fixing is required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikaflex-118 Extreme Grab be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikaflex®-118 Extreme Grab when you need an installation adhesive for heavier elements and want high initial tack without additional support under normal conditions. The product is based on a silane-crosslinked polymer, contains no phthalates and provides a strong, elastic bond.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVery high initial tack.\u003c\/li\u003e\n  \u003cli\u003eFixing of heavy objects without additional support according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eStrong and elastic bonding.\u003c\/li\u003e\n  \u003cli\u003eIndoor and outdoor use.\u003c\/li\u003e\n  \u003cli\u003eSuitable for concrete, masonry, stone, ceramic, wood, metals, glass and mirrors.\u003c\/li\u003e\n  \u003cli\u003eVery low emissions: EMICODE EC 1PLUS according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eSilane-crosslinked polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e290 ml cartridge, 12 units per box\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.40 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e~2.2 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e~350%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -40 °C to +80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCoverage from 1 cartridge\u003c\/td\u003e\n\u003ctd\u003e~100 dots or ~5 m V-shaped bead; higher consumption may be required for heavy objects\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +40 °C for air and substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSkin formation time\u003c\/td\u003e\n\u003ctd\u003e~15 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFull final strength\u003c\/td\u003e\n\u003ctd\u003eAfter 24-48 h at +23 °C, depending on conditions and thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, dry, sound and free from dust, oils, grease, cement laitance and weak coatings. Do not use for structural bonding, on bitumen, natural rubber, EPDM, PE, PP, PTFE\/Teflon, or for bonding glass where the bond line is exposed to sunlight.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend details of the element material, substrate, approximate weight, whether the application is indoor or outdoor, and whether the bond line will be exposed to UV. This will help confirm whether Sikaflex®-118 Extreme Grab is the right choice.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"290 ml x 12pcs. \/ White","offer_id":54160977494340,"sku":"562411","price":88.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikaflex-118ExtremeGrab-Stroitelnolepilo.webp?v=1738143597"},{"product_id":"sikaflex-112-crystal-clear-prozrachno-lepilo-i-uplatnitel","title":"Sikaflex®-112 Crystal Clear - Transparent Adhesive and Sealant","description":"\u003cp\u003e\u003cstrong\u003eSikaflex®-112 Crystal Clear\u003c\/strong\u003e is a 100% transparent 1-component adhesive and sealant for interior and exterior use. It is suitable for bonding and sealing around bonded components on concrete, masonry, stone, ceramics, wood, metals, glass and PVC where visible transparency is important.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikaflex-112 Crystal Clear?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikaflex®-112 Crystal Clear when you need a transparent adhesive-sealant and do not want a visible white, grey or black joint. The product is based on a silane-crosslinked polymer, has good initial tack and can be used for bonding and for sealing around bonded components.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e100% transparent colour.\u003c\/li\u003e\n  \u003cli\u003eAdhesive and sealant in one product.\u003c\/li\u003e\n  \u003cli\u003eGood initial tack.\u003c\/li\u003e\n  \u003cli\u003eSuitable for concrete, masonry, stone, ceramics, wood, metals, glass and PVC.\u003c\/li\u003e\n  \u003cli\u003eCE marking according to EN 15651-1, class F EXT-INT 20HM according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eVery low emissions: GEV-EMICODE EC 1PLUS according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eSilane-crosslinked polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e290 ml cartridge, 12 units per box\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eTransparent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.05 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e~2.5 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e~400%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -40 °C to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eJoint design\u003c\/td\u003e\n\u003ctd\u003e6-20 mm width, width:depth ratio 2:1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eYield from 1 cartridge\u003c\/td\u003e\n\u003ctd\u003e~100 dots or ~15 m bead with a 5 mm nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSkin formation time\u003c\/td\u003e\n\u003ctd\u003e~30 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFinal bonding strength\u003c\/td\u003e\n\u003ctd\u003eAfter 24-48 h at +23 °C, depending on conditions and thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eDo not use Sikaflex®-112 Crystal Clear for joints exposed to water pressure or permanent contact with water, for seals in or around swimming pools, for floor and sanitary joints, for structural bonding or for bonding glass where the adhesive area is exposed to sunlight.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend details of the materials to be bonded, whether the joint will remain visible, whether water\/UV exposure is present, and whether the product will be used as an adhesive, a sealant or both. This is important because transparency is not a substitute for selecting the correct product for sanitary, floor or water-pressure joints.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"290 ml x 12 pcs. \/ Transparent","offer_id":54160986308932,"sku":"571429","price":97.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikaflex-112CrystalClear-Prozrachnolepiloiuplatnitel.webp?v=1738143852"},{"product_id":"sikaflex-11-fc-purform-mnogofunktsionalno-elastichno-lepilo-i-fugouplatnitel","title":"Sikaflex®-11 FC Purform® - Elastic Adhesive and Joint Sealant","description":"\u003cp\u003e\u003cstrong\u003eSikaflex®-11 FC Purform®\u003c\/strong\u003e is a multifunctional 1-component elastic adhesive and joint sealant for interior and exterior use. It is suitable for bonding concrete, masonry, decorative stone, ceramics, wood, metals and glass, as well as for vertical and horizontal joints.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikaflex-11 FC Purform?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikaflex®-11 FC Purform® when you need a versatile Sikaflex for both elastic bonding and sealing. It has a wider range of applications than specialized transparent or high-grab adhesives and is suitable for façade, sanitary and pedestrian joints according to the CE classifications in the TDS.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAdhesive and joint sealant in one product.\u003c\/li\u003e\n  \u003cli\u003eMovement capability ±25%.\u003c\/li\u003e\n  \u003cli\u003eNon-sag and easy to apply.\u003c\/li\u003e\n  \u003cli\u003eGood mechanical resistance and weather resistance.\u003c\/li\u003e\n  \u003cli\u003eBonds well to most construction materials.\u003c\/li\u003e\n  \u003cli\u003ePurform® polyurethane with very low monomer content; no diisocyanate training is required according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eCE marking according to EN 15651-1, EN 15651-3 and EN 15651-4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guide values from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eSika® Purform® polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e300 ml cartridge, 300 ml foil pack, 600 ml foil pack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eWhite, black, grey, brown\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.35 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e~1.8 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e~800%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElastic recovery\u003c\/td\u003e\n\u003ctd\u003e~85%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMovement capability\u003c\/td\u003e\n\u003ctd\u003e±25%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -40 °C to +80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\u003ctd\u003e10-35 mm according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCuring rate\u003c\/td\u003e\n\u003ctd\u003e~4.0 mm\/24 h at +23 °C and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSkin formation time\u003c\/td\u003e\n\u003ctd\u003e~50 min\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant for correct use\u003c\/h2\u003e\n\u003cp\u003eJoints must be correctly designed and sized according to the movement, width, depth and site conditions. For sealing, use a suitable closed-cell polyethylene foam backing rod. For critical substrates and demanding service requirements, follow the Sika system recommendations for primer\/activator.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide whether the product will be used for bonding or for a joint, the joint width and depth, the materials on both sides, and whether the application is interior, exterior, façade, sanitary or floor. This allows the correct choice between Sikaflex®-11 FC Purform®, Sikaflex® PRO-3 Purform® or a more specialized product.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"300 ml x 12pcs. \/ White","offer_id":54161018585412,"sku":"689690","price":97.2,"currency_code":"EUR","in_stock":true},{"title":"300 ml x 12pcs. \/ Gray","offer_id":54161018618180,"sku":"689691","price":97.2,"currency_code":"EUR","in_stock":true},{"title":"300 ml x 12pcs. \/ Black","offer_id":54161018650948,"sku":"689643","price":97.2,"currency_code":"EUR","in_stock":true},{"title":"300 ml x 12pcs. \/ Brown","offer_id":54161018683716,"sku":"689644","price":97.2,"currency_code":"EUR","in_stock":true},{"title":"600 ml x 20pcs. \/ White","offer_id":54161018716484,"sku":"693973","price":228.96,"currency_code":"EUR","in_stock":true},{"title":"600 ml x 20pcs. \/ Gray","offer_id":54161018749252,"sku":"693947","price":228.96,"currency_code":"EUR","in_stock":true},{"title":"600 ml x 20pcs. \/ Black","offer_id":54161018782020,"sku":"693822","price":228.96,"currency_code":"EUR","in_stock":true},{"title":"600 ml x 20pcs. \/ Brown","offer_id":54161018814788,"sku":"644643","price":228.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikaflex-11FCPurform-Mnogofunktsionalnoelastichnolepiloifugouplatnitel.webp?v=1738144048"},{"product_id":"sikaflex-construction-uplatnitel-za-fasadi-ot-beton-i-zidaria","title":"Sikaflex® Construction+ - Elastic Sealant for Facade Joints","description":"\u003cp\u003e\u003cstrong\u003eSikaflex® Construction+\u003c\/strong\u003e is a 1-component, elastic polyurethane joint sealant for facade movement and connection joints in concrete and masonry. It cures with atmospheric moisture and is intended for exterior and interior facade joints requiring high weather resistance.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikaflex Construction+?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikaflex® Construction+ when facade joints between concrete or masonry elements need to be sealed and the joint must accommodate movement while remaining elastic. This product is not intended for swimming pools, permanent contact with water, or bituminous substrates.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component elastic joint sealant based on i-Cure® polyurethane technology.\u003c\/li\u003e\n  \u003cli\u003eVery good weather resistance.\u003c\/li\u003e\n  \u003cli\u003eMovement capability ±35% according to ASTM C 719 and ±25% according to BDS EN ISO 9047.\u003c\/li\u003e\n  \u003cli\u003eCures without bubble formation.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to many different substrates.\u003c\/li\u003e\n  \u003cli\u003eSolvent-free and with very low emissions according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eElastic polyurethane joint sealant\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e600 ml foil pack, 20 pieces per box\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eGrey; other colours on request\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.45 kg\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eService temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom -40 °C to +70 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eJoint width\u003c\/td\u003e\n      \u003ctd\u003e10-50 mm, with a design width:depth ratio of 2:1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoverage from 600 ml\u003c\/td\u003e\n      \u003ctd\u003eApprox. 6 m at 10 x 10 mm; 3 m at 20 x 10 mm; 1.3 m at 30 x 15 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCuring rate\u003c\/td\u003e\n      \u003ctd\u003eApprox. 3 mm\/24 h at +23 °C and 50% relative humidity\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSkin formation time\u003c\/td\u003e\n      \u003ctd\u003eApprox. 65 minutes at +23 °C and 50% relative humidity\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eJoint system\u003c\/h2\u003e\n\u003cp\u003eFor correct joint geometry, the TDS recommends a closed-cell polyethylene foam backing rod, such as \u003ca href=\"\/en\/products\/sika-rundschnur-pe-popalvasht-profil-ot-polietilenova-pyana-za-zapalvane-na-fugi\"\u003eSika® Rundschnur PE\u003c\/a\u003e. On porous substrates such as concrete, aerated concrete, cement renders, screeds and bricks, use \u003ca href=\"\/en\/products\/sika-primer-3-n-grund-za-poryozni-osnovi-i-metali-sadarzhasht-raztvoriteli\"\u003eSika® Primer-3 N\u003c\/a\u003e for critical applications and high adhesion requirements.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use on natural stone.\u003c\/li\u003e\n  \u003cli\u003eDo not use on bituminous substrates, natural rubber, EPDM, or materials that release oils, plasticizers or solvents.\u003c\/li\u003e\n  \u003cli\u003eDo not use for seals in or around swimming pools.\u003c\/li\u003e\n  \u003cli\u003eDo not use for joints subject to water pressure or permanent contact with water.\u003c\/li\u003e\n  \u003cli\u003eOverpainting is possible only after a compatibility test with the specific paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the joint width, depth and length, substrate type, whether the joint is on a facade, whether movement is expected, and whether it will be painted. This allows the consumption to be calculated and the appropriate primer and backing profile to be selected.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"600 ml x 20pcs. \/ Gray","offer_id":54161020223812,"sku":"747660","price":179.