{"title":"Foundation and Structure Waterproofing","description":"\u003cp\u003eChoose foundation and structure waterproofing according to the concrete or masonry, water exposure and access. Below-ground walls, foundation slabs and water-related structures require assessment of joints, penetrations and protection of completed layers.\u003c\/p\u003e\u003ch2\u003eMoisture, water and design details\u003c\/h2\u003e\u003cp\u003eEstablish water direction and pressure, substrate condition and the wall-to-slab connection. A classification or use for one area does not automatically transfer to a tank, pool or negative water pressure.\u003c\/p\u003e\u003ch2\u003eBituminous and other system solutions\u003c\/h2\u003e\u003cp\u003eNafuflex Basic 1 and Easy Tech 1 are bituminous waterproofing products beneath protective layers. MC-Proof DF 10 has applications for basement walls, foundation slabs and foundations. Compare Igolflex and other products by the exact data sheet and water exposure.\u003c\/p\u003e\u003ch2\u003eProtection before backfilling\u003c\/h2\u003e\u003cp\u003ePlan necessary protective and drainage components together with the membrane. Follow drying and subsequent-work requirements. Do not conceal damaged waterproofing with backfill without assessment and repair.\u003c\/p\u003e\u003ch2\u003eProduct examples from the catalogue\u003c\/h2\u003e\u003cp\u003eEach product has its own intended use and system limitations. Review the exact descriptions and data sheets:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/sikatop-seal-107-%D1%86%D0%B8%D0%BC%D0%B5%D0%BD%D1%82%D0%BE-%D0%BF%D0%BE%D0%BB%D0%B8%D0%BC%D0%B5%D1%80%D0%BD%D0%B0-%D1%85%D0%B8%D0%B4%D1%80%D0%BE%D0%B8%D0%B7%D0%BE%D0%BB%D0%B0%D1%86%D0%B8%D1%8F\"\u003eSikaTop® Seal-107\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/sikatop-seal-107-elastik-elastichna-tsimentova-hidroizolatsia\"\u003eSikaTop® Seal-107 Elastik\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101 DE\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/sika-mono-plug-barzosvarzvasht-tsimentov-raztvor-za-spirane-na-techove\"\u003eSika® Mono Plug\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/sika-monotop-120-seal-ednokomponentna-tsimentova-hidroizolatsia-za-beton-i-zidaria\"\u003eSika MonoTop®-120 Seal\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/nafuflex-basic-1-bitumna-hidroizolatsiya-30-l\"\u003eNafuflex Basic 1\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/nafuflex-easy-tech-1-praskaema-bitumna-hidroizolatsiya-30-l\"\u003eNafuflex Easy Tech 1\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/mc-proof-df-10-dispersna-hidroizolatsiya-2-5-kg\"\u003eMC-Proof DF 10\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/mc-proof-df-10-dispersna-hidroizolatsiya-10-kg\"\u003eMC-Proof DF 10\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eRelated categories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eWaterproofing for Roofs, Terraces, Foundations and Joints\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/хидроизолация-за-фуги\"\u003eJoint Waterproofing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003eConcrete Repair Mortars\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/en\/pages\/contact\"\u003eSend a technical enquiry\u003c\/a\u003e with the area, photographs, substrate and service conditions.\u003c\/p\u003e","products":[{"product_id":"sika-igolflex-p-01-grund","title":"Sika® Igolflex® P-01 DE - Bituminous Primer for Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSika® Igolflex® P-01 DE\u003c\/strong\u003e is a ready-to-use \u003cstrong\u003ewater-based bituminous primer\u003c\/strong\u003e designed for substrate preparation before thick-layer bituminous coatings and bituminous sheet membranes. It is used to improve adhesion and consolidate the substrate in Igolflex and other bituminous waterproofing systems.\u003c\/p\u003e\n\n\u003ch2\u003eWhere is Sika® Igolflex® P-01 DE used?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn concrete\u003c\/strong\u003e - before polymer-bitumen coatings and bituminous membranes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn mortars and masonry\u003c\/strong\u003e - when the substrate needs to be prepared and made uniform before waterproofing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn wood\u003c\/strong\u003e - where the system and technical detail allow such use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAs a system primer\u003c\/strong\u003e - before \u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101 DE\u003c\/a\u003e and other suitable bituminous coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cp\u003eAccording to the technical data sheet, the product can be applied by brush, roller or airless spray, has good adhesion to dry and slightly damp substrates, is easy to work with and provides good coverage. As a primer, it helps prepare the substrate for the next bituminous layer, but it does not replace the waterproofing membrane itself.\u003c\/p\u003e\n\n\u003ch2\u003eConsumption and conditions\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProperty\u003c\/th\u003e\n      \u003cth\u003eValue according to the TDS\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApproximate consumption as a primer\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.050 L\/m²; actual consumption depends on the porosity and profile of the substrate.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +30 °C.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate condition\u003c\/td\u003e\n      \u003ctd\u003eDry or slightly damp, homogeneous, free from dust, oils, weak particles and contamination.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e5 L or 10 L plastic pails.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use in contact with drinking water.\u003c\/li\u003e\n  \u003cli\u003eDo not use as an exposed coating under constant weathering and UV light.\u003c\/li\u003e\n  \u003cli\u003eDo not use under water pressure or permanent immersion in water.\u003c\/li\u003e\n  \u003cli\u003eBefore full application, create a test area if the substrate is highly porous or uncertain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor system selection, see \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eSika waterproofing\u003c\/a\u003e and \u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101 DE\u003c\/a\u003e. If you send the substrate type, area in square metres and photos, the approximate consumption can be calculated and it can be checked whether this primer is the correct choice for the system.