{"title":"Materials for Anchoring","description":"\u003ch2\u003eХимически анкери Sika AnchorFix за бетон, зидария и арматура\u003c\/h2\u003e\n\u003cp\u003eВ тази категория са събрани Sika AnchorFix системи за химическо анкериране на шпилки, болтове, армировъчни пръти и крепежни елементи. Изборът не трябва да се прави само по цена, а според основата, натоварването, температурата, отвореното време, вида на анкера и дали обектът изисква ETA\/сеизмично или друго проектно одобрение.\u003c\/p\u003e\n\u003cp\u003eАко търсите \u003cstrong\u003eхимически анкер\u003c\/strong\u003e за бърз монтаж, стандартно анкериране, тежко натоварване или влажен\/напукан бетон, сравнете продуктите по-долу. При конструктивни и критични закрепвания винаги проверявайте проекта, техническия лист и таблиците за оразмеряване.\u003c\/p\u003e\n\u003ch2\u003eКак да изберете Sika AnchorFix\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eПродукт\u003c\/th\u003e\n      \u003cth\u003eНай-подходящ за\u003c\/th\u003e\n      \u003cth\u003eКлючова разлика\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e\u003c\/td\u003e\n      \u003ctd\u003eБързо анкериране на шпилки, болтове и крепежни елементи в бетон, плътна\/куха зидария и камък.\u003c\/td\u003e\n      \u003ctd\u003e2-компонентно полиестерно лепило без стирол; кратко отворено време и бързо втвърдяване.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e\u003c\/td\u003e\n      \u003ctd\u003eСредно и тежко натоварване, арматура, шпилки, болтове, бетон с и без пукнатини.\u003c\/td\u003e\n      \u003ctd\u003eЕпокси-акрилатна система с ETA, висока носимоспособност и сеизмично изпитване C1.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e\u003c\/td\u003e\n      \u003ctd\u003eТежки структурни закрепвания, напукан\/ненапукан сух или влажен бетон, арматура и шпилки.\u003c\/td\u003e\n      \u003ctd\u003eВисокоефективна епоксидна система с дълго отворено време и сеизмично изпитване C1\/C2.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e\u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix Perforated Sleeves\u003c\/a\u003e\u003c\/td\u003e\n      \u003ctd\u003eКуха зидария и кухи тухли, когато смолата трябва да се разпредели контролирано около анкера.\u003c\/td\u003e\n      \u003ctd\u003eПерфорирани втулки за по-добро закотвяне и по-ниски загуби на анкериращ материал.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eПрактически правила преди покупка\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eЗа неносещи и бързи монтажи\u003c\/strong\u003e често е достатъчен AnchorFix-1, ако основата и натоварването са в допустимите параметри.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eЗа средно и тежко натоварване\u003c\/strong\u003e започнете от AnchorFix-2+, особено при бетон с пукнатини, арматура и проектни изисквания.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eЗа критични конструктивни приложения\u003c\/strong\u003e и влажен\/напукан бетон обикновено се гледа AnchorFix-3030, защото е епоксидна система с по-дълго отворено време.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eЗа кухи тухли и куха зидария\u003c\/strong\u003e използвайте перфорирани втулки, за да ограничите загубите и да получите правилно разпределение на смолата.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eЧесто задавани въпроси\u003c\/h2\u003e\n\u003ch3\u003eКой Sika AnchorFix е най-силен?\u003c\/h3\u003e\n\u003cp\u003eНе е коректно да се избира само по „най-силен“. AnchorFix-3030 е епоксидната система за най-тежки и критични приложения, но AnchorFix-2+ може да е по-практичният избор за много средни и тежки закрепвания. AnchorFix-1 е бързото решение за по-стандартни монтажи.\u003c\/p\u003e\n\u003ch3\u003eМога ли да използвам химически анкер в кухи тухли?\u003c\/h3\u003e\n\u003cp\u003eДа, но трябва да използвате подходяща перфорирана втулка и да следвате техническия лист. При куха зидария втулката помага смолата да остане около анкера, вместо да се загуби в кухините.\u003c\/p\u003e\n\u003ch3\u003eЗащо почистването на отвора е толкова важно?\u003c\/h3\u003e\n\u003cp\u003eПрах, масла, ронещи се частици и влага извън допустимите условия могат да намалят сцеплението. При химическо анкериране подготовката на отвора е част от носимоспособността, не козметична стъпка.\u003c\/p\u003e\n","products":[{"product_id":"sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane","title":"Sika AnchorFix®-2+ - Chemical Anchor for Medium and Heavy Loads","description":"\u003ch2\u003eSika AnchorFix-2+ for Medium and Heavy Loads\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-2+\u003c\/strong\u003e is a 2-component anchoring adhesive based on epoxy-acrylate, solvent-free and styrene-free. It is intended for normal and moderate climatic conditions and is used for anchoring reinforcing steel, threaded rods, bolts and special fastening systems.