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaflexConstruction-Uplatnitelzafasadiotbetonizidaria.webp?v=1738144596"},{"product_id":"sikaflex-pro-3-purform-poliuretanov-uplatnitel-za-podovi-nastilki-i-inzhenerni-prilozhenia","title":"Sikaflex® PRO-3 Purform® - Polyurethane Sealant for Floor Joints","description":"\u003cp\u003e\u003cstrong\u003eSikaflex® PRO-3 Purform®\u003c\/strong\u003e is a 1-component polyurethane sealant for flooring and engineering applications. It is suitable for joints in warehouses, production areas, cleanrooms, the food and beverage industry, wastewater treatment plants, tunnels, car parks, pedestrian areas and traffic areas.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikaflex PRO-3 Purform be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikaflex® PRO-3 Purform® when the joint is exposed to mechanical loads, chemical effects or external weather conditions. It is the more engineering-grade choice compared with the universal Sikaflex®-11 FC Purform®, especially for floor joints, car parks, industrial spaces and infrastructure applications.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh movement capability: ±25% according to ISO 11600 and ±50% according to ASTM C920 as stated in the TDS.\u003c\/li\u003e\n  \u003cli\u003eHigh mechanical and chemical resistance.\u003c\/li\u003e\n  \u003cli\u003eHigh weathering resistance.\u003c\/li\u003e\n  \u003cli\u003eRapid development of mechanical properties.\u003c\/li\u003e\n  \u003cli\u003eCures without bubbles.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to most construction materials.\u003c\/li\u003e\n  \u003cli\u003ePurform® technology with very low monomer content.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003ePurform® polyurethane technology\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e300 ml cartridge and 600 ml foil pack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.30 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct declaration\u003c\/td\u003e\n\u003ctd\u003eEN 15651-4: PW EXT-INT CC 25 HM; EN 14188-2: Class 35\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElastic recovery\u003c\/td\u003e\n\u003ctd\u003e~90%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e~800%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMovement capability\u003c\/td\u003e\n\u003ctd\u003e±25% ISO 9047; ±35% EN 14188-2; ±50% ASTM C719\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -40 °C to +80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eJoint width\u003c\/td\u003e\n\u003ctd\u003e10-40 mm according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCuring rate\u003c\/td\u003e\n\u003ctd\u003e~3.5 mm\/24 h at +23 °C and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSkin formation time\u003c\/td\u003e\n\u003ctd\u003e~50 min\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant for joint design\u003c\/h2\u003e\n\u003cp\u003eJoint dimensions must be designed according to the movement capability of the sealant, the type of structure, the materials and the service load. For floor joints, the TDS requires a width-to-depth ratio of 1:0.8, except for specific project exceptions.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the joint width and depth, length in linear metres, type of load, whether there is chemical contact, and whether the application is interior or exterior. This allows the actual consumption to be calculated and confirms whether Sikaflex® PRO-3 Purform® is the correct class.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"600 ml x 20pcs. \/ Dark gray","offer_id":54161046077764,"sku":"693942","price":239.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikaflex_PRO-3_Purform_-_Poliuretanov_uplatnitel_za_podovi_nastilki_i_inzhenerni_prilozhenia_copy.webp?v=1738303873"},{"product_id":"sikaflex-pro-3-sl-visokokachestven-samorazliven-uplatnitel-za-podovi-nastilki-i-inzhenerni-prilozhenia","title":"Sikaflex® PRO-3 SL - Self-Leveling Sealant for Floor Joints","description":"\u003cp\u003e\u003cstrong\u003eSikaflex® PRO-3 SL\u003c\/strong\u003e is a high-quality, self-leveling elastic joint sealant for horizontal floor and civil engineering joints. It is suitable for pedestrian areas, car parks, garages, warehouses, production areas, the food industry, public buildings and tunnel construction.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikaflex PRO-3 SL be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikaflex® PRO-3 SL when the joint is horizontal and must withstand mechanical loads, vehicle traffic or chemical exposure. The product is self-leveling and is suitable for slopes up to 3%, but must not be used on steeper slopes.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-leveling 1-component elastic joint sealant.\u003c\/li\u003e\n  \u003cli\u003eMovement capability ±35% to ASTM C 719 and ±25% to BDS EN ISO 9047.\u003c\/li\u003e\n  \u003cli\u003eVery high mechanical and chemical resistance.\u003c\/li\u003e\n  \u003cli\u003eResistant to water, seawater, diluted alkalis, cleaning agents, petrol and diesel fuel according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to most construction materials.\u003c\/li\u003e\n  \u003cli\u003eSolvent-free with very low emissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guide values from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eSelf-leveling elastic polyurethane joint sealant\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e600 ml foil pack; industrial packaging is also available according to the TDS\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eConcrete grey; other colours on request\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.40 kg\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eService temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom -40 °C to +70 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eJoint width\u003c\/td\u003e\n      \u003ctd\u003e10-35 mm, with a design width:depth ratio of 1:0.8\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoverage from 600 ml\u003c\/td\u003e\n      \u003ctd\u003eApprox. 6 m at 10 x 10 mm; 1.9 m at 20 x 16 mm; 0.8 m at 30 x 24 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCuring rate\u003c\/td\u003e\n      \u003ctd\u003eApprox. 3.5 mm\/24 h at +23 °C and 50% relative humidity\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSkin time\u003c\/td\u003e\n      \u003ctd\u003eApprox. 100 minutes at +23 °C and 50% relative humidity\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFloor joint system\u003c\/h2\u003e\n\u003cp\u003eFor correct depth and consumption control, use a closed-cell polyethylene foam backer rod, such as \u003ca href=\"\/en\/products\/sika-rundschnur-pe-popalvasht-profil-ot-polietilenova-pyana-za-zapalvane-na-fugi\"\u003eSika® Rundschnur PE\u003c\/a\u003e. For porous substrates and critical applications, the TDS specifies priming with \u003ca href=\"\/en\/products\/sika-primer-3-n-grund-za-poryozni-osnovi-i-metali-sadarzhasht-raztvoriteli\"\u003eSika® Primer-3 N\u003c\/a\u003e after proper substrate preparation.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use on slopes greater than 3%.\u003c\/li\u003e\n  \u003cli\u003eDo not use on natural stone, glass, bituminous substrates, natural rubber or EPDM.\u003c\/li\u003e\n  \u003cli\u003eDo not use for seals in or around swimming pools.\u003c\/li\u003e\n  \u003cli\u003eNot resistant to alcohols, organic acids, concentrated alkalis and acids, or hydrocarbons.\u003c\/li\u003e\n  \u003cli\u003eDo not expose uncured material to products containing alcohol.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the width, depth and length of the floor joints, the type of load, and whether there will be vehicle traffic, chemicals or a slope. This determines whether PRO-3 SL is the correct product and how many packs are required.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"600 ml x 20 pcs. \/ Gray","offer_id":54161086644548,"sku":"694214","price":239.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikaflex_PRO-3SL-Visokokachestven_samorazlivenuplatnitelzapodovinastilkiiinzhenerniprilozhenia.webp?v=1738145149"},{"product_id":"sikaflex-at-connection-universalen-uplatnitel-za-saedinitelni-fugi","title":"Sikaflex® AT Connection - Universal Sealant for Connection Joints","description":"\u003cp\u003e\u003cstrong\u003eSikaflex® AT Connection\u003c\/strong\u003e is a universal 1-component elastic joint sealant for connection joints between porous and non-porous substrates. It is suitable for windows, doors and other building elements where elastic sealing with good adhesion and paintability is required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikaflex AT Connection be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikaflex® AT Connection for connection joints around windows, doors and construction details where different substrates meet. It is a universal joint sealant for porous and non-porous materials, but it is not intended for swimming pools, permanent water contact or bituminous substrates.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component elastic joint sealant based on silane-crosslinked polymer.\u003c\/li\u003e\n  \u003cli\u003e25% deformation capacity according to BDS EN ISO 9047.\u003c\/li\u003e\n  \u003cli\u003eCan be painted after compatibility testing.\u003c\/li\u003e\n  \u003cli\u003eGood weather resistance.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to porous and non-porous substrates.\u003c\/li\u003e\n  \u003cli\u003eSolvent-free and has very good workability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eElastic joint sealant for connection joints\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e300 ml cartridge or 600 ml foil pack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColours\u003c\/td\u003e\n      \u003ctd\u003eWhite, grey, beige; other colours on request\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.30 kg\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eService temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom -40 °C to +90 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eJoint width\u003c\/td\u003e\n      \u003ctd\u003e10-35 mm, with a design width:depth ratio of 2:1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eYield from 600 ml\u003c\/td\u003e\n      \u003ctd\u003eApprox. 6 m at 10 x 10 mm; 3 m at 20 x 10 mm; 1.3 m at 30 x 15 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCuring rate\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2 mm\/24 h at +23 °C and 50% relative humidity\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSkin formation time\u003c\/td\u003e\n      \u003ctd\u003eApprox. 60 minutes at +23 °C and 50% relative humidity\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePrimer and backing profile\u003c\/h2\u003e\n\u003cp\u003eAfter substrate preparation, insert a backing rod such as \u003ca href=\"\/en\/products\/sika-rundschnur-pe-popalvasht-profil-ot-polietilenova-pyana-za-zapalvane-na-fugi\"\u003eSika® Rundschnur PE\u003c\/a\u003e to the required depth. For critical applications, the TDS specifies primer systems: \u003ca href=\"\/en\/products\/sika-primer-3-n-grund-za-poryozni-osnovi-i-metali-sadarzhasht-raztvoriteli\"\u003eSika® Primer-3 N\u003c\/a\u003e for concrete, aerated concrete, cement renders, screeds, bricks, natural stone and some metals after activation.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use on natural stone without a system check, although the TDS lists it in primer preparation for certain porous substrates.\u003c\/li\u003e\n  \u003cli\u003eDo not use on glass, bituminous substrates, natural rubber, EPDM or materials that release oils, plasticizers or solvents.\u003c\/li\u003e\n  \u003cli\u003eDo not use for seals in or around swimming pools.\u003c\/li\u003e\n  \u003cli\u003eDo not use for joints under water pressure or in permanent contact with water.\u003c\/li\u003e\n  \u003cli\u003ePaint must be tested for compatibility with the sealant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend photos, substrate types, joint width and depth, whether the joints are around windows\/doors and whether the joint will be painted. This helps with selecting the colour, primer, backing profile and number of packs.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"600 ml x 20pcs. \/ White","offer_id":54161095917892,"sku":"91932","price":192.24,"currency_code":"EUR","in_stock":true},{"title":"600 ml x 20pcs. \/ Beige","offer_id":54161121542468,"sku":"108317","price":192.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaflexATConnection-Universalenuplatnitelzasaedinitelnifugicopy.webp?v=1738145514"},{"product_id":"sikabond-at-universal-mnogofunktsionalno-lepilo-za-elastichno-zalepvane","title":"SikaBond® AT Universal - Elastic Multipurpose Adhesive","description":"\u003cp\u003e\u003cstrong\u003eSikaBond® AT Universal\u003c\/strong\u003e is a 1-component, solvent-free and silicone-free multipurpose adhesive for elastic bonding. It is used for interior and exterior bonding of cable ducts, acoustic panels, thresholds, lightweight building materials, roof and wall coverings, covers, and other elements.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose SikaBond AT Universal?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaBond® AT Universal when you need a universal elastic adhesive with good workability, good initial tack, and high adhesion to porous and non-porous substrates. The product is silicone-free, does not cause corrosion, and can be painted after a compatibility test.\u003c\/p\u003e\n\n\u003ch2\u003eMain Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMultipurpose adhesive for elastic bonding.\u003c\/li\u003e\n  \u003cli\u003eSolvent-free and silicone-free.\u003c\/li\u003e\n  \u003cli\u003eDoes not cause corrosion.\u003c\/li\u003e\n  \u003cli\u003eGood initial tack and fast curing.\u003c\/li\u003e\n  \u003cli\u003eHigh adhesive strength without primer in many applications.\u003c\/li\u003e\n  \u003cli\u003eGood resistance to weathering and water.\u003c\/li\u003e\n  \u003cli\u003eSuitable for porous and non-porous substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eSilane-crosslinked polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e300 ml cartridge and 600 ml foil pack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eWhite, dark grey\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.40 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e~1.5 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e~400%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMovement capability\u003c\/td\u003e\n\u003ctd\u003e±20%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -40 °C to +80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~44 ml per linear metre for stripe\/bead application\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCuring rate\u003c\/td\u003e\n\u003ctd\u003e~3 mm\/24 h at +23 °C and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSkin formation time\u003c\/td\u003e\n\u003ctd\u003e~35 min\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant Limitations\u003c\/h2\u003e\n\u003cp\u003eDo not use SikaBond® AT Universal for façade panels in suspended façades, for seals in or around swimming pools, on bituminous substrates, natural rubber, EPDM, or materials that release oils, plasticizers, or solvents. Do not use without primer on copper, titanium-zinc, or brass.