{"title":"Waterproofing for Concrete Bridges and Viaducts","description":"\u003cdiv class=\"t4s-rte\"\u003e\u003cp\u003eBridge deck waterproofing is a continuous protective layer between the structural deck and the road surfacing. It limits water and dissolved salts reaching the concrete and reinforcement and works together with drainage, joints and asphalt layers. For concrete bridges and viaducts beneath asphalt, the ELASTOMASTIC TFN system combines MBC-VT 116 epoxy primer, an epoxy-polyurethane waterproofing layer and quartz broadcasts. \u003cstrong\u003eMBC-VT 116 primer is also suitable for early-age concrete from 7 days of age.\u003c\/strong\u003e Before applying ELASTOMASTIC TFN, the substrate must be checked separately against the requirements for the next layer.\u003c\/p\u003e\n\u003cp\u003eThis collection contains the two main products: \u003ca href=\"\/en\/products\/mbc-vt-116-termoustoychiva-epoksidna-smola-30-kg\"\u003eMBC-VT 116, 30 kg\u003c\/a\u003e for priming the concrete substrate and \u003ca href=\"\/en\/products\/elastomastic-tfn-sherwin-williams\"\u003eElastomastic™ TFN, 20 kg\u003c\/a\u003e for the tough-elastic coating. Quartz grades, consumption and details are selected for the complete system build-up.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"#bridge-layers\"\u003eSystem layers\u003c\/a\u003e · \u003ca href=\"#bridge-data\"\u003eTechnical performance\u003c\/a\u003e · \u003ca href=\"#bridge-application\"\u003eApplication\u003c\/a\u003e · \u003ca href=\"#bridge-consumption\"\u003eConsumption\u003c\/a\u003e · \u003ca href=\"#bridge-price\"\u003ePrice and selection\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eConcrete bridge deck waterproofing beneath asphalt\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eWater can reach the bridge deck through road surfacing, cracks and connections around kerbs and drainage outlets. Asphalt and waterproofing therefore perform different functions: the surfacing carries traffic, while the waterproofing system protects the substrate against water ingress. Bonding between layers also matters under braking, acceleration and temperature changes.\u003c\/p\u003e\n\u003cp\u003eA liquid-applied coating forms a continuous layer following the prepared deck geometry. It can be used in new construction and refurbishment where the structure, substrate and project detail specify this system. Refurbishment starts with assessing the existing layers, the concrete condition and the cause of leakage.\u003c\/p\u003e\n\u003ch2 id=\"bridge-layers\"\u003e\u003cstrong\u003eSystem build-up and layer sequence\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eFor the concrete deck beneath asphalt, the layers run from bottom to top:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSound, prepared reinforced-concrete deck with completed falls and repaired defects.\u003c\/li\u003e\n\u003cli\u003eMBC-VT 116 epoxy primer to bond to the concrete substrate.\u003c\/li\u003e\n\u003cli\u003eQuartz broadcast with a particle size of 0.4–0.8 mm.\u003c\/li\u003e\n\u003cli\u003eTwo-component ELASTOMASTIC TFN epoxy-polyurethane layer with a dry film thickness of at least 2 mm.\u003c\/li\u003e\n\u003cli\u003eQuartz broadcast with a particle size of 1.0–3.0 mm to provide the surface profile for the following layer.\u003c\/li\u003e\n\u003cli\u003eAsphalt concrete surfacing of the type and thickness specified by the road design.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis is a specific build-up for a concrete road deck. Primer substitutions, changes to aggregate grading or adding filler to the resin require a project-specific technical decision. Waterproofing thickness is checked separately from the height of the quartz broadcast.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhat does each product do?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eMBC-VT 116 — epoxy primer for the concrete deck\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/mbc-vt-116-termoustoychiva-epoksidna-smola-30-kg\"\u003eMBC-VT 116 by MC-Bauchemie\u003c\/a\u003e is a two-component, red-transparent, heat-resistant epoxy resin. It serves as the primer in this build-up. Separate applications include sealing and scratch coating, each with its own application sequence and consumption. Priming prepares the bond to the substrate; it does not provide the entire waterproofing layer.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eElastomastic™ TFN — epoxy-polyurethane coating\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/elastomastic-tfn-sherwin-williams\"\u003eElastomastic™ TFN by Sherwin-Williams\u003c\/a\u003e forms a tough-elastic, mechanically resistant coating. It is a two-component, solvent-free material, approximately RAL 7037. Within the bridge system it provides the continuous protective layer, while the selected quartz materials help form the surface profile and interlayer bond.\u003c\/p\u003e\n\u003ch2 id=\"bridge-data\"\u003e\u003cstrong\u003eSystem technical performance\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe technical performance for the specified build-up on concrete is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDry waterproofing layer thickness: ≥ 2 mm.\u003c\/li\u003e\n\u003cli\u003eTensile bond strength: ≥ 1 N\/mm².