\u003c\/p\u003e\n\u003cp\u003eAnchorFix-2+ is the right choice when you need a chemical anchor for \u003cstrong\u003emedium and heavy loads\u003c\/strong\u003e, cracked or uncracked concrete, solid masonry, steel, hard natural stone or solid rock. According to the technical data sheet, the product has ETA for anchoring in concrete and for post-installed rebar, as well as seismic testing C1.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-2+\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAnchoring threaded rods, bolts, reinforcing bars and special fastening systems.\u003c\/li\u003e\n  \u003cli\u003eMedium and heavy-duty fixings in cracked and uncracked concrete.\u003c\/li\u003e\n  \u003cli\u003eInstallations where it is important that the adhesive does not sag when working overhead.\u003c\/li\u003e\n  \u003cli\u003eProjects with design requirements for ETA, post-installed rebar or seismic testing C1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Reference Data\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component epoxy-acrylate anchoring adhesive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 10 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 70 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +30 °C during application\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom -5 °C to +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 5 minutes \/ 50 minutes at +20 °C to +25 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e300 ml, 550 ml and 850 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAdvantages for Professional Installation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh load-bearing capacity and fast curing.\u003c\/li\u003e\n  \u003cli\u003eSuitable for cracked concrete.\u003c\/li\u003e\n  \u003cli\u003eApproved for contact with drinking water according to the WRAS approval stated in the TDS.\u003c\/li\u003e\n  \u003cli\u003eStyrene-free, low odour and low wastage.\u003c\/li\u003e\n  \u003cli\u003eNo transport restrictions according to the technical data sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant Application Conditions\u003c\/h2\u003e\n\u003cp\u003eThe substrate must have verified load-bearing capacity, and the anchor hole must be clean, dry and free from oil, grease and loose or crumbling particles. Concrete and mortar must be more than 28 days old, unless the design and technical dimensioning specify otherwise.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-3030\u003c\/h2\u003e\n\u003cp\u003eIf the project is structurally critical, the concrete is damp or an epoxy system with a long open time is required, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e. For faster standard installations with lower requirements, see \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-2+ suitable for cracked concrete?\u003c\/h3\u003e\n\u003cp\u003eYes. The technical data sheet states that the product is suitable for cracked concrete, with final dimensioning to be carried out according to the project design and anchoring tables.\u003c\/p\u003e\n\u003ch3\u003eCan it be used at low temperature?\u003c\/h3\u003e\n\u003cp\u003eYes, the substrate temperature can be from -5 °C to +30 °C, but the cartridge must be at least +5 °C and the curing time changes depending on the temperature.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference compared with AnchorFix-1?\u003c\/h3\u003e\n\u003cp\u003eAnchorFix-1 is a faster standard polyester-based solution. AnchorFix-2+ is an epoxy-acrylate system for medium and heavy loads, cracked\/uncracked concrete and higher design requirements.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-anchorfix2\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Solutions for AnchorFix®-2+\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e AnchorFix-2+ is a strong, versatile choice for medium and heavy loads. If the project requires a long open time, very heavy structural fixing or specific work in damp concrete, compare it with the epoxy AnchorFix-3030.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the category, see \u003ca href=\"\/en\/collections\/materiali-za-ankerirane\"\u003eanchoring materials\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor heavy-duty epoxy fixings, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix®-3030\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor faster, lighter fixings, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix®-1\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"300 ml - 12pcs","offer_id":48728746524996,"sku":"592691","price":165.