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003eSend details of the materials, the substrate, whether the application is interior or exterior, whether the element will remain visible, and whether it will be exposed to weathering. This helps determine whether SikaBond® AT Universal, SikaBond® T-1+ or Sikaflex®-118 Extreme Grab is the right choice.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"300 ml x 12pcs. \/ Gray","offer_id":54161125671236,"sku":"526922","price":84.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaBondATUniversal-Mnogofunktsionalnolepilozaelastichnozalepvane.webp?v=1738145862"},{"product_id":"sikabond-t-1-purform-stroitelno-montazhno-lepilo","title":"SikaBond® T-1+ Purform - Polyurethane Construction Adhesive","description":"\u003cp\u003e\u003cstrong\u003eSikaBond® T-1+ Purform\u003c\/strong\u003e is an elastic 1-component polyurethane construction adhesive for interior and exterior applications. It is used for structural elastic bonding in construction, including terrace tiles, railings, raised-floor supports, sheet-metal flashings, facade cladding, roofing elements and finishing installation works.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaBond T-1+?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaBond® T-1+ when you need a polyurethane construction adhesive with elasticity, good mechanical resistance and weather resistance. The product cures with moisture from the air, forms a durable elastomer and absorbs vibration and impact loads.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component, ready-to-use polyurethane adhesive.\u003c\/li\u003e\n  \u003cli\u003eFlexible and elastic bonding.\u003c\/li\u003e\n  \u003cli\u003eSolvent-free, with very low emissions EMICODE EC1 PLUS R according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eBubble-free curing.\u003c\/li\u003e\n  \u003cli\u003eHigh adhesion to common construction materials.\u003c\/li\u003e\n  \u003cli\u003eGood resistance to weathering and ageing.\u003c\/li\u003e\n  \u003cli\u003eAbsorbs vibration and impact loading.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003ePolyurethane, curing with moisture from the air\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e600 ml foil pack, 20 units per box\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eWhite, concrete grey\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.39 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e1.2 N\/mm² with a 3 mm adhesive layer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e~600%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -40 °C to +80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBead application\u003c\/td\u003e\n\u003ctd\u003e~44 ml\/m; approx. 13 m from a 600 ml pack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSpot application\u003c\/td\u003e\n\u003ctd\u003e~200 spots with 30 mm diameter and 4 mm thickness from 600 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFull-surface application\u003c\/td\u003e\n\u003ctd\u003e~0.75-1.5 m² from 600 ml, depending on trowel, flatness and thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir +5 °C to +40 °C; substrate +5 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCuring rate\u003c\/td\u003e\n\u003ctd\u003e~3.5 mm\/24 h at +23 °C and 50% rel. humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSkin formation time\u003c\/td\u003e\n\u003ctd\u003e~50 min; elements should be bonded within ~35 min\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eDo not use SikaBond® T-1+ on Teflon, PE, PP, polystyrene, bituminous substrates, natural rubber, EPDM or materials that release oils, plasticizers or solvents. Sufficient relative humidity is required for proper curing, especially for full-surface bonding.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend details of what is being bonded, the substrate, the weight of the element, whether the application is interior or exterior, and whether vibration or impact loads are present. This allows confirmation that SikaBond® T-1+ is the correct construction adhesive, or whether another Sikaflex\/SikaBond product is required.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"600 ml x 20pcs. \/ Gray","offer_id":54161383915844,"sku":"741028","price":180.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaBondT-1Purform-Stroitelnomontazhnolepilocopy.webp?v=1738149424"},{"product_id":"sika-sikaflex-221-poliuretanov-fugouplatnitel-i-lepilo","title":"Sikaflex®-221 - Polyurethane Sealant and Adhesive","description":"\u003cp\u003e\u003cstrong\u003eSikaflex®-221\u003c\/strong\u003e is a versatile 1-component polyurethane joint sealant and adhesive for durable elastic seals. It is suitable when good adhesion to various substrates, elasticity, and the option for subsequent painting or sanding need to be combined.\u003c\/p\u003e\n\n\u003ch2\u003eWhere is Sikaflex 221 used?\u003c\/h2\u003e\n\u003cp\u003eSikaflex®-221 is used for elastic sealing and general adhesive-sealing applications on different materials. According to official Sika data, the product has good adhesion to metals, metal primers, 2-component paint coatings, ceramic materials, and plastics.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component polyurethane joint sealant and adhesive.\u003c\/li\u003e\n  \u003cli\u003eSuitable for durable elastic seals.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to a wide range of substrates.\u003c\/li\u003e\n  \u003cli\u003eAgeing resistance.\u003c\/li\u003e\n  \u003cli\u003eCan be sanded and painted.\u003c\/li\u003e\n  \u003cli\u003eNon-corrosive and low odour according to official product data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhen should you choose another product?\u003c\/h2\u003e\n\u003cp\u003eIf the application is a floor movement joint with vehicular loading, chemical exposure, permanent immersion in water, or structural bonding, Sikaflex®-221 should not automatically be assumed to be the correct choice. In these cases, it is safer to select a product from the Sikaflex® PRO range, Sikadur®, or another system according to the loading and substrate.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend information about the materials, joint width, interior or exterior application, whether it will be painted, and whether there is movement, water, or mechanical loading. This makes it possible to confirm whether Sikaflex®-221 is the correct joint sealant or whether a more specialised Sika product is required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-sikaflex221\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikaflex®-221\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e Sikaflex-221 is a universal product for standard elastic sealing and bonding. If the joint is subject to strong movement, chemical loading, permanent water exposure, or floor traffic, the choice should be compared with a specialised Sikaflex or a system waterproofing solution.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor choosing between joints, cracks, and sealants, see \u003ca href=\"\/en\/collections\/zapalvane-na-puknatini-i-fugi\"\u003ecrack and joint filling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor porous substrates and metals in Sikaflex systems, see \u003ca href=\"\/en\/products\/sika-primer-3-n-grund-za-poryozni-osnovi-i-metali-sadarzhasht-raztvoriteli\"\u003eSika® Primer-3 N\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor floor and industrial joints with higher loading, compare with \u003ca href=\"\/en\/products\/sikaflex-pro-3-purform-poliuretanov-uplatnitel-za-podovi-nastilki-i-inzhenerni-prilozhenia\"\u003eSikaflex® PRO-3 Purform®\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"300 ml x 12 pcs. \/ White","offer_id":54161444045124,"sku":"4392","price":105.62,"currency_code":"EUR","in_stock":true},{"title":"300 ml x 12 pcs. \/ Black","offer_id":54161444077892,"sku":"1389","price":105.62,"currency_code":"EUR","in_stock":true},{"title":"600 ml x 20 pcs. \/ Gray","offer_id":54161444110660,"sku":"46868","price":214.92,"currency_code":"EUR","in_stock":true},{"title":"600 ml x 20 pcs \/ White","offer_id":54161444143428,"sku":"32496","price":214.92,"currency_code":"EUR","in_stock":true},{"title":"600 ml x 20 pcs. \/ Black","offer_id":54161444176196,"sku":"46870","price":214.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaSikaflex-221-poliuretanovfugouplatnitelilepilo.webp?v=1738149947"},{"product_id":"sika-primer-3-n-grund-za-poryozni-osnovi-i-metali-sadarzhasht-raztvoriteli","title":"Sika® Primer-3 N - Primer for Sikaflex on Concrete and Metals","description":"\u003cp\u003e\u003cstrong\u003eSika® Primer-3 N\u003c\/strong\u003e is a 1-component, solvent-containing primer for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® systems on porous substrates and metals. It is used as an adhesion promoter before sealing or bonding when required by the system.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sika Primer-3 N be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Primer-3 N for joints and bonding applications on concrete, aerated concrete, cement renders, screeds, bricks and metals when the Sikaflex \/ SikaHyflex \/ SikaBond \/ Sikasil product or the project conditions require a primer. Important: the primer does not replace proper cleaning and substrate preparation.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component, solvent-containing epoxy resin-based primer.\u003c\/li\u003e\n  \u003cli\u003eSuitable for porous substrates and metals in Sika systems.\u003c\/li\u003e\n  \u003cli\u003eEasy to apply with a clean brush or roller.\u003c\/li\u003e\n  \u003cli\u003eWater-repellent.\u003c\/li\u003e\n  \u003cli\u003eShort solvent evaporation time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical reference values from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e1-component, solvent-containing primer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e250 ml, 1 l and 5 l metal containers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eTransparent\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.00 kg\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoverage on porous substrates\u003c\/td\u003e\n      \u003ctd\u003eApprox. 5 m²\/l or 250 linear metres\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoverage on non-porous substrates\u003c\/td\u003e\n      \u003ctd\u003eApprox. 8 m²\/l or 400 linear metres\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C, minimum 3 °C above the dew point\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSolvent evaporation time\u003c\/td\u003e\n      \u003ctd\u003eMinimum 30 minutes, maximum 8 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Cement laitance must be removed. Sika® Primer-3 N is applied in a single pass with a clean brush or roller, and the bottle must be tightly closed after each use.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUse within one month after opening the container.\u003c\/li\u003e\n  \u003cli\u003ePrimer that has gelled or separated must be discarded.\u003c\/li\u003e\n  \u003cli\u003eThe primer is an adhesion promoter and does not replace proper surface cleaning.\u003c\/li\u003e\n  \u003cli\u003eUse only when required by the specific Sika system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSpecify which Sikaflex, SikaHyflex, SikaBond or Sikasil product you will use, the substrate type and the total linear metres of joint. This allows verification that Primer-3 N is the correct primer and helps determine the required quantity.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"250 ml","offer_id":54161475174724,"sku":"114665","price":20.47,"currency_code":"EUR","in_stock":true},{"title":"1 l","offer_id":54161475207492,"sku":"122239","price":40.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaPrimer-3N-Grundzaporyozniosnoviimetali_sadarzhashtraztvoriteli.webp?v=1738150348"},{"product_id":"sika-rundschnur-pe-popalvasht-profil-ot-polietilenova-pyana-za-zapalvane-na-fugi","title":"Sika® Rundschnur PE - Joint Backer Rod Profile","description":"\u003cp\u003e\u003cstrong\u003eSika® Rundschnur PE\u003c\/strong\u003e is a non-absorbent closed-cell polyethylene foam backer rod profile. It is used as a backer rod to achieve the correct joint depth before applying joint sealant.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika Rundschnur PE?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Rundschnur PE when the joint depth must be controlled, sealant consumption reduced, and the correct joint cross-section formed. It is suitable for filling joints in accordance with DIN 18 540, floor joints, and connection joints.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFast and easy installation.\u003c\/li\u003e\n  \u003cli\u003eReduces the consumption rate of the joint sealant.\u003c\/li\u003e\n  \u003cli\u003eHelps achieve the correct joint dimensions and performance.\u003c\/li\u003e\n  \u003cli\u003eFlexible profile with a closed-cell structure.\u003c\/li\u003e\n  \u003cli\u003eNon-absorbent polyethylene material.\u003c\/li\u003e\n  \u003cli\u003eSuitable as a backing material for Sikaflex joint sealants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eClosed-cell polyethylene foam backer rod profile\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003ePolyethylene (PE)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eGrey\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 30 kg\/m³\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAvailable diameters according to TDS\u003c\/td\u003e\n      \u003ctd\u003e6, 8, 10, 13, 15, 20, 25, 30, 40 and 50 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eService temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom -80 °C to +90 °C in dry conditions, without mechanical load\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShelf life\u003c\/td\u003e\n      \u003ctd\u003eUnlimited when stored correctly in the original packaging\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eThe profile is placed at the required depth before the joint sealant is applied. Then follow the sealing and smoothing process for the selected Sikaflex product. When the correct diameter is selected, the profile helps the sealant work in the proper geometry instead of unnecessarily filling the full depth of the joint.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not damage, cut, or puncture the profile during installation.\u003c\/li\u003e\n  \u003cli\u003eDo not use sharp tools such as screwdrivers or knives for placement.\u003c\/li\u003e\n  \u003cli\u003eAvoid excessive elongation or stretching of the profile.