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-2026-05-08-igolflexp01\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated bituminous waterproofing systems\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Igolflex P-01 DE is a primer, not a final waterproofing layer. It is used to prepare the substrate before compatible bituminous coatings and membranes, and it is not a solution for permanent UV exposure, water pressure or immersion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor bituminous roofing solutions, see \u003ca href=\"\/en\/collections\/rulonni-bitumni-hidroizolatsii-za-pokrivi\"\u003ebituminous sheet waterproofing membranes\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a thick-layer bituminous coating, compare with \u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a general selection by application, see \u003ca href=\"\/en\/collections\/hidroizolacia-produkti-sika\"\u003eSika waterproofing products\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"5 l","offer_id":55621754585412,"sku":"810226","price":32.4,"currency_code":"EUR","in_stock":true},{"title":"10 l.","offer_id":49291124441412,"sku":"810271","price":56.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SIKA_IGOLFLEX_P-01_DE.webp?v=1757655203"},{"product_id":"sika-igolflex-p-10-1-komponenten-bitumen-grund-na-osnovata-na-raztvoritel","title":"Sika® Igolflex® P-10 - Solvent-Based Bitumen Primer","description":"\u003cp\u003e\u003cstrong\u003eSika® Igolflex® P-10\u003c\/strong\u003e is a 1-component solvent-based bitumen primer for improving the adhesion of thick-layer bituminous coatings and bitumen membranes. It is used on concrete, mortar, masonry, wood and metal when the substrate needs to be consolidated and prepared for a bituminous system.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika Igolflex P-10?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Igolflex® P-10 when you need a \u003cstrong\u003esolvent-based bitumen primer\u003c\/strong\u003e for roof, foundation or below-ground bituminous waterproofing systems. It is suitable for porous substrates and can be applied on slightly damp substrates, but not on wet or very damp surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use 1-component bitumen primer.\u003c\/li\u003e\n  \u003cli\u003eShort drying time.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion and good penetration into porous substrates.\u003c\/li\u003e\n  \u003cli\u003eApplication by brush, roller or airless spray.\u003c\/li\u003e\n  \u003cli\u003eCan be applied on slightly damp substrates.\u003c\/li\u003e\n  \u003cli\u003eImproves adhesion to concrete, mortar, masonry, wood and metal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eSolvent-based bitumen primer\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eComposition\u003c\/td\u003e\n      \u003ctd\u003eBitumen and solvent\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging according to TDS\u003c\/td\u003e\n      \u003ctd\u003e5, 10, 20 and 200 l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eBlack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003e0.95 ± 0.05 kg\/l\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption on concrete, mortar and wood\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.35-0.50 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption on metal\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.20-0.30 kg\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDrying time\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2 hours at +23 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use in residential rooms or unventilated environments.\u003c\/li\u003e\n  \u003cli\u003eDo not apply on wet or very damp surfaces.\u003c\/li\u003e\n  \u003cli\u003eDo not mix with cement or water.\u003c\/li\u003e\n  \u003cli\u003eDo not use for waterproofing tanks, basements or channels exposed to water pressure.\u003c\/li\u003e\n  \u003cli\u003eDo not use on surfaces or tanks in contact with liquids for human consumption, including drinking water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send details of the substrate, area, whether it is dry or slightly damp, and which bitumen membrane or coating will be applied after the primer. This allows the actual consumption to be calculated and helps confirm whether P-10 is the correct primer.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"20 l.","offer_id":49291184472388,"sku":"600656","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaIgolflexP-10-1-komponentenbitumengrundnaosnovatanaraztvoritel.webp?v=1726848839"},{"product_id":"sika-igasol-bc-bitum-kauchukovo-pokritie-s-visoka-adhezia","title":"Sika® Igasol® BC - Bitumen-Rubber Protective Coating","description":"\u003cp\u003e\u003cstrong\u003eSika® Igasol® BC\u003c\/strong\u003e is a 1-component, water-based bitumen-rubber emulsion. After drying, it forms a strong, seamless and flexible coating for concrete structures, floor slabs, underground structures, foundations and retaining walls.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika Igasol BC?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Igasol® BC when an economical protective bitumen-rubber coating is required on concrete structures and underground elements. The product is suitable as a sandwich-type protective membrane in floor systems, for new construction or for surface treatment.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component, water-based bitumen-rubber emulsion.\u003c\/li\u003e\n  \u003cli\u003eExcellent adhesion to damp substrates.\u003c\/li\u003e\n  \u003cli\u003eSeamless coating without joints.\u003c\/li\u003e\n  \u003cli\u003eCan be applied on vertical and horizontal surfaces.\u003c\/li\u003e\n  \u003cli\u003eHigh resistance to aggressive salts and contaminated groundwater.\u003c\/li\u003e\n  \u003cli\u003eLow odor and drying without strong vapors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eBitumen-rubber based coating\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e15 L metal pail\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColor\u003c\/td\u003e\n      \u003ctd\u003eDark brown liquid, black after drying\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003eApprox. 