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/anchorfix2_-Ankerirashtolepilozasrednoitezhkonatovarvane.webp?v=1719418473"},{"product_id":"sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo","title":"Sika AnchorFix®-1 - Fast-Curing Chemical Anchor","description":"\u003ch2\u003eSika AnchorFix-1 for Fast Chemical Anchoring\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-1\u003c\/strong\u003e is a 2-component, styrene-free and solvent-free polyester anchoring adhesive. It is used as a fast-curing chemical anchor for reinforcing bars, threaded rods, bolts and other fixing systems in concrete, solid and hollow masonry, hard natural stone and solid rock.\u003c\/p\u003e\n\u003cp\u003eIt is a practical choice where fast installation with a short open time is required. For different types of stone and masonry, the technical data sheet requires a trial area, because substrates can vary in strength, composition and porosity.\u003c\/p\u003e\n\u003ch2\u003eWhen to Choose AnchorFix-1\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFast anchoring of threaded rods, bolts and fixing elements.\u003c\/li\u003e\n  \u003cli\u003eInstallation in concrete, solid masonry, hollow masonry and hard natural stone.\u003c\/li\u003e\n  \u003cli\u003eApplications where it is important that the adhesive does not sag during overhead installation.\u003c\/li\u003e\n  \u003cli\u003eProjects where a standard cartridge and application with a standard dispensing gun are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Guidance\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component polyester anchoring adhesive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 10 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 60 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C during application\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom -10 °C to +40 °C; application at -10 °C is not stated in the ETA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 5 minutes \/ 50 minutes at +20 °C to +25 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e150 ml, 300 ml and 550 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eImportant Conditions for Reliable Anchoring\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe hole must be clean, dry and free from oils, grease, dust and loose particles.\u003c\/li\u003e\n  \u003cli\u003eThreaded rods and reinforcing bars must be cleaned of oils, dust and other contamination.\u003c\/li\u003e\n  \u003cli\u003eThe ambient temperature must be at least 3 °C above the dew point to avoid condensation.\u003c\/li\u003e\n  \u003cli\u003eFor hollow masonry, use \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix perforated sleeves\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eComparison with AnchorFix-2+ and AnchorFix-3030\u003c\/h2\u003e\n\u003cp\u003eIf the project requires medium\/heavy loads, cracked concrete, ETA for concrete and higher load-bearing capacity, see \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e. For epoxy anchoring in dry or damp concrete, long open time and heavy-duty structural fixings, see \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-1 suitable for hollow bricks?\u003c\/h3\u003e\n\u003cp\u003eYes, but a suitable perforated sleeve must be used and the instructions for cleaning, filling and inserting the anchor must be followed.\u003c\/p\u003e\n\u003ch3\u003eHow quickly does it cure?\u003c\/h3\u003e\n\u003cp\u003eAt +20 °C to +25 °C, the technical data sheet gives an open time of approx. 5 minutes and a curing time of approx. 50 minutes. At lower temperatures, the process slows down.\u003c\/p\u003e\n\u003ch3\u003eCan it be used overhead?\u003c\/h3\u003e\n\u003cp\u003eYes. According to the technical data sheet, the product does not sag even during overhead installation when applied correctly.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"300 ml - 12pcs","offer_id":48790269690180,"sku":"497848","price":132.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaAnchorFix_-1-Barzovtvardyavashtoankerirashtolepilo.webp?v=1718631829"},{"product_id":"sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo","title":"Sika AnchorFix®-3030 - epoxy chemical anchor for heavy loads","description":"\u003ch2\u003eSika AnchorFix-3030 for heavy-duty epoxy anchoring\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix-3030\u003c\/strong\u003e is a 2-component, thixotropic, high-performance anchoring adhesive based on epoxy resin. It is used for anchoring threaded rods and reinforcing bars in cracked and non-cracked, dry or damp concrete.\u003c\/p\u003e\n\u003cp\u003eThis is the most suitable AnchorFix choice for heavy-duty and structurally critical fixings where an epoxy chemical base, high load-bearing capacity, long open time, C1\/C2 seismic testing and reliable performance in refurbishment or new construction are required.