\u003c\/li\u003e\n  \u003cli\u003eSelect the diameter according to the actual joint width and the required sealant depth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the width, depth, and total length of the joints, as well as which joint sealant will be used. This allows the correct diameter and approximate quantity of Sika® Rundschnur PE to be selected.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"6mm X 2500m","offer_id":54161505354052,"sku":"19085","price":426.6,"currency_code":"EUR","in_stock":true},{"title":"8mm X 1500m","offer_id":54161505386820,"sku":"18261","price":329.4,"currency_code":"EUR","in_stock":true},{"title":"10mm X 1150m","offer_id":54161505419588,"sku":"19084","price":266.76,"currency_code":"EUR","in_stock":true},{"title":"13mm X 750m","offer_id":54161505452356,"sku":"21905","price":260.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaRundschnurPE-Popalvashtprofilotpolietilenovapyanazazapalvanenafugi.webp?v=1738150595"},{"product_id":"sika-pistolet-za-silikon-310-ml-rachen","title":"Sika Silicone Gun 310 ml – Manual Gun for Standard Cartridges","description":"\u003cp\u003e\u003cstrong\u003eSika manual silicone gun 310 ml\u003c\/strong\u003e is a tool for applying standard 310 ml cartridges of sealants and adhesives. It is suitable for jointing, sealing and installation work with products in rigid cartridges when manual, controlled application is required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose a manual 310 ml silicone gun?\u003c\/h2\u003e\n\u003cp\u003eChoose this gun when working with standard 310 ml cartridges of silicone, polyurethane sealants, adhesives or other compatible cartridges. It is the basic choice for small and medium repairs, sanitary areas, window and door frames, joints and installation details.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication of sealants and adhesives in 310 ml cartridges.\u003c\/li\u003e\n  \u003cli\u003eSealing around windows and doors.\u003c\/li\u003e\n  \u003cli\u003eFilling joints and cracks.\u003c\/li\u003e\n  \u003cli\u003eInstallation and repair work.\u003c\/li\u003e\n  \u003cli\u003eSanitary and construction applications where the product is supplied in a standard rigid cartridge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat to check before purchase\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWhether the product you will apply is supplied in a 310 ml cartridge.\u003c\/li\u003e\n  \u003cli\u003eWhether you need a standard cartridge gun or a gun for 600 ml soft packs.\u003c\/li\u003e\n  \u003cli\u003eWhether the work is a one-off repair or daily professional application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eIf you will be working with Sika sealants in standard 300\/310 ml cartridges, this type of gun is the right choice. If the product is in a 600 ml sausage-type soft pack, choose Sika Avon 600 ml.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"Default Title","offer_id":54173056139588,"sku":"564352","price":6.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Pistolet-za-silikon-310ml-Sikacopy.webp?v=1738304263"},{"product_id":"sika-rachen-pistolet-za-meki-opakovki-avon-600ml","title":"Sika Avon 600 ml - Hand Gun for Sausage-Type Soft Packs","description":"\u003cp\u003e\u003cstrong\u003eSika Avon 600 ml\u003c\/strong\u003e is a manual gun for 600 ml sausage-type soft packs. It is suitable for professional application of sealants and adhesives in soft packs when working with a larger volume of material and when more efficient application is needed compared with a standard 310 ml cartridge.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sika Avon 600 ml?\u003c\/h2\u003e\n\u003cp\u003eChoose this gun when the product is supplied in a 600 ml soft pack and cannot be applied with a standard 310 ml silicone gun. It is the practical choice for longer joints, facade and construction details, window and door frame installation, and industrial and professional applications with higher material consumption.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication of sealants and adhesives in 600 ml soft packs.\u003c\/li\u003e\n  \u003cli\u003eSealing around windows and doors.\u003c\/li\u003e\n  \u003cli\u003eFilling construction and industrial joints.\u003c\/li\u003e\n  \u003cli\u003eInstallation and repair work with a larger volume of material.\u003c\/li\u003e\n  \u003cli\u003eProfessional work with Sika products in soft packs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat to check before purchasing\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWhether the product is a 600 ml sausage-type soft pack.\u003c\/li\u003e\n  \u003cli\u003eWhether you need a gun for soft packs, not a standard gun for 310 ml cartridges.\u003c\/li\u003e\n  \u003cli\u003eWhether the work volume justifies the larger gun compared with the standard manual option.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify which sealant or adhesive you will apply and what packaging the product is supplied in. If it is a standard 300\/310 ml cartridge, you need a manual 310 ml silicone gun; if it is a 600 ml soft pack, choose Sika Avon 600 ml.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"Default Title","offer_id":54173057122628,"sku":"122635","price":38.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/rychen-pistolet-za-meki-opakovki-avon-sika-600mlcopy.webp?v=1738304527"},{"product_id":"sikadur-31-2-komponentno-epoksidno-lepilo-za-konstruktivno-zalepvane-i-vazstanovyavane-na-beton","title":"Sikadur®-31+ - Epoxy Adhesive for Structural Bonding and Concrete Repair","description":"\u003cp\u003e\u003cstrong\u003eSikadur®-31+\u003c\/strong\u003e is a 2-component thixotropic epoxy adhesive for structural bonding and concrete repair. It bonds to most construction materials, works on dry or matt-damp concrete and can be used for repairing concrete elements, filling joints, sealing static cracks and reprofiling.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikadur 31+?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikadur®-31+ when you need a high-mechanical-strength epoxy adhesive for concrete that does not slump on vertical surfaces and can function as an adhesive, repair compound and filling material. It is suitable for professional applications and smaller repair details when the substrate is properly prepared.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eStructural repair of cracked and damaged concrete in buildings, bridges and infrastructure.\u003c\/li\u003e\n  \u003cli\u003eStructural bonding of concrete, stone, ceramics, fibre cement, mortar, bricks and masonry.\u003c\/li\u003e\n  \u003cli\u003eBonding to steel, iron, aluminium, wood, polyester, epoxies and glass.\u003c\/li\u003e\n  \u003cli\u003eReprofiling of small patches, edges, corners, blowholes and segregated concrete.\u003c\/li\u003e\n  \u003cli\u003eFilling joints, voids, cavities and non-load-bearing static cracks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh early and final mechanical strength.\u003c\/li\u003e\n  \u003cli\u003eR4 class for structural concrete repair according to EN 1504-3.\u003c\/li\u003e\n  \u003cli\u003eStructural bonding according to EN 1504-4.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to dry and matt-damp concrete.\u003c\/li\u003e\n  \u003cli\u003eThixotropic - does not slump on vertical surfaces and overhead applications.\u003c\/li\u003e\n  \u003cli\u003eNo primer required and no shrinkage during hardening.\u003c\/li\u003e\n  \u003cli\u003eLow VOC content and GEV-Emicode EC1PLUS according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eEpoxy resin and selected fillers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixed colour\u003c\/td\u003e\n\u003ctd\u003eConcrete grey\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e2.00 ± 0.1 kg\/L at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003eComponent A : B = 2 : 1 by weight or volume\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e2.0 kg\/m² for 1 mm thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum thickness\u003c\/td\u003e\n\u003ctd\u003e30 mm per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompressive strength\u003c\/td\u003e\n\u003ctd\u003eClass R4; ~75 MPa according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShear strength\u003c\/td\u003e\n\u003ctd\u003e16 MPa according to EN 12615\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAdhesion\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;5 MPa to dry\/damp concrete and \u0026gt;20 MPa to steel after 7 days at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +10 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~60 min at +23 °C; ~45 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe concrete or mortar must be at least 3-6 weeks old, sound, clean, dry or matt-damp, with no standing water, oils, grease, cement laitance or loose particles. Mix the components for a minimum of 3 minutes until a homogeneous colour is achieved, then transfer the material into a clean container and mix again. For heavy elements on vertical surfaces or overhead applications, provide temporary support until full hardening.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send details of what will be bonded or repaired, the area, required thickness, condition of the concrete and whether the substrate is dry or matt-damp. This allows the actual consumption to be calculated and helps avoid selecting a product that is too rigid, too thin or unsuitable for the specific joint.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"1.2 kg.","offer_id":54173063774532,"sku":"644948","price":32.62,"currency_code":"EUR","in_stock":true},{"title":"6 kg.","offer_id":54173063807300,"sku":"647993","price":78.08,"currency_code":"EUR","in_stock":true},{"title":"30 kg.","offer_id":54173063840068,"sku":"707808","price":347.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikadur-31_2-komponentnoepoksidnolepilo_zakonstruktivnozalepvaneivazstanovyavanenabeton.webp?v=1738304810"},{"product_id":"sika-antifreeze-1-dobavka-za-beton-protiv-zamrazvane","title":"Sika-Antifreeze® 1% - Winter Concreting Admixture","description":"\u003cp\u003e\u003cstrong\u003eSika-Antifreeze® 1%\u003c\/strong\u003e is a liquid admixture for winter concreting that accelerates early strength development at moderately low temperatures. The formula is chloride-free and suitable for reinforced concrete and prestressed elements when concrete works need to continue under the risk of mild freezing.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika-Antifreeze 1%?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika-Antifreeze® 1% when concrete needs to reach critical early strength faster in cold weather. The admixture does not replace correct winter concreting practice, but it helps during mild daytime freezing, night-time temperature drops and cold periods when the formwork, reinforcement and fresh concrete are protected in accordance with the TDS.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWinter concreting at moderately low temperatures.\u003c\/li\u003e\n  \u003cli\u003eConcrete works when mild daytime freezing is expected.\u003c\/li\u003e\n  \u003cli\u003eConcrete at risk of night-time temperature drops.\u003c\/li\u003e\n  \u003cli\u003eReinforced concrete and prestressed elements.\u003c\/li\u003e\n  \u003cli\u003eConcrete mixes where faster achievement of initial strength is important.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves the frost resistance of concrete during the early period.\u003c\/li\u003e\n  \u003cli\u003eHelps achieve better strength characteristics in cold conditions.\u003c\/li\u003e\n  \u003cli\u003eHelps concrete reach a critical strength of 4-5 MPa, at which it can withstand mild freezing.\u003c\/li\u003e\n  \u003cli\u003eChloride-free and does not introduce components that cause reinforcement corrosion.\u003c\/li\u003e\n  \u003cli\u003eCan be used with other Sika admixtures after preliminary testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eLiquid with special salts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eTransparent yellowish liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e1.23-1.27 kg\/L at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e6-10\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFreezing temperature\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; -15 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChloride ions\u003c\/td\u003e\n\u003ctd\u003eMax. 0.1%; chloride-free according to EN 934-2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDosage\u003c\/td\u003e\n\u003ctd\u003e1% by mass of cement, i.e. 1 kg per 100 kg cement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eASTM C 494-81 Type C according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant conditions for winter concreting\u003c\/h2\u003e\n\u003cp\u003eThe admixture must be added to the mixing water or after the components have been mixed, but not directly to dry cement. When added separately to fresh concrete, additional mixing for approximately 3 minutes is required. The formwork and reinforcement must be free from ice and snow, and the fresh concrete must be protected against heat and moisture loss until the required early strength is achieved.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the expected temperature, the cement content in the mix design, the concrete volume and whether the work will be carried out on site or at a concrete batching plant. This allows the actual quantity of admixture to be calculated and helps assess whether additional winter concreting measures are required.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"1 kg.","offer_id":54179107242308,"sku":"488070","price":2.24,"currency_code":"EUR","in_stock":true},{"title":"5 kg.","offer_id":54179107275076,"sku":"488069","price":8.53,"currency_code":"EUR","in_stock":true},{"title":"20 кг.","offer_id":54179107307844,"sku":"488067","price":31.55,"currency_code":"EUR","in_stock":true},{"title":"250 kg.","offer_id":54179107340612,"sku":"402259","price":308.67,"currency_code":"EUR","in_stock":true},{"title":"1250 кг.","offer_id":54179107373380,"sku":"488062","price":1550.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sika-Antifreeze1-Dobavkazabetonprotivzamrazvane.webp?v=1738400154"},{"product_id":"sikarapid-1-techen-uskoritel-na-vtvardyavaneto-za-beton-i-raztvor","title":"SikaRapid®-1 - Hardening Accelerator for Concrete and Mortar","description":"\u003cp\u003e\u003cstrong\u003eSikaRapid®-1\u003c\/strong\u003e is a liquid hardening accelerator for concrete and mortar, developed for faster early strength gain. It is suitable when high early strength is required within 6-24 hours, when faster formwork stripping is needed, or when the construction process must be accelerated without negatively affecting the final strength according to the TDS.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaRapid-1?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaRapid®-1 when the schedule is critical and the concrete must be ready for the next operation sooner. It is the right choice for precast concrete elements, ready-mix concrete requiring fast formwork stripping, slipform concreting, and winter conditions where critical strength must be reached more quickly.