\u003c\/li\u003e\n\u003cli\u003eShear strength with asphalt concrete: ≥ 0.4 N\/mm².\u003c\/li\u003e\n\u003cli\u003eWater absorption: ≤ 2%.\u003c\/li\u003e\n\u003cli\u003eDynamic water loading: passes the test.\u003c\/li\u003e\n\u003cli\u003eCrack bridging: maintains watertightness after testing at a temperature ≤ −10°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bond strength of the applied system and the tensile strength of the concrete surface are different properties. Crack-bridging performance does not replace an expansion-joint detail designed to accommodate structural movement.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eConcrete substrate requirements\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, dry and clean, with an open-textured surface. Remove cement laitance, weak material, dust, oil and remnants of previous coatings. Repair voids, irregularities and damaged edges before applying the system.\u003c\/p\u003e\n\u003cp\u003eConcrete requirements for ELASTOMASTIC TFN include a minimum compressive strength of 25 N\/mm², an average surface tensile strength of at least 1.5 N\/mm² and residual moisture not exceeding 4% by the CM method. Concrete moisture and relative air humidity are measured separately.\u003c\/p\u003e\n\u003cp\u003eFalls and drainage must direct water towards the intended outlets. The waterproofing layer follows the prepared surface; it should not be used arbitrarily to compensate for major defects or incorrect falls.\u003c\/p\u003e\n\u003ch2 id=\"bridge-application\"\u003e\u003cstrong\u003eBridge waterproofing application sequence\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cstrong\u003eAssessment and preparation.\u003c\/strong\u003e Inspect the concrete, falls, cracks, kerbs, joints and drainage outlets. Prepare mechanically to a sound, textured substrate and remove dust. After wet preparation, allow drying and measure the residual moisture.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLocal repairs.\u003c\/strong\u003e Repair defects and form transitions using compatible materials. Select \u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003econcrete repair mortars\u003c\/a\u003e for the depth and function of the repair.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePriming.\u003c\/strong\u003e Mix MBC-VT 116 at a base-to-hardener ratio of 3:1 by weight. Distribute evenly without pooling and apply the specified quartz broadcast.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePreparing the coating.\u003c\/strong\u003e Mix ELASTOMASTIC TFN at A:B = 40:60 by weight for at least 3 minutes. Transfer to a clean container and briefly mix again. Do not thin the material.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplication and broadcasting.\u003c\/strong\u003e Spread with a trowel, serrated trowel or squeegee, use a spiked roller and broadcast within the application window. Remove unbound aggregate after curing.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChecks before asphalt.\u003c\/strong\u003e Verify continuity, thickness, adhesion, details and surface condition. Start subsequent work when the system has reached the required readiness.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003e\u003cstrong\u003eTemperature, working time and curing\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMBC-VT 116 requires air and substrate temperatures of +8 to +30°C, relative humidity no higher than 75%, and a substrate at least 3°C above the dew point. Working time is approximately 35 minutes at +20°C and 50% relative humidity.\u003c\/p\u003e\n\u003cp\u003eELASTOMASTIC TFN requires a substrate temperature of +10 to +40°C, at least 3°C above the dew point, material temperature above +20°C and relative air humidity below 85%. Pot life is approximately 1 hour at +20°C. Check the conditions separately for each application stage.\u003c\/p\u003e\n\u003cp\u003eAt +20°C, the indicative walkable time for ELASTOMASTIC TFN is 12 hours for a 4–10 mm layer. Final cure is approximately 1 week, depending on thickness and temperature. These timings do not automatically define when asphalt can be laid over the bridge system with a 2 mm layer. That decision depends on the application procedure, site conditions and checks before the next layer.\u003c\/p\u003e\n\u003ch2 id=\"bridge-consumption\"\u003e\u003cstrong\u003eMaterial consumption and quantities\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMBC-VT 116 consumption as a primer is approximately 0.4–0.5 kg\/m². Concrete absorption and texture affect the actual quantity. Sealing and scratch coating require different quantities and must not be treated as a single priming coat.\u003c\/p\u003e\n\u003cp\u003eELASTOMASTIC TFN quantities depend on the design thickness, exact build-up and its consumption rate. Calculate resin, any filler mixed into it and surface broadcast separately. The starting calculation is area × consumption for each layer, allowing separately for details, irregularities and application losses.\u003c\/p\u003e\n\u003cp\u003ePrimer-only example: 100 m² at 0.4–0.5 kg\/m² requires a theoretical 40–50 kg before application losses. With a 30 kg pack size, this means two packs. The calculation excludes the waterproofing coating, quartz and substrate repairs.