\u003c\/p\u003e\n\u003ch2\u003eWhen to choose AnchorFix-3030\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAnchoring reinforcing steel in refurbishment and new construction.\u003c\/li\u003e\n  \u003cli\u003eThreaded rods, bolts and special fastening systems under heavy loads.\u003c\/li\u003e\n  \u003cli\u003eFixing handrails, balustrades, railings, supports, rails, window and door frames.\u003c\/li\u003e\n  \u003cli\u003eCracked and non-cracked concrete, including dry or damp concrete.\u003c\/li\u003e\n  \u003cli\u003eProjects requiring a longer open time than fast-curing AnchorFix systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical guide values\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth\u003eChemical base\u003c\/th\u003e\n      \u003ctd\u003e2-component epoxy resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eMixing ratio\u003c\/th\u003e\n      \u003ctd\u003eComponent A : Component B = 3 : 1 by volume\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eCompressive strength\u003c\/th\u003e\n      \u003ctd\u003eApprox. 95 N\/mm² after 7 days at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProduct temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +10 °C to +40 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSubstrate temperature\u003c\/th\u003e\n      \u003ctd\u003eFrom +5 °C to +40 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003eOpen time \/ curing\u003c\/th\u003e\n      \u003ctd\u003eApprox. 18 minutes \/ 8 hours at +20 °C to +25 °C; up to 300 minutes \/ 24 hours at +5 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth\u003ePackaging according to TDS\u003c\/th\u003e\n      \u003ctd\u003e300 ml, 385 ml and 585 ml cartridges\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eAdvantages for structural applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLong open time for more controlled work on complex details.\u003c\/li\u003e\n  \u003cli\u003eCan be used in damp concrete.\u003c\/li\u003e\n  \u003cli\u003eETA for anchoring in cracked concrete and ETA for post-installed rebar.\u003c\/li\u003e\n  \u003cli\u003eTested for seismic loading C1 and C2.\u003c\/li\u003e\n  \u003cli\u003eCures without shrinkage and has high adhesion to the substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eImportant before installation\u003c\/h2\u003e\n\u003cp\u003eThe anchor hole must always be clean, dry, free from oils, grease and loose particles, except where the specific application permits damp concrete according to the technical data sheet and the design. Threaded rods and reinforcing bars must be cleaned of dust, oil, corrosion and other contaminants.\u003c\/p\u003e\n\u003cp\u003eFor hollow masonry, use \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix perforated sleeves\u003c\/a\u003e. If you need a faster solution for more standard anchoring, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e or \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs AnchorFix-3030 suitable for damp concrete?\u003c\/h3\u003e\n\u003cp\u003eYes. The technical data sheet specifies use for threaded rods and reinforcing bars in cracked and non-cracked, dry or damp concrete.\u003c\/p\u003e\n\u003ch3\u003eWhy is open time important?\u003c\/h3\u003e\n\u003cp\u003eFor more complex or structural anchors, the long open time provides greater control during injection, positioning and installation of the anchor, especially at lower temperatures.\u003c\/p\u003e\n\u003ch3\u003eCan it be used with a standard gun?\u003c\/h3\u003e\n\u003cp\u003eThe technical data sheet states that the 300 ml cartridge can be applied with a standard applicator gun. For other cartridge sizes, check the required gun and mixing nozzle.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-anchorfix3030\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for AnchorFix®-3030\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e AnchorFix-3030 is the right choice for heavy-duty and structurally critical fixings where an epoxy chemical base, long open time and work in dry or damp concrete are required. For faster or lighter-duty tasks, another AnchorFix product may be sufficient.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the full selection of anchoring products, see \u003ca href=\"\/en\/collections\/materiali-za-ankerirane\"\u003eanchoring materials\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor medium and heavy loads with epoxy acrylate, compare with \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix®-2+\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor hollow masonry and bricks, see \u003ca href=\"\/en\/products\/perforirani-vtulki-za-sika-anchorfix\"\u003eSika AnchorFix® perforated sleeves\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"585 ml - 12pcs","offer_id":48790530621764,"sku":"724684","price":541.