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProduction of precast concrete elements.\u003c\/li\u003e\n  \u003cli\u003eReady-mix concrete requiring fast formwork stripping.\u003c\/li\u003e\n  \u003cli\u003eConcreting in winter conditions for faster development of critical strength.\u003c\/li\u003e\n  \u003cli\u003eSlipform concreting.\u003c\/li\u003e\n  \u003cli\u003eReady-mix concrete where any delay in hardening is critical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides faster formwork turnaround for precast concrete elements.\u003c\/li\u003e\n  \u003cli\u003eCan reduce or eliminate heat or steam curing.\u003c\/li\u003e\n  \u003cli\u003eAccelerates the construction process and early load bearing.\u003c\/li\u003e\n  \u003cli\u003eAllows concreting to continue at low temperatures.\u003c\/li\u003e\n  \u003cli\u003eDoes not negatively affect final strengths according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eContains no chlorides and is suitable for reinforced concrete and prestressed elements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eBlend of organic and inorganic complex compounds\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eRed liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.17 kg\/l at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e~9.0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolid content\u003c\/td\u003e\n\u003ctd\u003e35.0 M.-%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eViscosity\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 10 mPa·s at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChloride ions\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.01 M.-%; chloride-free\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended dosage\u003c\/td\u003e\n\u003ctd\u003e0.5-1.5% by weight of cement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eEN 934-2, Table 7 according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eMethod of addition\u003c\/h2\u003e\n\u003cp\u003eSikaRapid®-1 is added to the mixing water and enters the concrete plant mixer together with it. It can also be added to the truck mixer on site, in which case additional mixing is required for 1 minute per m³ or for a minimum of 5 minutes to achieve a homogeneous mix. Do not add the product to dry cement.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the mix design, cement quantity, required early strength, working temperature, and whether the product will be dosed at the batching plant or on site. This allows a reasonable dosage to be selected within the TDS range and avoids working by assumption.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"1 kg.","offer_id":54179107995972,"sku":"402196","price":4.5,"currency_code":"EUR","in_stock":true},{"title":"5 kg.","offer_id":54179108028740,"sku":"402198","price":21.89,"currency_code":"EUR","in_stock":true},{"title":"23 kg.","offer_id":54179108061508,"sku":"402197","price":100.95,"currency_code":"EUR","in_stock":true},{"title":"250 kg.","offer_id":54179108094276,"sku":"402199","price":777.71,"currency_code":"EUR","in_stock":true},{"title":"1000 kg.","offer_id":54179108127044,"sku":"106891","price":2287.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaRapid-1-Techenuskoritelnavtvardyavanetozabetoniraztvor.webp?v=1738400620"},{"product_id":"sika-antisol-e-sastav-za-zashtita-na-betona-ot-prezhdevremenno-izsahvane","title":"Sika® Antisol® E - concrete protection against premature drying","description":"\u003cp\u003e\u003cstrong\u003eSika® Antisol® E\u003c\/strong\u003e is a ready-to-use liquid curing compound for spray application onto freshly placed concrete. After application, it forms a thin barrier film that limits premature water evaporation from the surface and helps achieve better curing, reduced cracking and a higher-quality concrete surface.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika Antisol E?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Antisol® E for large exposed concrete areas where rapid drying may lead to cracks, dusting or lower surface quality. The product is particularly useful for industrial floors, roads, roof slabs, loading areas and other surfaces exposed to wind, sun and variable humidity.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRoads, highways, runways and taxiways.\u003c\/li\u003e\n  \u003cli\u003eRoof slabs and large exposed concrete areas.\u003c\/li\u003e\n  \u003cli\u003eHangars, loading areas and industrial floors.\u003c\/li\u003e\n  \u003cli\u003eRetaining walls and building structures.\u003c\/li\u003e\n  \u003cli\u003ePrestressed structures and irrigation channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces the risk of early cracking and shrinkage.\u003c\/li\u003e\n  \u003cli\u003eHelps achieve the required strengths.\u003c\/li\u003e\n  \u003cli\u003eControls cement hydration by limiting evaporation.\u003c\/li\u003e\n  \u003cli\u003eReduces dusting and improves the overall appearance.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance during freeze\/thaw cycles.\u003c\/li\u003e\n  \u003cli\u003eCan save on more expensive methods for protecting concrete from drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eReady-to-use compound for protecting freshly placed concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eLiquid, white-coloured emulsion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e20 kg cans and 200 kg drums according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~0.98 ± 0.05 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e0.15-0.20 kg\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEquipment\u003c\/td\u003e\n\u003ctd\u003eManual backpack sprayer or motorised spray system\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +30 °C in the original sealed packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication and limitations\u003c\/h2\u003e\n\u003cp\u003eThe concrete surface must be free from standing water; evaporation of surface water may take from 30 minutes to 2 hours depending on the temperature and water\/cement ratio. Stir the product thoroughly and spray it as a fine mist until the surface is fully covered. After application, protect it from rain for at least 2-3 hours. Sika® Antisol® E must be removed before any subsequent screed or coating is applied.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, concrete type, application conditions and whether a screed or coating will be applied afterwards. This is important because the curing compound protects the concrete, but may be unsuitable as an intermediate layer under subsequent systems if it is not properly removed.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"20 kg.","offer_id":54179111993668,"sku":"540315","price":42.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaAntisolE-Sastavzazashtitanabetonaotprezhdevremennoizsahvane.webp?v=1738401144"},{"product_id":"sika-wt-200-p-kristalizirashta-dobavka-za-vodoplaten-beton","title":"Sika® WT-200 P - Crystallizing Admixture for Watertight Concrete","description":"\u003cp\u003e\u003cstrong\u003eSika® WT-200 P\u003c\/strong\u003e is a crystallizing and sealing admixture for watertight concrete. The active materials reduce concrete permeability and support the formation of insoluble crystals in pores and capillaries, including self-sealing of microcracks through crystallization according to the TDS.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sika WT-200 P be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® WT-200 P when watertightness needs to be built into the concrete mix itself, rather than achieved only with surface-applied waterproofing. The product is part of the Sika® Watertight Concrete system and is suitable for below-ground and above-ground concrete structures with high requirements for limiting water ingress.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFoundation slabs and underground rooms.\u003c\/li\u003e\n  \u003cli\u003eCar parks, garages and production areas.\u003c\/li\u003e\n  \u003cli\u003eTunnels, swimming pools and water-retaining structures.\u003c\/li\u003e\n  \u003cli\u003eDams and structures in wastewater treatment plants.\u003c\/li\u003e\n  \u003cli\u003eWatertight concrete structures in public buildings, shopping malls and transport hubs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces water penetration under pressure.\u003c\/li\u003e\n  \u003cli\u003eReduces water absorption.\u003c\/li\u003e\n  \u003cli\u003eImproves the concrete’s ability to self-seal microcracks.\u003c\/li\u003e\n  \u003cli\u003eImproves chemical resistance.\u003c\/li\u003e\n  \u003cli\u003eReduces vapour transmission.\u003c\/li\u003e\n  \u003cli\u003eWorks as part of a complete watertight concrete system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eMixture of cements, amino alcohols and fillers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eGreyish powder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e1.75 kg self-dissolving bags and 18 kg sacks according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBulk density\u003c\/td\u003e\n\u003ctd\u003e~750 kg\/m³\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDosage\u003c\/td\u003e\n\u003ctd\u003e1-2% by weight of binder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMix design\u003c\/td\u003e\n\u003ctd\u003eMin. 350 kg\/m³ cement and max. w\/c ratio 0.45 for Sika Watertight Concrete according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eBDS EN 934-2, Table 9 according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eDesign and mixing\u003c\/h2\u003e\n\u003cp\u003eFor watertight concrete, the mix design must be developed using the local raw materials and confirmed with laboratory or production trials. Sika® WT-200 P is added during concrete production at the batching plant. It can be added to the mixing water as a fine slurry or mixed with the aggregates before the cement and water are added. The consistency and water\/cement ratio remain the responsibility of the concrete producer.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the project details, concrete class, watertightness requirement, mix design, cement content and whether fly ash, GGBFS or silica fume are used. This allows the dosage and compatibility to be properly assessed before production.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-wt200p\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for watertight concrete\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e Sika WT-200 P works inside the concrete mix. For a watertight structure, the mix design, water\/cement ratio, compaction, joints and design details are also important — not only the admixture.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor other admixtures and concrete products, see \u003ca href=\"\/en\/collections\/dobavki-za-raztvori-i-beton\"\u003econcrete and mortar admixtures\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor construction and movement joints in watertight concrete, see \u003ca href=\"\/en\/collections\/nadezhdna-vodospirashta-sistema-za-betonni-fugi-ot-sika-waterbar\"\u003eSika Waterbar\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor surface-applied mineral waterproofing on concrete, see \u003ca href=\"\/en\/products\/sika-monotop-120-seal-ednokomponentna-tsimentova-hidroizolatsia-za-beton-i-zidaria\"\u003eSika MonoTop®-120 Seal\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"18 kg.","offer_id":54182618988868,"sku":"478512","price":60.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaWT-200P-Kristalizirashtadobavkazavodoplatenbeton.webp?v=1738473334"},{"product_id":"sika-separol-n-kofrazhno-maslo","title":"Sika® Separol® N - Formwork Oil for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSika® Separol® N\u003c\/strong\u003e is a ready-to-use, low-viscosity mineral formwork oil for clean release of concrete or mortar from smooth formwork moulds. The product does not cause staining, helps extend the service life of the formwork and provides a higher-quality concrete surface.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika Separol N?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Separol® N when you need to reduce adhesion of concrete to the formwork and achieve a cleaner surface after striking. It is suitable for absorbent and non-absorbent formwork, including precast concrete elements and architectural concrete where appearance is important.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFormwork oil for absorbent and non-absorbent formwork.\u003c\/li\u003e\n  \u003cli\u003eConcrete and precast concrete elements.\u003c\/li\u003e\n  \u003cli\u003eArchitectural concrete surfaces with higher appearance requirements.\u003c\/li\u003e\n  \u003cli\u003eExtending the service life of formwork through easier cleaning.\u003c\/li\u003e\n  \u003cli\u003eFormwork for heat treatment of finished elements when the formwork temperature is up to +70 °C according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReady to use and easy to apply.\u003c\/li\u003e\n  \u003cli\u003eVery effective due to its low viscosity.\u003c\/li\u003e\n  \u003cli\u003eDoes not cause corrosion.\u003c\/li\u003e\n  \u003cli\u003eProvides fast formwork removal and cleaning.\u003c\/li\u003e\n  \u003cli\u003eEnsures a clean concrete surface and reduces air bubbles.\u003c\/li\u003e\n  \u003cli\u003eSuitable for all types of concrete and resistant to vibration.\u003c\/li\u003e\n  \u003cli\u003eEconomical consumption rate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eLow-viscosity mineral formwork oil\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eYellow liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e5 L and 20 L cans, 200 L drum and 800 L container according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~0.90 kg\/L ±0.05 kg\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCoverage on wooden formwork\u003c\/td\u003e\n\u003ctd\u003e~15-22 m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCoverage on metal\/plastic formwork\u003c\/td\u003e\n\u003ctd\u003e~31-60 m²\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +30 °C in the original sealed packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication and limitations\u003c\/h2\u003e\n\u003cp\u003eThe formwork surface must be clean and free from dust, grease and concrete or mortar residues. Apply one even, continuous and thin coat by brush, roller or spray. Freshly applied Sika® Separol® N must be protected from rain for at least 1 hour. In enclosed areas, provide adequate ventilation and do not use open flames during application.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the formwork type, area, whether architectural concrete is required and whether you are working with wooden, metal or plastic moulds. This allows a more realistic calculation of consumption, as the absorbency and roughness of the formwork affect coverage.