1.00 kg\/L at +25 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 0.25-0.50 kg\/m² per coat, applied in 2-3 coats\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubstrate temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNext coat\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 5 hours at +35 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFull curing\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 3 days\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be uniform, dry and free from dust, oils, grease and loose particles. On warm and very dry porous concrete surfaces, the TDS allows priming by diluting Sika® Igasol® BC with clean water at a 1:1 ratio by weight. Two coats are recommended to avoid missed areas in the coating.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not apply to exterior areas in very high humidity or when rain is expected.\u003c\/li\u003e\n  \u003cli\u003eProtect freshly applied material from rain until fully cured.\u003c\/li\u003e\n  \u003cli\u003eHoles, cavities, cracks and other substrate defects must be filled with a suitable Sika mortar before application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, substrate type, whether it is an underground structure, foundation, slab or retaining wall, and whether there are cracks or groundwater moisture. This determines the preparation, number of coats and consumption.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"15 l.","offer_id":49291298242884,"sku":"429121","price":35.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaIgasolBC-Bitum-kauchukovopokritiesvisokaadhezia.png?v=1726849673"},{"product_id":"sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum","title":"Sika® Igolflex®-101 DE - polymer-bitumen waterproofing for foundations","description":"\u003cp\u003e\u003cstrong\u003eSika® Igolflex®-101 DE\u003c\/strong\u003e is a 1-component, ready-to-use \u003cstrong\u003epolymer-bitumen waterproofing\u003c\/strong\u003e product for thick-layer application. It is used as a waterproofing membrane on concrete and masonry, most often for reinforced concrete slabs, underground parts of buildings, basement walls and porous mineral substrates.\u003c\/p\u003e\n\n\u003cp\u003eThe product is elastic, does not sag on vertical surfaces and has good crack-bridging ability. It is suitable where bituminous waterproofing is required for foundations and structures, but it is not the right choice for surfaces that will be directly exposed to vehicle or pedestrian traffic.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika® Igolflex®-101 DE?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor waterproofing foundations and basement walls\u003c\/strong\u003e - on concrete or masonry with a porous surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor reinforced concrete slabs and podiums\u003c\/strong\u003e - when the system requires a thick-layer bituminous membrane.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor vertical surfaces\u003c\/strong\u003e - when it is important that the coating does not sag during application.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor substrates with small cracks\u003c\/strong\u003e - when crack-bridging ability is required within the system application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSystem selection\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSystem element\u003c\/th\u003e\n      \u003cth\u003eProduct\u003c\/th\u003e\n      \u003cth\u003eWhen it is used\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimer\u003c\/td\u003e\n      \u003ctd\u003e\u003ca href=\"\/en\/products\/sika-igolflex-p-01-grund\"\u003eSika® Igolflex® P-01 DE\u003c\/a\u003e\u003c\/td\u003e\n      \u003ctd\u003eFor improving adhesion on concrete, mortar, masonry or wood before bituminous coatings.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMain waterproofing\u003c\/td\u003e\n      \u003ctd\u003eSika® Igolflex®-101 DE\u003c\/td\u003e\n      \u003ctd\u003eAs a thick-layer polymer-bitumen membrane for slabs, podiums and basement walls.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDetail reinforcement\u003c\/td\u003e\n      \u003ctd\u003e\u003ca href=\"\/en\/products\/sika%C2%AE-igolflex%C2%AE-f-05-poliesterna-takan-za-armirane-na-pokritia\"\u003eSika® Igolflex® F-05\u003c\/a\u003e\u003c\/td\u003e\n      \u003ctd\u003eFor details, corners, junctions and areas where the system requires reinforcement.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use in contact with drinking water.\u003c\/li\u003e\n  \u003cli\u003eDo not use as a direct finish for vehicle or pedestrian traffic.\u003c\/li\u003e\n  \u003cli\u003eFor exposed UV-exposed surfaces, check whether a protective system or another product is required.\u003c\/li\u003e\n  \u003cli\u003eThe substrate must be sound, clean and prepared according to the Sika technical data sheet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eBefore application, the substrate must be cleaned of dust, oils, loose material and weak existing coatings. On highly absorbent or uneven substrates, the system primer is especially important. For details around corners, junctions and penetrations, assess whether reinforcing fabric is required.\u003c\/p\u003e\n\n\u003ch2\u003ePackaging and ordering\u003c\/h2\u003e\n\u003cp\u003eSika® Igolflex®-101 DE is available in a \u003cstrong\u003e28 L\u003c\/strong\u003e pack. For the correct product selection, send photos, the area in square metres, a description of the substrate and whether the area is a foundation, basement wall, slab or detail. If you are looking for a broader system selection, see \u003ca href=\"\/en\/collections\/hidroizolatsia-za-osnovi-i-saorazhenia\"\u003ewaterproofing for foundations and structures\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/techni-hidroizolatsionni-membrani\"\u003eliquid waterproofing membranes\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eSika waterproofing products\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-igolflex101\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated systems for Sika® Igolflex®-101 DE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eKey point:\u003c\/strong\u003e Igolflex-101 is the final thick-layer bituminous coating, but the system result depends on substrate preparation, the correct primer and reinforcement of critical details. This is especially important for foundations, basement walls, slabs and concrete-to-masonry junctions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor priming before the bituminous system, use \u003ca href=\"\/en\/products\/sika-igolflex-p-01-grund\"\u003eSika® Igolflex® P-01 DE\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor reinforcing cracks, edges and critical details, see \u003ca href=\"\/en\/products\/sika%C2%AE-igolflex%C2%AE-f-05-poliesterna-takan-za-armirane-na-pokritia\"\u003eSika® Igolflex® F-05\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eTo choose by application, see \u003ca href=\"\/en\/collections\/hidroizolatsia-za-osnovi-i-saorazhenia\"\u003ewaterproofing for foundations and structures\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"32 l.","offer_id":49291336417604,"sku":"797496","price":116.