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/anchorfix2_-Ankerirashtolepilozasrednoitezhkonatovarvane.webp?v=1719418473"},{"product_id":"perforirani-vtulki-za-sika-anchorfix","title":"Sika AnchorFix® Perforated Sleeves – for hollow masonry","description":"\u003ch2\u003eSika AnchorFix Perforated Sleeves for hollow masonry and hollow bricks\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSika AnchorFix Perforated Sleeves\u003c\/strong\u003e are plastic perforated sleeves for anchoring in hollow bricks and hollow masonry in combination with Sika AnchorFix chemical anchors. The sleeve helps the resin distribute around the anchor and pass through the perforations, instead of being lost uncontrollably into the voids.\u003c\/p\u003e\n\u003cp\u003eUse them when working with hollow masonry, hollow bricks, or substrates where standard direct resin injection does not provide proper encapsulation of the anchor. This is an accessory for the AnchorFix system, not a stand-alone anchor.\u003c\/p\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy and fast installation.\u003c\/li\u003e\n  \u003cli\u003eImproved anchoring in hollow masonry.\u003c\/li\u003e\n  \u003cli\u003eLower loss of anchoring material.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with Sika AnchorFix systems according to the relevant product approvals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSizes according to the technical data sheet\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eLength\u003c\/th\u003e\n      \u003cth\u003eDiameter\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e50 mm\u003c\/td\u003e\n      \u003ctd\u003e12 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e85 mm\u003c\/td\u003e\n      \u003ctd\u003e16 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e85 mm\u003c\/td\u003e\n      \u003ctd\u003e20 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e130 mm\u003c\/td\u003e\n      \u003ctd\u003e16 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDrill the hole and clean it of dust and contaminants.\u003c\/li\u003e\n  \u003cli\u003eInsert the perforated sleeve into the hole.\u003c\/li\u003e\n  \u003cli\u003eFill the sleeve with a suitable Sika AnchorFix adhesive, starting from the bottom.\u003c\/li\u003e\n  \u003cli\u003eClose the cap when required to prevent resin leakage.\u003c\/li\u003e\n  \u003cli\u003eInsert the anchor with a twisting motion within the open time of the adhesive.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCompatible products\u003c\/h2\u003e\n\u003cp\u003eThe sleeves are used with chemical anchors from the Sika AnchorFix system. For fast standard installations, see \u003ca href=\"\/en\/products\/sika-anchorfix-1-barzovtvardyavashto-ankerirashto-lepilo\"\u003eSika AnchorFix-1\u003c\/a\u003e. For medium and heavy loads, see \u003ca href=\"\/en\/products\/sika-anchorfix-2-ankerirashto-lepilo-za-sredno-i-tezhko-natovarvane\"\u003eSika AnchorFix-2+\u003c\/a\u003e. For epoxy anchoring in heavy-duty and structural applications, see \u003ca href=\"\/en\/products\/sika-anchorfix-3030-visokoefektivno-epoksidno-ankerirashto-lepilo\"\u003eSika AnchorFix-3030\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs a sleeve required for hollow bricks?\u003c\/h3\u003e\n\u003cp\u003eYes. For hollow bricks and hollow masonry, the sleeve is the correct system accessory. It retains and distributes the resin around the anchor.\u003c\/p\u003e\n\u003ch3\u003eCan it be used with any chemical anchor?\u003c\/h3\u003e\n\u003cp\u003eUse the sleeves with Sika AnchorFix anchoring compounds and always check the relevant product technical data sheet\/approval.\u003c\/p\u003e\n\u003ch3\u003eWhat colour are the sleeves?\u003c\/h3\u003e\n\u003cp\u003eAccording to the technical data sheet, the sleeves are white plastic sleeves.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"12\/50 - 100 pcs.","offer_id":48824003199300,"sku":"152380","price":44.28,"currency_code":"EUR","in_stock":true},{"title":"16\/130 - 100 pcs.","offer_id":48824003232068,"sku":"531101","price":55.08,"currency_code":"EUR","in_stock":true},{"title":"16\/85 - 100 pcs.","offer_id":48824003264836,"sku":"531100","price":49.68,"currency_code":"EUR","in_stock":true},{"title":"20\/85 - 100 pcs.","offer_id":48824003297604,"sku":"152381","price":55.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/PerforiranivtulkizaSikaAnchorFix.webp?v=1719919763"}],"url":"https:\/\/stroitelna-himia.bg\/en\/collections\/materiali-za-ankerirane.oembed","provider":"Строителна Химия","version":"1.0","type":"link"}