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKerbs, drains, joints and critical details\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe coating needs continuous transitions to drainage elements and termination areas. Connections at kerbs, outlets, edges and work interruptions require particular attention. Outlets must drain from the intended level without leaving pockets of standing water.\u003c\/p\u003e\n\u003cp\u003eAssess active cracks and expansion joints according to their movement. Select \u003ca href=\"\/en\/collections\/хидроизолация-за-фуги\"\u003ejoint waterproofing solutions\u003c\/a\u003e as separate details compatible with the bridge system. Checks include complete coverage, thickness, even broadcasting, adhesion, and the absence of blisters, missed areas and contamination.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eConcrete deck, steel bridge or exposed coating?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis page describes a concrete bridge deck with asphalt concrete surfacing. ELASTOMASTIC TFN also has applications on steel, inspection sidewalks, pedestrian and cycle areas, and ballast troughs. Their preparation, primer, thickness and aggregate grading may differ.\u003c\/p\u003e\n\u003cp\u003eSteel substrates require corrosion protection and the corresponding metal preparation. Directly trafficked coatings have requirements for wear and slip resistance. Bituminous bridge membranes use a different application method and their own details. Selection begins with the structure and intended use, rather than the resin type alone.\u003c\/p\u003e\n\u003ch2 id=\"bridge-price\"\u003e\u003cstrong\u003eBridge waterproofing price and technical selection\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePrice per m² depends on area, substrate preparation, repairs, design thickness, quartz materials and the number of complex details. A pack price for primer or coating is different from the cost of the complete waterproofing system. Compare options using the same build-up and scope of work.\u003c\/p\u003e\n\u003cp\u003eTo determine products and quantities, provide the area, substrate type and condition, design build-up, falls and drainage, joint details and planned surfacing. \u003ca href=\"\/en\/pages\/contact\"\u003eSend a technical enquiry for bridge waterproofing\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProducts and technical information\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/mbc-vt-116-termoustoychiva-epoksidna-smola-30-kg\"\u003eMBC-VT 116 — characteristics and 30 kg pack.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/elastomastic-tfn-sherwin-williams\"\u003eElastomastic™ TFN — characteristics, 20 kg pack and technical documents.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sherwin-williams-elastomastic-tfn-pds-en.pdf?v=1791718462\"\u003eElastomastic™ TFN product data sheet, English PDF.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eWaterproofing by application\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","products":[{"product_id":"mbc-vt-116-termoustoychiva-epoksidna-smola-30-kg","title":"MBC-VT 116 – термоустойчива епоксидна смола \/ 30 кг","description":"\u003cp\u003e\u003cstrong\u003eMBC-VT 116\u003c\/strong\u003e е двукомпонентна, червено-прозрачна и термоустойчива епоксидна смола без разтворители за грундиране, шпакловане и хидроизолиране на бетонни повърхности.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eГрундиране, шпакловане или хидроизолиране на пътни плочи съгласно ZTV-ING, част 6.\u003c\/li\u003e\n\u003cli\u003eХидроизолиране на паркинг етажи, рампи и канали в одобрени системи.\u003c\/li\u003e\n\u003cli\u003eСистеми за възстановяване на бетон с полимерен бетон съгласно TL BE-PC.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eДвукомпонентна, червено-прозрачна епоксидна смола без разтворители.\u003c\/li\u003e\n\u003cli\u003eЕлектрическо съпротивление над 500 мегаома.\u003c\/li\u003e\n\u003cli\u003eМоже да се нанася върху бетон на възраст над 7 дни съгласно TL\/TP BEL-EP.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e5012001 036 1095\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e30 кг комплект\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eСъотношение на смесване\u003c\/th\u003e\n\u003ctd\u003e3 : 1 основа : втвърдител по тегло\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eВреме за обработка\u003c\/th\u003e\n\u003ctd\u003eПриблизително 35 min при 20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003e+8 °C до +30 °C; относителна влажност до 75 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦвят\u003c\/th\u003e\n\u003ctd\u003eЧервено-прозрачен\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152001278276,"sku":"5012001 036 1095","price":398.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/mc-bauchemie-mbc-vt-116-epoxy-primer.jpg?v=1791722145"},{"product_id":"elastomastic-tfn-sherwin-williams","title":"Elastomastic™ TFN, 20 kg","description":"\u003cp\u003e\u003cstrong\u003eElastomastic™ TFN by Sherwin-Williams\u003c\/strong\u003e is a two-component epoxy-polyurethane protective coating for steel and concrete. It forms a tough elastic, wear-resistant layer for bridge decks, inspection walkways, pavements, cycle tracks, traffic areas and railway ballast troughs. The A+B kit contains \u003cstrong\u003e20 kg\u003c\/strong\u003e in dust grey, approximately RAL 7037.