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaIgolflex-101-Debelosloynopokritienabazapolimer-modifitsiranbitum.webp?v=1726849926"},{"product_id":"sika®-igolflex®-f-05-poliesterna-takan-za-armirane-na-pokritia","title":"Sika® Igolflex® F-05 - Polyester Reinforcement Fabric for Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSika® Igolflex® F-05\u003c\/strong\u003e is a non-woven polyester fabric for reinforcing Sika® Igolflex® and Sikalastic® bituminous waterproofing coatings. It is used to strengthen the coating over cracked concrete, cementitious substrates, edges, junctions, drains and corners.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika® Igolflex® F-05?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika® Igolflex® F-05 when the waterproofing coating must be reinforced in critical areas: cracks, junctions, internal and external corners, drains and transitions. It is a system reinforcement embedded into a freshly applied coating, not a stand-alone waterproofing layer.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh tensile strength.\u003c\/li\u003e\n  \u003cli\u003eReinforces the waterproofing coating.\u003c\/li\u003e\n  \u003cli\u003eImproves the dimensional stability of the coating.\u003c\/li\u003e\n  \u003cli\u003eResistant to bitumen and alkalis.\u003c\/li\u003e\n  \u003cli\u003eEasy to embed into a freshly applied coating.\u003c\/li\u003e\n  \u003cli\u003eSuitable for Sika® Igolflex® and Sikalastic® systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eNon-woven polyester reinforcement fabric\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRolls according to TDS\u003c\/td\u003e\n      \u003ctd\u003e1.00 × 50 m and 0.14 × 50 m\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMass per unit area\u003c\/td\u003e\n      \u003ctd\u003eApprox. 110 g\/m²\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStorage\u003c\/td\u003e\n      \u003ctd\u003e36 months when stored correctly\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible systems\u003c\/td\u003e\n      \u003ctd\u003eSika® Igolflex® and Sikalastic® waterproofing coatings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOverlap\u003c\/td\u003e\n      \u003ctd\u003eMinimum 100 mm between sheets\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHow it is embedded\u003c\/h2\u003e\n\u003cp\u003eSika® Igolflex® F-05 is fully embedded into the first layer of Sika® Igolflex® or Sikalastic®. The sheets are overlapped by at least 100 mm, after which a second layer of the relevant coating is applied after the waiting time stated in the coating TDS.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe fabric is not a stand-alone waterproofing layer.\u003c\/li\u003e\n  \u003cli\u003eAlways check the TDS of the specific Sika® Igolflex® or Sikalastic® coating into which it will be embedded.\u003c\/li\u003e\n  \u003cli\u003eFor temporary flowing water under low pressure, the entire system must be checked, not only the reinforcement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify which Sika® Igolflex® or Sikalastic® system you will use, the area, details and zones requiring reinforcement. This allows the required quantity of fabric and the overlaps to be calculated.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-igolflexf05\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated systems for Sika® Igolflex® F-05\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e F-05 is not a stand-alone waterproofing layer. It is a reinforcing layer embedded into a freshly applied compatible coating to strengthen critical areas such as cracks, corners, edges, drains and transitions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor a bituminous system for foundations, combine with \u003ca href=\"\/en\/products\/sika-igolflex-101-debelosloyno-pokritie-na-baza-polimer-modifitsiran-bitum\"\u003eSika® Igolflex®-101 DE\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a UV-resistant liquid bituminous membrane, compare with \u003ca href=\"\/en\/products\/sikalastic-685-elastomerna-uv-ustoychiva-techna-bitumna-membrana-na-vodna-osnova\"\u003eSikalastic®-685\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor roofing solutions, see \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"1x50m - 50 m²","offer_id":49296146956612,"sku":"605166","price":137.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sika_Igolflex_F-05-Poliesternatakanzaarmiranenapokritia.jpg?v=1726895169"},{"product_id":"sikalastic-fleece-120-poliesterna-takan-za-armirane-na-techni-hidroizolatsionni-membrani","title":"Sikalastic® Fleece-120 - reinforcement fleece for liquid waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikalastic® Fleece-120\u003c\/strong\u003e is a polyester reinforcement fleece for \u003cstrong\u003eliquid Sikalastic waterproofing membranes\u003c\/strong\u003e. It is not a standalone waterproofing product, but a system component embedded into the freshly applied membrane to support the correct base coat thickness, crack-bridging and the mechanical resistance of the system.\u003c\/p\u003e\n\n\u003cp\u003eIt is used in new construction and roof refurbishment, especially at details, complex geometry, areas with restricted access, junctions, corners and areas where the liquid waterproofing must be reinforced. It is most commonly combined with Sikalastic roof systems and liquid waterproofing membranes.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you use Sikalastic® Fleece-120?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn roofs with many details\u003c\/strong\u003e - around upstands, penetrations, corners, drainage areas and junctions between different substrates.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor complex geometry\u003c\/strong\u003e - where a standard sheet membrane is difficult to install or access is restricted.