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5 l.","offer_id":54182626165060,"sku":"401609","price":44.28,"currency_code":"EUR","in_stock":true},{"title":"20 l.","offer_id":54182631473476,"sku":"401608","price":172.8,"currency_code":"EUR","in_stock":true},{"title":"200 l.","offer_id":54182631506244,"sku":"64585","price":1368.0,"currency_code":"EUR","in_stock":true},{"title":"1000 l.","offer_id":54182631539012,"sku":"529086","price":6384.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaSeparolN-Kofrazhnomaslo.webp?v=1738473784"},{"product_id":"sikafiber-ppm-12-polipropilenovii-mikrofibri-za-betoni-i-raztvori","title":"SikaFiber® PPM-12 - Polypropylene Microfibers for Concrete and Mortars","description":"\u003cp\u003e\u003cstrong\u003eSikaFiber® PPM-12\u003c\/strong\u003e are 12 mm monofilament polypropylene microfibers for concrete and cementitious mortars. They are used to reduce cracking from plastic shrinkage and drying shrinkage in non-structural concrete, screeds, renders, skim coats and precast concrete elements.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaFiber PPM-12?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaFiber® PPM-12 when you need to reduce the risk of fine cracks during the early curing period, without replacing structural reinforcement. These microfibers are intended for plastic shrinkage control and for improving the durability of concrete or mortar with a good base mix design.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConcrete pavements and non-structural concrete elements.\u003c\/li\u003e\n  \u003cli\u003eCementitious screeds.\u003c\/li\u003e\n  \u003cli\u003eRenders and skim coats.\u003c\/li\u003e\n  \u003cli\u003ePrecast concrete elements.\u003c\/li\u003e\n  \u003cli\u003eSprayed application and extruded concrete.\u003c\/li\u003e\n  \u003cli\u003eInterior and exterior applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReduce the tendency for cracking due to drying shrinkage and plastic shrinkage.\u003c\/li\u003e\n  \u003cli\u003eImprove the durability of concrete and mortar.\u003c\/li\u003e\n  \u003cli\u003eReduce plastic deformation and permeability.\u003c\/li\u003e\n  \u003cli\u003eReduce curling at slab edges.\u003c\/li\u003e\n  \u003cli\u003eIncrease impact resistance.\u003c\/li\u003e\n  \u003cli\u003eMay reduce damage at high temperatures when dosed appropriately.\u003c\/li\u003e\n  \u003cli\u003eEasy and safe to use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100% polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFiber type\u003c\/td\u003e\n\u003ctd\u003eClass 1a, monofilament according to BDS EN 14889-2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e32 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~0.91 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMelting point\u003c\/td\u003e\n\u003ctd\u003e~160 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended dosage\u003c\/td\u003e\n\u003ctd\u003e~600 g or 900 g per m³ of concrete\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFor reducing damage at high temperatures\u003c\/td\u003e\n\u003ctd\u003e1000-2000 g per m³ of concrete according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eCE marking and declaration according to EN 14889-2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eMixing and limitations\u003c\/h2\u003e\n\u003cp\u003eThe fibers are added with the dry aggregates and must be distributed evenly throughout the mix. They can also be added with the other components, but in that case the mixing time should be increased by approximately 1 additional minute for every 1 m³. Do not add the fibers directly into the water. SikaFiber® PPM-12 are not a substitute for structural steel reinforcement and will not compensate for poor-quality concrete or mortar.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the mix type, volume in m³, the purpose of using the fibers, and whether standard plastic shrinkage control or high-temperature behaviour is required. This allows the required dosage and number of packs to be calculated without unnecessary surplus.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"0.6 kg. white x 30 pcs","offer_id":54182632161604,"sku":"677723","price":106.92,"currency_code":"EUR","in_stock":true},{"title":"0.6 kg yellow","offer_id":54425307152708,"sku":"422928","price":4.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaFiberPPM-12-Polipropilenoviimikrofibrizabetoniiraztvori.webp?v=1738474197"},{"product_id":"sikawall-40-primer-akrilen-grund-za-niskoabsorbirashti-gladki-osnovi","title":"SikaWall®-40 Primer - concrete-contact primer with quartz","description":"\u003cp\u003e\u003cstrong\u003eSikaWall®-40 Primer\u003c\/strong\u003e is an acrylic concrete-contact primer with quartz sand for low-absorbency and smooth substrates. It is used before machine-applied lime-cement and gypsum-lime plasters, creating a rough surface texture and improving adhesion of the subsequent layer.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose SikaWall 40 Primer?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaWall®-40 Primer when the substrate is smooth, dense or low-absorbency and a standard primer will not provide sufficient mechanical key for plaster. It is the right product for searches such as concrete contact primer, bonding primer and quartz sand primer when the next layer is a machine-applied plaster, not a waterproofing or flooring system.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRequired bonding primer before machine-applied plasters on specific substrate types.\u003c\/li\u003e\n  \u003cli\u003eConcrete and precast concrete elements aged 28 days.\u003c\/li\u003e\n  \u003cli\u003eMortar aged 28 days.\u003c\/li\u003e\n  \u003cli\u003ePlasterboard and cement fibreboard.\u003c\/li\u003e\n  \u003cli\u003eInterior and exterior use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eContains quartz sand to create a rough texture on smooth substrates.\u003c\/li\u003e\n  \u003cli\u003eImproves adhesion for the subsequent plaster layer.\u003c\/li\u003e\n  \u003cli\u003eMicro-reinforced with cellulose fibres for optimal layer thickness.\u003c\/li\u003e\n  \u003cli\u003ePink\/red coloured for easy visual control of treated areas.\u003c\/li\u003e\n  \u003cli\u003eFast drying before the next layer.\u003c\/li\u003e\n  \u003cli\u003eLow VOC content \u0026lt;0.5 g\/l according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylic emulsion, calcium carbonate, quartz sand, fibres and additives\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg plastic pail\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003ePink\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.5 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGrain size\u003c\/td\u003e\n\u003ctd\u003eS \u0026lt; 1500 μm, class S3 according to EN ISO 1524\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePull-off adhesion\u003c\/td\u003e\n\u003ctd\u003e2.88 MPa according to EN ISO 4624\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e0.15-0.25 kg\/m² depending on the type and absorbency of the substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAmbient air temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +25 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, dry and free from loose particles or old coatings. Mix the material with a low-speed electric mixer until homogeneous. Apply undiluted with a brush or long-pile roller in one even coat; for machine application, dilution with water up to a maximum of 10% is permitted. Drying time of the layer is 6-8 hours depending on conditions, while the TDS states 1 day before the next layer at +20 °C and 50% relative humidity.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the substrate type, area and the plaster that will be applied afterwards. If you are looking for a concrete-contact primer for tiles, a flooring system or waterproofing, a different primer must be selected according to the specific system.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"25 kg.","offer_id":54182637928772,"sku":"644640","price":40.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaWall-40Primer-Akrilengrundzaniskoabsorbirashti_gladkiosnovi.webp?v=1738474547"},{"product_id":"sikalatex-beton-kontakt-vodoustoychiv-svarzvasht-agent-i-dobavka-za-raztvori","title":"SikaLatex® - bonding bridge and mortar additive","description":"\u003cp\u003e\u003cstrong\u003eSikaLatex®\u003c\/strong\u003e is a waterproof bonding agent and mortar additive based on synthetic rubber. It is used to prepare a bonding bridge and to improve mortars, screeds, repair mortars, renders, masonry mortars and site-mixed tile adhesives.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaLatex?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaLatex® when you do not need a ready-to-use quartz concrete contact primer, but a bonding bridge or an additive for cementitious mortar. The product improves adhesion, workability and mortar durability, but when used as a bonding bridge it must not be used neat or only diluted with water - a cement and sand mixture must always be added according to the TDS.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBonding bridge between a prepared substrate and the subsequent mortar.\u003c\/li\u003e\n  \u003cli\u003ePouring mortars and cement screeds.\u003c\/li\u003e\n  \u003cli\u003eRepair mortars for construction substrates.\u003c\/li\u003e\n  \u003cli\u003eMasonry mortars.\u003c\/li\u003e\n  \u003cli\u003eSite-mixed renders and tile adhesives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreases adhesion to the most common construction substrates.\u003c\/li\u003e\n  \u003cli\u003eReduces shrinkage and cracking.\u003c\/li\u003e\n  \u003cli\u003eIncreases wear resistance.\u003c\/li\u003e\n  \u003cli\u003eReduces permeability.\u003c\/li\u003e\n  \u003cli\u003eImproves mortar workability.\u003c\/li\u003e\n  \u003cli\u003eEasy to use when mixed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eStyrene-butadiene emulsion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhite liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e1 kg bottle, 4 kg and 20 kg canister, 1000 kg container according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.0 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChloride ions\u003c\/td\u003e\n\u003ctd\u003e≤ 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDosage for bonding bridge\u003c\/td\u003e\n\u003ctd\u003eSikaLatex® : water = 1 : 1, then cement\/sand is added\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDosage as mortar additive\u003c\/td\u003e\n\u003ctd\u003eSikaLatex® : water = 1 : 1 to 1 : 3\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +30 °C, protected from sunlight, frost and contamination\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean and free from dust, loose particles, surface contamination and materials that reduce adhesion. For a bonding bridge, pre-wet the prepared substrate, remove excess water and scrub the mixture in with a stiff brush to form a thin layer that fills irregularities, voids and pores. Apply the subsequent mortar wet on wet.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eLet us know whether you will use SikaLatex® as a bonding bridge or as a mortar additive, as well as the area, layer thickness and substrate type. If you need a ready-to-use quartz primer for renders, compare with SikaWall®-40 Primer.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"1 kg.","offer_id":54182655000900,"sku":"449489","price":3.21,"currency_code":"EUR","in_stock":true},{"title":"4 kg.","offer_id":54182669812036,"sku":"449780","price":11.8,"currency_code":"EUR","in_stock":true},{"title":"20 kg.","offer_id":54182669844804,"sku":"449488","price":57.02,"currency_code":"EUR","in_stock":true},{"title":"1000 kg.","offer_id":54182669877572,"sku":"449781","price":2476.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaLatex-Betonkontakt-Vodoustoychivsvarzvashtagentidobavkazaraztvori.webp?v=1738474838"},{"product_id":"sikagard-63-n-ral-7032-2-komponentno-epoksidno-zashtitno-pokritie-za-beton-i-metal","title":"Sikagard®-63 N RAL 7032 - epoxy protective coating for concrete and metal","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-63 N RAL 7032\u003c\/strong\u003e is a 2-component, 100% solids epoxy protective coating for concrete, cementitious substrates, epoxy compounds and metal. It is used as a chemically resistant, liquid-impermeable protective layer in industrial, food-processing, wastewater treatment, agricultural, chemical and pharmaceutical facilities.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikagard 63 N?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-63 N when you need an epoxy coating for concrete or metal with good mechanical and chemical resistance, high coverage and protection against liquids. The product is for professional use and requires control of moisture, substrate preparation, dew point and working time.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eChemically resistant protective layer on concrete, stone, cement mortar and smoothing\/rendering compounds.\u003c\/li\u003e\n  \u003cli\u003eCoating over epoxy-cementitious compounds and epoxy-based products.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion coating on metal.\u003c\/li\u003e\n  \u003cli\u003eProtection of linings in tanks and silos.\u003c\/li\u003e\n  \u003cli\u003eFood-processing facilities, wastewater treatment plants, agricultural, chemical, pharmaceutical and bottling plants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSolvent-free.\u003c\/li\u003e\n  \u003cli\u003e100% solids content.\u003c\/li\u003e\n  \u003cli\u003eGood mechanical and chemical resistance.\u003c\/li\u003e\n  \u003cli\u003eHigh coverage and easy mixing.\u003c\/li\u003e\n  \u003cli\u003eImpermeable to liquids.\u003c\/li\u003e\n  \u003cli\u003eCoating for concrete protection in accordance with BDS EN 1504-2 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eEpoxy resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRAL 7032 grey; other colours on request according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003eComponent A 8.70 kg + Component B 1.30 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.35 kg\/l at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003eComponent A : B = 83 : 17 by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~0.15 kg\/m² per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e~0.1 mm per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAdhesion\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;1.5 N\/mm² to concrete, \u0026gt;15 N\/mm² to steel, \u0026gt;10 N\/mm² to aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir from +10 °C to +30 °C; substrate from +10 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~30 min at +10 °C, ~20 min at +20 °C, ~10 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, clean and dry, free from dust, formwork oils, grease, old coatings, cement laitance or other materials that could impair adhesion. Concrete must be mechanically prepared to an open-textured surface, and metal must be blast-cleaned to Sa 2 1\/2 or SSPC-SP 10. Do not apply on damp substrates and protect the fresh coating from moisture, condensation and water for at least 24 hours.