\u003c\/p\u003e\n\u003ch2\u003eProtection under mechanical load\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHigh mechanical and impact resistance.\u003c\/li\u003e\u003cli\u003eGood adhesion to correctly prepared steel and concrete.\u003c\/li\u003e\u003cli\u003eCorrosion protection for steel surfaces.\u003c\/li\u003e\u003cli\u003eAnti-slip finish when installed with the specified mineral aggregate and broadcast material.\u003c\/li\u003e\u003cli\u003eSuitable for levelling and forming falls to reduce standing water.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eProduct code\u003c\/th\u003e\u003ctd\u003e595561\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBinder\u003c\/th\u003e\u003ctd\u003eTwo-component epoxy-polyurethane resin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eA+B kit\u003c\/th\u003e\u003ctd\u003e20 kg; approximately 15.3 L mixed, without mineral aggregate\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003eDust grey, approximately RAL 7037\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eA:B mixing ratio\u003c\/th\u003e\u003ctd\u003e40:60 by weight\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eDensity without aggregate\u003c\/th\u003e\u003ctd\u003eApproximately 1.3 kg\/L\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eSolids\u003c\/th\u003e\u003ctd\u003e100 ± 2% by volume and weight\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eShelf life\u003c\/th\u003e\u003ctd\u003e2 years from manufacture in original sealed containers, stored cool and dry\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRole within the system\u003c\/h2\u003e\u003cp\u003eElastomastic TFN is the protective coating layer, not a primer or a complete bridge waterproofing kit. Steel bridge systems combine it with Macropoxy® HM Primer Plus and the specified mineral aggregate\/broadcast material. Acrolon® EG-5 may be used as a coloured top sealer where the system specifies it. The technical data sheet describes a separate concrete system with Resuprime™ ST. Primers, aggregates and finishing coats are supplied separately.\u003c\/p\u003e\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\u003cp\u003eThe substrate must be sound, dry and clean. Steel requires abrasive blast cleaning to Sa 2½, with the surface profile selected for the system. Concrete requires at least 25 N\/mm² compressive strength, an average tensile adhesion strength of at least 1.5 N\/mm² and residual moisture no higher than 4% by the CM method.\u003c\/p\u003e\u003cp\u003eMechanically mix the components until homogeneous, then incorporate the specified aggregate. Apply with a trowel, serrated trowel or squeegee. Do not thin the material. Film thickness, consumption, application conditions and recoating intervals depend on the selected system and technical data sheet.\u003c\/p\u003e\n\u003ch2\u003ePrice and quotation\u003c\/h2\u003e\u003cp\u003ePrice on request for the 20 kg kit. Include the area, substrate, loading, specified system, quantity and required delivery date. Availability and delivery are confirmed in the quotation. Browse \u003ca href=\"\/en\/collections\/mostova-hidroizolatsionna-sistema\"\u003ebridge waterproofing and system components\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/sherwin-williams-produkti\"\u003eSherwin-Williams products\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor professional use. Selection and installation must follow the project specification, applicable requirements, current technical data sheets and safety data sheets.\u003c\/p\u003e\u003ch2\u003eTechnical documents\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sherwin-williams-elastomastic-tfn-pds-en.pdf?v=1791718462\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet (EN, PDF)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sherwin-williams-elastomastic-tfn-dop-en.pdf?v=1791718468\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Performance (EN, PDF)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sherwin-williams-elastomastic-tfn-sds-a-en.pdf?v=1791718478\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet – component A (EN, PDF)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sherwin-williams-elastomastic-tfn-sds-b-en.pdf?v=1791718485\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet – component B (EN, PDF)\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sherwin-williams-bridge-systems-en.pdf?v=1791718493\" target=\"_blank\" rel=\"noopener\"\u003eSteel bridge deck coating systems (EN, PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Sherwin-Williams","offers":[{"title":"Default Title","offer_id":57446565216580,"sku":"595561","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/sherwin-williams-elastomastic-tfn-20-kg.jpg?v=1791718500"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/collections\/mostova-hidroizolatsionna-sistema.webp?v=1791720519","url":"https:\/\/stroitelna-himia.bg\/en\/collections\/mostova-hidroizolatsionna-sistema.oembed","provider":"Строителна Химия","version":"1.0","type":"link"}