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor reinforcing a liquid membrane\u003c\/strong\u003e - when the system requires polyester reinforcement for improved crack-bridging.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor repair works\u003c\/strong\u003e - where an area at risk of movement, cracking or mechanical stress needs to be strengthened.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow does it work in the system?\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eStep\u003c\/th\u003e\n      \u003cth\u003eWhat is done\u003c\/th\u003e\n      \u003cth\u003eWhy it matters\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e1. Preparation\u003c\/td\u003e\n      \u003ctd\u003eThe substrate is cleaned and, if required by the system, primed with a suitable primer.\u003c\/td\u003e\n      \u003ctd\u003eThe reinforcement does not compensate for a weak, dusty or unprepared substrate.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e2. First coat\u003c\/td\u003e\n      \u003ctd\u003eThe first coat of the liquid Sikalastic membrane is applied.\u003c\/td\u003e\n      \u003ctd\u003eFleece-120 must be embedded while the material is still wet.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e3. Embedding\u003c\/td\u003e\n      \u003ctd\u003eThe fleece is laid without wrinkles or air bubbles, with sufficient overlap between strips.\u003c\/td\u003e\n      \u003ctd\u003eCorrect embedding is essential for the strength and continuity of the system.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e4. Second coat\u003c\/td\u003e\n      \u003ctd\u003eAfter drying to a suitable condition, the next coat of the membrane is applied.\u003c\/td\u003e\n      \u003ctd\u003eThis keeps the reinforcement as part of a completed waterproofing system.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatible systems and related products\u003c\/h2\u003e\n\u003cp\u003eSikalastic® Fleece-120 is selected together with a suitable liquid membrane, not separately from the system. See \u003ca href=\"\/en\/products\/sikalastic-612-ednokomponentna-poliuretanova-hidroizolatsionna-membrana\"\u003eSikalastic®-612\u003c\/a\u003e, \u003ca href=\"\/en\/products\/sikalastic-685-elastomerna-uv-ustoychiva-techna-bitumna-membrana-na-vodna-osnova\"\u003eSikalastic®-685\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/techni-hidroizolatsionni-membrani\"\u003eliquid waterproofing membranes\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hidroizolatsia-na-pokrivi\"\u003eroof waterproofing\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use Fleece-120 as a standalone waterproofing product.\u003c\/li\u003e\n  \u003cli\u003eDo not apply over an unprepared, dusty, wet or unstable substrate.\u003c\/li\u003e\n  \u003cli\u003eFollow the product data sheet of the specific Sikalastic membrane for consumption, waiting time and compatible primer.\u003c\/li\u003e\n  \u003cli\u003eFor details, start by treating the details before the large horizontal areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackaging\u003c\/h2\u003e\n\u003cp\u003eThe product is supplied as a roll \u003cstrong\u003e1 x 50 m - 50 m²\u003c\/strong\u003e. For the correct selection, send dimensions, photos of the details and information on which Sikalastic membrane will be used. This makes it possible to assess whether full reinforcement is required or only reinforcement of details and risk areas.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"1x50m - 50 m²","offer_id":49296171467076,"sku":"97480","price":137.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikalastic_Fleece-120-Poliesternatakanzaarmiranenatechnihidroizolatsionnimembrani.webp?v=1726895518"},{"product_id":"sikatop-seal-107-elastik-elastichna-tsimentova-hidroizolatsia","title":"SikaTop® Seal-107 Elastik - Elastic Cementitious Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikaTop® Seal-107 Elastik\u003c\/strong\u003e is a 2-component elastic cement-polymer waterproofing mortar for concrete, cement renders and masonry. It is suitable for bathrooms, shower cabins, balconies, terraces, swimming pools, foundation walls, basements and other areas where a durable mineral waterproofing layer is required before installing tiles or rigid protection.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose SikaTop Seal-107 Elastik?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaTop® Seal-107 Elastik when you need an elastic cementitious waterproofing system that can be used both indoors and outdoors. Unlike ready-to-use liquid membranes intended only for interior wet rooms, this product is also suitable for concrete surfaces, foundation walls, balconies, terraces and swimming pools before bonding ceramic tiles.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2-component polymer-modified cementitious mortar.\u003c\/li\u003e\n  \u003cli\u003eElastic waterproofing for horizontal and vertical surfaces.\u003c\/li\u003e\n  \u003cli\u003eSuitable for bathrooms, shower cabins, balconies, terraces, swimming pools and foundation walls.\u003c\/li\u003e\n  \u003cli\u003eNo water is added during mixing.\u003c\/li\u003e\n  \u003cli\u003eCan be applied by brush, fine trowelling or machine application.\u003c\/li\u003e\n  \u003cli\u003eProtects concrete against water penetration and carbonation.\u003c\/li\u003e\n  \u003cli\u003eApproved for contact with drinking water according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eElastic 2-component cement-polymer waterproofing mortar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e30 kg set: component A 10 kg + component B 20 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing as slurry\u003c\/td\u003e\n      \u003ctd\u003eA : B = 1 : 2 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing as trowel-applied mortar\u003c\/td\u003e\n      \u003ctd\u003eA : B = 1 : 2.5 by weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApproximate consumption\u003c\/td\u003e\n      \u003ctd\u003e~1.7 kg\/m²\/mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer thickness\u003c\/td\u003e\n      \u003ctd\u003e0.75 mm minimum; 1.50 mm maximum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTotal thickness for waterproofing\u003c\/td\u003e\n      \u003ctd\u003e1.5 to 2.0 mm in a minimum of 2 layers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +8 °C to +30 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time between layers\u003c\/td\u003e\n      \u003ctd\u003e~12 h at +10 °C; ~6 h at +20 °C; ~3 h at +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, clean and free from dust, loose particles, oils, grease, cement laitance and other contaminants. The tensile adhesion strength of the concrete must be greater than 1 N\/mm². The surface is pre-wetted to saturation before application, and the product is mechanically mixed with an electric mixer to obtain a homogeneous, lump-free mix.