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the substrate, chemical exposure, area, required layer system and site conditions. For contact with specific chemicals or food products, resistance for the actual environment must be confirmed rather than selecting only by keyword.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"10 kg.","offer_id":54182688719172,"sku":"753241","price":211.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard-63NRAL7032-2-komponentnoepoksidnozashtitnopokritiezabetonimetal.webp?v=1738475381"},{"product_id":"sikacor-146-dw-epoksidno-pokritie-za-kontakt-s-piteyna-voda-sas-100-sadarzhanie-na-suho-veshtestvo","title":"SikaCor®-146 DW - Epoxy coating for contact with drinking water","description":"\u003cp\u003e\u003cstrong\u003eSikaCor®-146 DW\u003c\/strong\u003e is a fast-curing, 2-component epoxy coating with 100% solids content for steel and concrete. It is intended for surfaces in direct contact with liquids, including internal coatings for tanks, silos, containers, pipes and equipment for the supply of drinking water.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should SikaCor 146 DW be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaCor®-146 DW when the coating must perform in direct contact with drinking water, food, beverages or aggressive liquids, and hard-elastic protection with high resistance to mechanical impact, abrasion and shock is required. This is not a standard concrete paint, but a professional system in which preparation, moisture, layer thickness and curing time are critical.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal coating of tanks, silos and containers.\u003c\/li\u003e\n  \u003cli\u003ePipes with a minimum diameter greater than 300 mm.\u003c\/li\u003e\n  \u003cli\u003eEquipment for the supply of drinking water.\u003c\/li\u003e\n  \u003cli\u003eFacilities in the food and beverage industry.\u003c\/li\u003e\n  \u003cli\u003eCorrosion protection of steel, stainless steel and aluminium.\u003c\/li\u003e\n  \u003cli\u003eProtection of concrete and cementitious levelling mortars in direct contact with liquids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for drinking water, various foods, chemicals, cleaning agents and disinfectants according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eVery good adhesion to steel, stainless steel, aluminium and concrete.\u003c\/li\u003e\n  \u003cli\u003eEconomical single-layer application on steel substrates by airless spraying.\u003c\/li\u003e\n  \u003cli\u003eNo additional treatments are required before initial filling according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eDoes not contain benzyl alcohol.\u003c\/li\u003e\n  \u003cli\u003eCertified to UBA, DVGW W 270 and KIWA NL BRL-K 759 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003e2-component epoxy coating with 100% solids content\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlue, beige, red-brown; gloss finish\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e12.6 kg and 6.3 kg net according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.35 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003eA : B = 100 : 26 by weight; 100 : 39 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSteel - dry film\u003c\/td\u003e\n\u003ctd\u003e400 μm; consumption ~0.54 kg\/m²; coverage ~1.85 m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePermissible layer thickness when spraying\u003c\/td\u003e\n\u003ctd\u003eMinimum 300 μm to maximum 800 μm per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConcrete - moisture content\u003c\/td\u003e\n\u003ctd\u003eMax. 4% by volume, measured with a CM device\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eMinimum +15 °C for air and substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~20 min at +20 °C; ~10 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSystem and application\u003c\/h2\u003e\n\u003cp\u003eOn steel, the system may be 1 x 400 μm by airless spraying or 3 x 150 μm by roller according to the TDS. On concrete, a system-based preparation is required: polymer-cement or epoxy base coat, pore control, moisture content up to 4% and sufficient adhesion strength. For drinking water tanks, the final drying times of 10-14 days at +20 °C and the cleaning\/disinfection procedures before first filling must be observed.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify whether the substrate is steel or concrete, whether there is contact with drinking water\/food, the area, application method, measured moisture content and required film thickness. This product must be selected as a system, not as a single universal paint.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"12.6 kg. \/ Beige","offer_id":54182696616260,"sku":null,"price":438.89,"currency_code":"EUR","in_stock":true},{"title":"12.6 kg. \/ Sin","offer_id":54182696681796,"sku":null,"price":438.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaCor-146DW-Epoksidnopokritiezakontaktspiteynavodasas100_sadarzhanienasuhoveshtestvo.webp?v=1738475640"},{"product_id":"sikagard-5500-zashtitno-pokritie-za-beton-s-visoka-sposobnost-za-premostvane-na-puknatini","title":"Sikagard®-5500 RAL 7032 - Elastic Protective Coating for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-5500 RAL 7032\u003c\/strong\u003e is a 1-component, water-based elastic protective coating for concrete with high crack-bridging ability. It is used for decorative and technical protection of new and existing concrete structures, reducing the penetration of CO2, chlorides and moisture into the concrete and reinforcement.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikagard 5500 be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-5500 when the concrete structure is at risk of cracking, cyclic movement, carbonation, weathering or chloride penetration. The product is suitable for facades, bridges, car parks, silos, chimneys, retaining walls and Sika repair systems where elastic protection is required rather than a rigid epoxy coating.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew concrete and reinforced concrete structures.\u003c\/li\u003e\n  \u003cli\u003eExtending the service life of concrete elements subject to cracking or cyclic movement.\u003c\/li\u003e\n  \u003cli\u003eBuildings, bridges, car parks, silos, chimneys and retaining walls.\u003c\/li\u003e\n  \u003cli\u003eReduction of damage by limiting chloride and CO2 penetration.\u003c\/li\u003e\n  \u003cli\u003eControl of reinforcement corrosion by restricting moisture ingress.\u003c\/li\u003e\n  \u003cli\u003eProtective coating over Sika levelling and sealing compounds for concrete repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-based, 1-component and ready to use.\u003c\/li\u003e\n  \u003cli\u003eVery good crack-bridging ability at low temperatures down to -20 °C according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eHigh diffusion resistance to CO2 and reduction of carbonation.\u003c\/li\u003e\n  \u003cli\u003eVapour-permeable protective coating.\u003c\/li\u003e\n  \u003cli\u003eResistant to cyclic freeze\/thaw exposure and de-icing salts.\u003c\/li\u003e\n  \u003cli\u003eVery good resistance to weathering and ageing.\u003c\/li\u003e\n  \u003cli\u003eReduces the growth of algae and fungi.\u003c\/li\u003e\n  \u003cli\u003eCE marking to EN 1504-2 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylate dispersion from renewable raw materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e15 l pail (~20.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhite thixotropic liquid; matt-gloss finish after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.37 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSikagard-5500 consumption\u003c\/td\u003e\n\u003ctd\u003e~0.30-0.60 kg\/m² per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMinimum dry film thickness\u003c\/td\u003e\n\u003ctd\u003e~210 μm for CO2 equivalent air layer thickness of 50 m\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStatic crack-bridging\u003c\/td\u003e\n\u003ctd\u003eA5 at -20 °C for 2 x 300, 2 x 500 or 2 x 600 g\/m² according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDynamic crack-bridging\u003c\/td\u003e\n\u003ctd\u003eB2 to B4.1 at -20 °C depending on consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAdhesion\u003c\/td\u003e\n\u003ctd\u003e1.9 N\/mm² to EN 1542\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +8 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSystem primers and limitations\u003c\/h2\u003e\n\u003cp\u003eThe system uses Sikagard®-552 W Aquaprimer or Sikagard®-551 S Elastic Primer with an indicative consumption of 0.10-0.15 kg\/m². The substrate must be clean, dry and prepared; new concrete must be at least 28 days old. Sikagard®-5500 is resistant to humid weather conditions, but is not suitable for permanent contact with water, underwater use or horizontal surfaces where puddles form.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the area, whether the concrete is new or has an existing coating, the type of cracks, the exposure conditions and whether Sikagard®-552 W Aquaprimer or Sikagard®-551 S Elastic Primer will be applied. This allows the correct system and realistic consumption to be selected, rather than calculating only by litres.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"15 l.","offer_id":54182697763140,"sku":"718661","price":220.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard-5500_RAL7032_-_Zashtitno_pokritie_za_beton_s_visoka_sposobnost_za_premostvane_na_puknatini.webp?v=1738476004"},{"product_id":"sikagard-552-w-aquaprimer-grund-na-vodna-osnova","title":"Sikagard®-552 W Aquaprimer - Water-Based Primer for Protective Coatings on Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-552 W Aquaprimer\u003c\/strong\u003e is a 1-component water-dispersed primer for improving adhesion when applying water-based polymer coatings and paints. It is used on concrete and mineral substrates, as well as on existing water-based coatings with good adhesion, as part of concrete protection systems according to EN 1504-2.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikagard 552 W Aquaprimer?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-552 W Aquaprimer when the subsequent coating is water-dispersed, for example Sikagard®-5500, and a system primer is required for concrete, fibre cement, aerated concrete, gypsum or thin skim-coat compounds. If the subsequent coating is solvent-based, the TDS states that Sikagard®-551 S Elastic Primer must be used instead of this product.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimer on concrete and mineral substrates before water-based polymer coatings\/paints.\u003c\/li\u003e\n  \u003cli\u003ePrimer on fibre cement, aerated concrete, gypsum and thin skim-coat compounds.\u003c\/li\u003e\n  \u003cli\u003ePrimer on Sika® MonoTop®-620, Sika® MonoTop®-723 N, Icoment-520 and similar substrates.\u003c\/li\u003e\n  \u003cli\u003ePrimer on existing water-based coatings with good adhesion.\u003c\/li\u003e\n  \u003cli\u003eUnder cementitious reprofiling compounds on concrete treated with a hydrophobic impregnation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSolvent-free, water-based dispersion.\u003c\/li\u003e\n  \u003cli\u003eVapour-permeable primer.\u003c\/li\u003e\n  \u003cli\u003eImproves adhesion to the substrate for water-based coatings and cementitious reprofiling compounds.\u003c\/li\u003e\n  \u003cli\u003ePart of a concrete surface protection system according to BDS EN 1504-2, as stated in the TDS.\u003c\/li\u003e\n  \u003cli\u003eReady to use and easy to apply by brush, roller or airless spray.\u003c\/li\u003e\n  \u003cli\u003eVOC \u0026lt;30 g\/l according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylate dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e10 l plastic pails according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eMilky white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.0 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolids content by volume\u003c\/td\u003e\n\u003ctd\u003e~20%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~0.10-0.12 kg\/m² or ~8-10 m²\/l, depending on absorption\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +8 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time to next coat\u003c\/td\u003e\n\u003ctd\u003e12 h at +8 °C, 5 h at +20 °C, 2.5 h at +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, free from poorly bonded particles, and have a tensile adhesion strength above 1 N\/mm². New concrete must be at least 28 days old. Do not dilute the product. When used under cementitious renders or reprofiling compounds, the subsequent mortar must be applied while the primer is still tacky; if the primer has dried completely, apply a new coat.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify which coating will be applied after the primer, whether the substrate is new concrete, a skim coat or an old coating, and whether the coating is water-based. This is important because Sikagard®-552 W Aquaprimer is not a universal primer for all coatings.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"8 l.","offer_id":54182705692996,"sku":"740849","price":59.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard-552WAquaprimer-Grundnavodnaosnova.webp?v=1738476451"},{"product_id":"sikatop-armatec-110-epocem-svarzvasht-grund-i-zashtita-na-armirovkata-ot-korozia","title":"SikaTop® Armatec®-110 EpoCem® - bonding primer and reinforcement corrosion protection","description":"\u003cp\u003e\u003cstrong\u003eSikaTop® Armatec®-110 EpoCem®\u003c\/strong\u003e is a 3-component cement-epoxy composition with a corrosion inhibitor, used as a bonding primer and reinforcement protection in concrete repair. It is used as part of the Sika repair and restoration system according to EN 1504 where high adhesion, corrosion protection and a longer open time are required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaTop Armatec 110 EpoCem?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaTop® Armatec®-110 EpoCem® when concrete repair involves exposed reinforcement, corrosion risk or higher system requirements than a standard cementitious bonding primer. The product works as reinforcement protection and as a bonding primer on concrete and mortars before Sika MonoTop® repair mortars.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforcement corrosion protection in concrete restoration.\u003c\/li\u003e\n  \u003cli\u003eBonding primer on concrete and mortars.\u003c\/li\u003e\n  \u003cli\u003eControl of anodic areas according to Principle 11, Method 11.1 of BDS EN 1504-9.