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not add water under any circumstances.\u003c\/li\u003e\n  \u003cli\u003eDo not exceed the maximum layer thickness.\u003c\/li\u003e\n  \u003cli\u003eFor waterproofing, always apply a minimum of 2 layers.\u003c\/li\u003e\n  \u003cli\u003eFreshly applied material must be protected from frost and rain.\u003c\/li\u003e\n  \u003cli\u003eNot a final decorative coating.\u003c\/li\u003e\n  \u003cli\u003eNot resistant to pedestrian traffic and must be covered with a watertight screed or tiles where it will be walked on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, substrate type, whether the application is a bathroom, terrace, foundation or swimming pool, and whether tiles\/screed will be installed over the waterproofing. This allows the actual consumption to be calculated and confirms whether SikaTop® Seal-107 Elastik is the correct system for the detail.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Set (AB)","offer_id":54129927192900,"sku":"753749","price":70.77,"currency_code":"EUR","in_stock":true},{"title":"Module (A)","offer_id":54129927225668,"sku":"753748","price":53.64,"currency_code":"EUR","in_stock":true},{"title":"Module (B)","offer_id":54129927258436,"sku":"105137","price":17.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/elastichna-hidroizolatsia-dvukomponentna-sikalastic-107-elastik.webp?v=1737613492"},{"product_id":"sikatop-seal-107-цименто-полимерна-хидроизолация","title":"SikaTop® Seal-107 - Cement-Polymer Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikaTop® Seal-107\u003c\/strong\u003e is a 2-component cement-polymer waterproofing mortar for concrete, cementitious renders and masonry. It is used as a rigid waterproofing and damp-proofing coating where the substrate is sound, properly prepared and there is no movement in the cracks.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose SikaTop Seal-107?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaTop® Seal-107 when you need a \u003cstrong\u003ecementitious waterproofing\u003c\/strong\u003e solution for interior or exterior moisture protection on concrete, renders and masonry. The product is suitable for basement walls, foundations and filling pores and blowholes, but the TDS specifies that waterproofing of foundations and basements is for cases not subject to hydrostatic pressure.\u003c\/p\u003e\n\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2-component, pre-dosed system: liquid polymer and dry cementitious mix.\u003c\/li\u003e\n  \u003cli\u003eEasy application by brush, trowel or spray.\u003c\/li\u003e\n  \u003cli\u003eVery good adhesion to a properly prepared substrate.\u003c\/li\u003e\n  \u003cli\u003eProtects concrete against carbonation and water ingress.\u003c\/li\u003e\n  \u003cli\u003eNon-corrosive to steel and iron.\u003c\/li\u003e\n  \u003cli\u003eCan be painted after proper curing in accordance with the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e2-component polymer-modified cementitious waterproofing mortar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e25 kg set: 20 kg bag + 5 kg canister\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2.0 kg\/m²\/mm, excluding losses and substrate irregularities\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLayer thickness\u003c\/td\u003e\n      \u003ctd\u003e0.75-1.5 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended system\u003c\/td\u003e\n      \u003ctd\u003eAt least 2 coats to a total thickness of 1.5-2.0 mm; for high water pressure - 3 coats\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +8 °C to +35 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePot life\u003c\/td\u003e\n      \u003ctd\u003eApprox. 30 minutes at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time between coats\u003c\/td\u003e\n      \u003ctd\u003eApprox. 12 h at +10 °C, 6 h at +20 °C, 3 h at +30 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSubsequent coatings\u003c\/td\u003e\n      \u003ctd\u003eAfter approx. 7 days of curing\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhere it is suitable\u003c\/h2\u003e\n\u003cp\u003eSikaTop® Seal-107 can be used for interior and exterior waterproofing on concrete, cementitious renders and masonry, for basement walls, filling pores and blowholes, fine cracks without movement and as a levelling layer on concrete. For details under tiles, corners and penetrations, it is important to use a suitable system tape such as \u003ca href=\"\/en\/products\/sika-sealtape-s-elastichna-hidroizoaltsionna-uplatnitelna-lenta-za-oformyane-na-detayli-pod-plochki-v-mokri-pomeshtenia\"\u003eSika® SealTape S\u003c\/a\u003e or \u003ca href=\"\/en\/products\/sika-sealtape-f-uplatnitelna-lenta-za-premostvane-na-puknatini\"\u003eSika® SealTape F\u003c\/a\u003e, depending on the exposure.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe substrate must be sound and clean, free from cement laitance, oils, grease stains and friable particles.\u003c\/li\u003e\n  \u003cli\u003eThe substrate strength must be above 1.0 N\/mm².\u003c\/li\u003e\n  \u003cli\u003ePre-wet the substrate with water to saturation.\u003c\/li\u003e\n  \u003cli\u003eDo not exceed the maximum layer thickness.\u003c\/li\u003e\n  \u003cli\u003eFreshly applied material must be protected from frost, rain and direct adverse exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, substrate type, photos, and information on any active leaks, cracks, water pressure or details around corners and pipes. This determines the number of coats, the required tapes and whether SikaTop® Seal-107 is the correct system for the specific project.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"Set (AB)","offer_id":54129951834436,"sku":"714469","price":36.29,"currency_code":"EUR","in_stock":true},{"title":"Module (A)","offer_id":54129951867204,"sku":"714468","price":21.77,"currency_code":"EUR","in_stock":true},{"title":"Module (B)","offer_id":54129951899972,"sku":"105129","price":14.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaTopSeal-107-2-komponentnaTsimento-polimernahidroizolatsia.webp?v=1737614930"},{"product_id":"sikalastic-260-stop-aqua-techna-1-komponentna-hidroizolatsia-za-mokri-pomeshtenia","title":"Sikalastic®-260 Stop Aqua - Liquid Bathroom Waterproofing","description":"\u003cp\u003e\u003cstrong\u003eSikalastic®-260 Stop Aqua\u003c\/strong\u003e is a ready-to-use, 1-component liquid waterproofing membrane for bathrooms, shower cabins and indoor wet rooms. The product forms a fully bonded, seamless membrane that is ready for subsequent tile installation.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikalastic-260 Stop Aqua?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikalastic®-260 Stop Aqua when you need fast waterproofing for a bathroom under tiles and the application is indoors. The membrane is water-based, applied by roller or trowel, and is part of a system with Sika® SealTape tapes, primers and tile adhesives.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component liquid waterproofing, ready to use.\u003c\/li\u003e\n  \u003cli\u003eSuitable for bathrooms and shower cabins.\u003c\/li\u003e\n  \u003cli\u003eSeamless membrane under tiles.\u003c\/li\u003e\n  \u003cli\u003eWater-based product.\u003c\/li\u003e\n  \u003cli\u003eFast drying and short waiting time between coats.\u003c\/li\u003e\n  \u003cli\u003eGood crack-bridging ability.\u003c\/li\u003e\n  \u003cli\u003eETA 22\/0411 and VOC classification GEV Emicode EC1plus according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eLiquid-applied waterproofing membrane based on an aqueous dispersion of synthetic resin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication\u003c\/td\u003e\n      \u003ctd\u003eIndoor use only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSuitable substrates\u003c\/td\u003e\n      \u003ctd\u003eConcrete, cementitious substrates, dry screeds, gypsum boards, gypsum blocks, gypsum plaster and ceramic tiles\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDensity\u003c\/td\u003e\n      \u003ctd\u003e1.4 kg\/L\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003e1.2 kg\/m², applied in two coats\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum thickness\u003c\/td\u003e\n      \u003ctd\u003e0.4 mm wet film per coat; minimum 0.5 mm total dry film\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWatertightness\u003c\/td\u003e\n      \u003ctd\u003eWithstands 150 kPa for 7 days\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWaiting time at +20 °C and 50% RH\u003c\/td\u003e\n      \u003ctd\u003e60 min between the first and second coat; 90 min from the second coat to tile installation\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSystem details: joints, drains and pipes\u003c\/h2\u003e\n\u003cp\u003eFor movement joints, floor-to-wall joints, floor drains and pipes, the TDS specifies the use of suitable Sika® SealTape F tapes and collars. This is critical in bathroom and shower areas because most leaks do not occur through the flat area, but at corners, penetrations and drains.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, dry and free from dust, oils, grease, surface treatment compounds and friable particles. The product is supplied ready to use and does not require mixing. Apply evenly with a short-pile roller or trowel, in two coats, after the relevant waiting time.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area of the bathroom or shower zone, substrate type, number of drains, pipe penetrations and internal\/external corners. This allows calculation not only of Sikalastic®-260 Stop Aqua, but also of the required tapes, collars, primer and tile adhesive.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"7 kg.","offer_id":54129992663364,"sku":"705802","price":36.72,"currency_code":"EUR","in_stock":true},{"title":"22 kg.","offer_id":54129992696132,"sku":"705312","price":97.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikalastic-260_Stop_Aqua_-_Techna_1-komponentna_hidroizolatsia_za_mokri_pomeshtenia.webp?v=1737616102"},{"product_id":"sika-mono-plug-barzosvarzvasht-tsimentov-raztvor-za-spirane-na-techove","title":"Sika® Mono Plug - Fast Leak-Stopping Mortar","description":"\u003cp\u003e\u003cstrong\u003eSika® Mono Plug\u003c\/strong\u003e is a fast-setting cementitious sealing mortar for stopping water ingress and active leaks. The product is used locally where a leak needs to be blocked quickly before a subsequent waterproofing or repair system is applied.\u003c\/p\u003e\u003ch2\u003eWhen to choose Sika Mono Plug?\u003c\/h2\u003e\u003cp\u003eChoose Sika® Mono Plug for serious water leaks in foundation structures, basements and cellars, lift shafts, underground garages, storage rooms, tanks, cisterns, drainage systems and tunnels. This is a product for rapid leak sealing, not a complete waterproofing system for the entire surface.\u003c\/p\u003e\u003ch2\u003eMain advantages\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSets very quickly and stops water ingress.\u003c\/li\u003e\u003cli\u003eCan be used dry or as a mortar after adding water.\u003c\/li\u003e\u003cli\u003eReady-to-use cement-based powder composition.\u003c\/li\u003e\u003cli\u003eChloride-free and does not cause corrosion of steel.\u003c\/li\u003e\u003cli\u003eSuitable for local leaks in concrete and underground structures.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eProduct type\u003c\/td\u003e\u003ctd\u003eFast-setting cement-based sealing mortar\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003ePackaging\u003c\/td\u003e\u003ctd\u003e5 kg pail\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eAppearance\u003c\/td\u003e\u003ctd\u003eGrey powder\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eApplication temperature\u003c\/td\u003e\u003ctd\u003eFrom +5 °C to +30 °C for air and substrate\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eUse after opening\u003c\/td\u003e\u003ctd\u003eUse within one week after opening the package\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eApplication on leaks\u003c\/h2\u003e\u003cp\u003eFor wet application, the product is mixed with water and applied to the leaking area. For dry application, the dry compound is pressed directly onto the leaking area until the material hardens. If the water is under pressure, the TDS recommends first draining it using a hose.\u003c\/p\u003e\u003ch2\u003eImportant limitations\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eMix only small quantities with water, because the product sets very quickly.\u003c\/li\u003e\u003cli\u003eDo not use material that has hardened before application.