\u003c\/li\u003e\n  \u003cli\u003eSystem product before Sika MonoTop® repair mortars.\u003c\/li\u003e\n  \u003cli\u003eApplications under dynamic impacts according to the tests in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEpoCem® technology for improved adhesion.\u003c\/li\u003e\n  \u003cli\u003eContains a corrosion inhibitor.\u003c\/li\u003e\n  \u003cli\u003eExcellent adhesion to concrete and steel.\u003c\/li\u003e\n  \u003cli\u003eGood resistance to water and chloride penetration.\u003c\/li\u003e\n  \u003cli\u003eLong open time for applying repair mortars.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Sika® MonoTop® repair mortars.\u003c\/li\u003e\n  \u003cli\u003eMeets BDS EN 1504-7 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003ePortland cement, epoxy resin, selected fillers and additives\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e20 kg set: A 1.14 kg + B 2.86 kg + C 16 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity of mixed A+B+C\u003c\/td\u003e\n\u003ctd\u003e~2.0 kg\/l at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTensile adhesion strength\u003c\/td\u003e\n\u003ctd\u003e≥1.5 N\/mm² after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption as corrosion protection\u003c\/td\u003e\n\u003ctd\u003e~2 kg\/m² for 1 mm; minimum 2 coats with a total of ~2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption as bonding primer\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;1.5 to 2.0 kg\/m²\/mm depending on the substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~3 hours at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax. waiting time before repair mortar\u003c\/td\u003e\n\u003ctd\u003e6 h at +5 °C, 5 h at +10 °C, 2 h at +20 °C, 1 h at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe concrete must be clean and free from dust, loose particles and contamination. Reinforcement must be cleaned to grade Sa 2 according to BDS ISO 8501-1 by abrasive or water blasting. Components A and B are mixed, then component C is added; do not add water. As a bonding primer, the product is worked firmly into the substrate and the repair mortar is applied wet-on-wet.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify whether the product will be used for reinforcement, as a bonding primer or both, as well as the area, the condition of the concrete and which repair mortar will be applied afterwards. This helps determine whether SikaTop® Armatec®-110 EpoCem® or Sika MonoTop®-610 is the right choice for the actual exposure and requirements.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"20 kg.","offer_id":54182749110596,"sku":"566556","price":95.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaTopArmatec-110EpoCem-Svarzvashtgrundizashtitanaarmirovkataotkorozia.webp?v=1738479293"},{"product_id":"sika-monotop-412-rs-sastav-za-vazstanovyavane-na-beton-klas-r4-do-50mm","title":"Sika MonoTop®-412 N RS - R4 Concrete Repair Mortar up to 50 mm","description":"\u003cp\u003e\u003cstrong\u003eSika MonoTop®-412 N RS\u003c\/strong\u003e is a 1-component, fiber-reinforced repair mortar for concrete restoration, with low shrinkage and class R4 according to EN 1504-3. It is suitable for manual and machine application when repairing damaged concrete in buildings, bridges and infrastructure projects.\u003c\/p\u003e\n\n\u003ch2\u003eWhere is Sika MonoTop 412 N RS used?\u003c\/h2\u003e\n\u003cp\u003eThe product is suitable for repair and restoration works according to EN 1504-9, for structural strengthening by adding mortar, and for preserving or restoring the passivity of concrete by increasing the cover or replacing contaminated\/carbonated concrete.\u003c\/p\u003e\n\n\u003ch2\u003eMain technical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eClass R4 according to EN 1504-3.\u003c\/li\u003e\n  \u003cli\u003eApplication thickness up to 50 mm in 1 layer.\u003c\/li\u003e\n  \u003cli\u003eSuitable for manual and machine application.\u003c\/li\u003e\n  \u003cli\u003eExcellent workability and finishing capability.\u003c\/li\u003e\n  \u003cli\u003eVery low shrinkage.\u003c\/li\u003e\n  \u003cli\u003eExcellent adhesion to concrete, stone, brick and reinforcement.\u003c\/li\u003e\n  \u003cli\u003eLow chloride permeability.\u003c\/li\u003e\n  \u003cli\u003eReaction to fire class A1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConsumption and thickness\u003c\/h2\u003e\n\u003cp\u003eAccording to the technical data sheet, the layer thickness is from 6 to 50 mm. Approximate consumption is about 19 kg\/m² of powder mix for a 1 cm thick layer, while actual consumption depends on surface unevenness and the thickness of the applied layer.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend photos of the concrete, the repair depth, whether there is exposed reinforcement, whether the application is internal or external, and whether manual or machine application is required. This helps determine whether MonoTop®-412 N RS is the correct repair mortar or whether a system with a bonding primer and reinforcement protection is needed.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"20 kg.","offer_id":54182750978372,"sku":null,"price":22.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sika-monotop-412-rs-sastav-za-vazstanovyavane-na-beton-klas-r4-do-50mm.webp?v=1781509181"},{"product_id":"sika-monotop-610-tsimentov-raztvor-za-svarzvasht-grund-i-zashtita-na-armirovkata-ot-korozia","title":"Sika MonoTop®-610 - Cementitious Bonding Primer and Rebar Protection","description":"\u003cp\u003e\u003cstrong\u003eSika MonoTop®-610\u003c\/strong\u003e is a 1-component, polymer-modified cementitious mortar for use as a bonding primer and reinforcement corrosion protection. It is used as a system product in Sika MonoTop® concrete repair when a bonding bridge between existing and new concrete or cementitious protection of reinforcement is required.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose Sika MonoTop®-610?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika MonoTop®-610 when you need a cementitious bonding primer for concrete repair that is mixed only with water and acts as a bridge between prepared existing concrete and the subsequent repair mortar. For higher requirements, dynamic exposure or an EpoCem® system, compare with SikaTop® Armatec®-110 EpoCem®.\u003c\/p\u003e\n\n\u003ch2\u003eMain Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBonding primer as part of a concrete repair system.\u003c\/li\u003e\n  \u003cli\u003eBonding bridge between existing and new concrete.\u003c\/li\u003e\n  \u003cli\u003eReinforcement corrosion protection in concrete repair.\u003c\/li\u003e\n  \u003cli\u003eControl of anodic areas according to Principle 11, Method 11.1 of BDS EN 1504-9.\u003c\/li\u003e\n  \u003cli\u003eSystem product before Sika MonoTop® repair and restoration mortars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component product - only water is added.\u003c\/li\u003e\n  \u003cli\u003eVery good adhesion to concrete and steel.\u003c\/li\u003e\n  \u003cli\u003eGood resistance to water and chloride penetration.\u003c\/li\u003e\n  \u003cli\u003eCan be applied by brush or by wet spray application.\u003c\/li\u003e\n  \u003cli\u003eReaction to fire class A1.\u003c\/li\u003e\n  \u003cli\u003eTested in accordance with BDS EN 1504-7 as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003ePortland cement, silica fume, polymer powders, aggregates and additives\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e25 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFresh mortar density\u003c\/td\u003e\n\u003ctd\u003e~2.1 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWater for 25 kg\u003c\/td\u003e\n\u003ctd\u003e4.25-4.75 l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eYield\u003c\/td\u003e\n\u003ctd\u003e~14.5 l of fresh mortar from 25 kg dry mix\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption as bonding primer\u003c\/td\u003e\n\u003ctd\u003e~1.5-2.0 kg\/m² dry mix at 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption as reinforcement protection\u003c\/td\u003e\n\u003ctd\u003e~2.0 kg\/m² dry mix at 1 mm; 2 coats are required\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompressive strength\u003c\/td\u003e\n\u003ctd\u003e~50 MPa after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTensile adhesion strength\u003c\/td\u003e\n\u003ctd\u003e~2.0 MPa after 28 days\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~90-120 min at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eThe concrete surface must be cleaned of dust, weak particles and materials that impair adhesion. Reinforcement must be cleaned to grade Sa 2. As a bonding primer, the substrate is pre-dampened and Sika MonoTop®-610 is applied as a thin coat that fills pores and voids; the repair mortar is applied wet-on-wet. As reinforcement protection, apply two coats of ~1 mm each.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, whether reinforcement is exposed, which repair mortar will be applied afterwards and whether the work will be carried out manually or by machine. If the reinforcement is heavily corroded or the system has high requirements, SikaTop® Armatec®-110 EpoCem® may be more suitable.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"20 kg.","offer_id":54182804586820,"sku":"814086","price":22.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaMonoTop-610-Tsimentovraztvorzasvarzvashtgrundizashtitanaarmirovkataotkorozia-20kg.jpg?v=1738482196"},{"product_id":"sika-monotop-612-sastav-za-debelosloyno-vazstanovyavane-na-beton-klas-r4-30-mm","title":"Sika MonoTop®-612 - R4 Concrete Repair Mortar up to 30 mm","description":"\u003cdiv data-product-notice=\"monotop-612-discontinued-2026-06-15\" style=\"border: 1px solid #dc2626; background: #fff1f2; color: #991b1b; padding: 16px 18px; border-radius: 8px; margin: 0 0 22px; line-height: 1.5;\"\u003e\n  \u003cp style=\"margin: 0 0 8px; font-size: 17px; font-weight: 700;\"\u003eImportant: Sika MonoTop®-612 is no longer available.\u003c\/p\u003e\n  \u003cp style=\"margin: 0;\"\u003eAccording to current information from Sika, the replacement is \u003ca href=\"\/en\/products\/sika-monotop-412-rs-sastav-za-vazstanovyavane-na-beton-klas-r4-do-50mm\" style=\"color: #b91c1c; font-weight: 700; text-decoration: underline;\"\u003eSika MonoTop®-412 RS\u003c\/a\u003e - an R4 class repair mortar for concrete repair up to 50 mm in one layer.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eSika MonoTop®-612\u003c\/strong\u003e is a 1-component, fibre-reinforced structural repair mortar for \u003cstrong\u003ethick-layer concrete repair\u003c\/strong\u003e. According to the technical data sheet, the product contains microsilica powder and meets the requirements of \u003cstrong\u003eclass R4 according to EN 1504-3\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eWhen is Sika MonoTop®-612 used?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor vertical surfaces and soffits\u003c\/strong\u003e - when a thick-layer repair mortar is required for concrete repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor repairing concrete elements\u003c\/strong\u003e - for spalled, damaged or carbonated concrete in buildings, bridges and infrastructure projects.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor levelling before coatings\u003c\/strong\u003e - when the concrete surface needs to be prepared before a protective or decorative coating.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor structural strengthening\u003c\/strong\u003e - when the system requires the addition of repair mortar in accordance with the principles of EN 1504-9.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey technical data\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProperty\u003c\/th\u003e\n      \u003cth\u003eValue according to TDS\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClass\u003c\/td\u003e\n      \u003ctd\u003eR4 according to EN 1504-3.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer thickness\u003c\/td\u003e\n      \u003ctd\u003eMinimum 5 mm \/ maximum 30 mm.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApproximately 18-20 kg of powder mix per 1 m² at a 1 cm layer thickness.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing\u003c\/td\u003e\n      \u003ctd\u003e2.75-3.25 l of water per 25 kg of powder mix.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e25 kg bag.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSika MonoTop®-612 or MonoTop®-412 RS?\u003c\/h2\u003e\n\u003cp\u003eMonoTop®-612 is a strong choice for repairs up to 30 mm per layer and systematic R4 class concrete repair. If the project requires application up to 50 mm in one layer, also compare \u003ca href=\"\/en\/products\/sika-monotop-412-rs-sastav-za-vazstanovyavane-na-beton-klas-r4-do-50mm\"\u003eSika MonoTop®-412 RS\u003c\/a\u003e. The correct choice depends on the repair depth, the condition of the reinforcement, the application method and the subsequent protection.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend photos, the approximate repair depth, whether there is exposed reinforcement, whether the area is vertical, overhead or horizontal, and whether a protective coating will be applied after the repair. This helps select the correct system of \u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003econcrete repair mortars\u003c\/a\u003e, including a bonding primer or reinforcement protection if required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-monotop612\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated systems for Sika MonoTop®-612\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e MonoTop-612 is the repair layer, but the long-term result depends on preparation of the reinforcement, the bonding layer where required, levelling and final protection of the concrete.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor comparison with other repair products, see \u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003eSika repair and refurbishment mortars\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor reinforcement protection and bonding primer, see \u003ca href=\"\/en\/products\/sika-monotop-610-tsimentov-raztvor-za-svarzvasht-grund-i-zashtita-na-armirovkata-ot-korozia\"\u003eSika MonoTop®-610\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor fine levelling and pore sealing, see \u003ca href=\"\/en\/products\/sika-monotop-620-izravnitelen-raztvor-i-sastav-za-zapechatka-na-porite-klas-r3-do-5mm\"\u003eSika MonoTop®-620\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"25 kg.","offer_id":54182815498564,"sku":"104840","price":21.54,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaMonoTop-612-Sastavzadebelosloynovazstanovyavanenabeton_klasR4_30mm.webp?v=1738482383"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/collections\/produkti-za-beton.webp?v=1791892415","url":"https:\/\/stroitelna-himia.bg\/en\/collections\/produkti-za-beton.oembed?page=5","provider":"Строителна Химия","version":"1.0","type":"link"}