\u003c\/li\u003e\u003cli\u003eWear protective gloves and safety glasses during application.\u003c\/li\u003e\u003cli\u003eAfter the leak has been stopped, a separate waterproofing or repair system is often required for a durable solution.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eBefore ordering\u003c\/h2\u003e\u003cp\u003eSend a photo or video of the leak, the type of structure and whether the water is under pressure. This helps assess whether Sika® Mono Plug is sufficient as a first step and what subsequent waterproofing is required.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":54129996071236,"sku":"533495","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sika_Mono_Plug_-_Barzosvarzvasht_tsimentov_raztvor_za_spirane_na_techove.webp?v=1737616970"},{"product_id":"sika-monotop-120-seal-ednokomponentna-tsimentova-hidroizolatsia-za-beton-i-zidaria","title":"Sika MonoTop®-120 Seal - cementitious waterproofing for concrete","description":"\u003cp\u003e\u003cstrong\u003eSika MonoTop®-120 Seal\u003c\/strong\u003e is a 1-component cementitious waterproofing mortar for concrete and masonry. It contains penetrating crystallizing additives that help seal the concrete and limit water penetration.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sika MonoTop 120 Seal?\u003c\/h2\u003e\n\u003cp\u003eChoose Sika MonoTop®-120 Seal when you need a \u003cstrong\u003e1-component cementitious waterproofing\u003c\/strong\u003e product to which only water is added. The product is suitable for horizontal and vertical concrete surfaces and can be used to protect concrete structures against water ingress under positive and negative pressure: water tanks, swimming pools, bathrooms, underground structures and facilities.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component product - only water is added.\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to concrete, cement mortars, stone and other substrates.\u003c\/li\u003e\n  \u003cli\u003eReduces capillary and water absorption.\u003c\/li\u003e\n  \u003cli\u003eWater-vapour permeable and frost resistant.\u003c\/li\u003e\n  \u003cli\u003eSuitable for manual and machine application.\u003c\/li\u003e\n  \u003cli\u003eComplies with BDS EN 1504-2, Principle 2, Method 2.2 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e1-component cementitious waterproofing mortar\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e25 kg bag\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2 kg\/m² dry material per coat; 2 coats are required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThickness\u003c\/td\u003e\n      \u003ctd\u003e2-5 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing water\u003c\/td\u003e\n      \u003ctd\u003eApprox. 5.1-5.6 l per 25 kg of dry material\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +30 °C for air and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWorkability\u003c\/td\u003e\n      \u003ctd\u003eApprox. 60 minutes at +20 °C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNumber of coats\u003c\/td\u003e\n      \u003ctd\u003eUsually 2; where the risk is higher, a third coat is recommended\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and application\u003c\/h2\u003e\n\u003cp\u003eThe concrete must be sound, clean, free from cement laitance, grease, oils and friable particles, with pull-off strength above 1.0 N\/mm². The substrate is mechanically cleaned to an open porous texture and thoroughly pre-wetted. The first coat is applied with a notched trowel, and subsequent coats are applied crosswise to the previous coat after it has hardened sufficiently.\u003c\/p\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not exceed the recommended water quantity.\u003c\/li\u003e\n  \u003cli\u003eDo not add extra water during finishing, as this may cause discoloration and cracking.\u003c\/li\u003e\n  \u003cli\u003eProtect from rain for at least 4-6 hours at +20 °C and from freezing after application.\u003c\/li\u003e\n  \u003cli\u003eOn horizontal surfaces subject to traffic, the product must be mechanically protected, for example with a concrete layer or ceramic tiles.\u003c\/li\u003e\n  \u003cli\u003eBefore applying a protective layer, wait at least 3 days at +20 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, substrate type, whether there is positive or negative water pressure, cracks, active leaks and whether the waterproofing will be exposed to traffic or tiled. This determines consumption, number of coats and the need for additional repair products.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":54130010489156,"sku":"589907","price":27.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaMonoTop_-120Seal-Ednokomponentnatsimentovahidroizolatsiazabetonizidaria.webp?v=1737617298"},{"product_id":"sikalastic-6100-fx-uv-elastichna-tsimentova-hidroizolatsia-15kg","title":"Sikalastic®-6100 FX - UV-Resistant Elastic Cementitious Waterproofing 15 kg","description":"\u003cp\u003e\u003cstrong\u003eSikalastic®-6100 FX\u003c\/strong\u003e is a 1-component, elastic, flexible, lightweight cementitious membrane for \u003cstrong\u003ewaterproofing and concrete protection\u003c\/strong\u003e. The product is mixed only with water, applied manually or by spray, and forms a seamless membrane resistant to positive and negative water pressure.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikalastic 6100 FX?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikalastic®-6100 FX when you need a strong waterproofing solution for more than one type of project: bathroom, shower enclosure, balcony, terrace, small roof area, foundation, concrete wall, swimming pool under tiles, tank, or an area subject to constant water exposure. This is not a standard rigid cementitious skim coat, but an elastic membrane with crack-bridging properties, UV resistance, and protection of concrete against carbonation and chloride attack.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the product is so strong\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV-resistant\u003c\/strong\u003e - can be used as a final exposed coating in exterior applications without deterioration of mechanical performance according to the TDS.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWaterproof at 2 mm\u003c\/strong\u003e - withstands up to 5 bar positive water pressure and up to 2.5 bar negative pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElastic down to -10 °C\u003c\/strong\u003e - retains elasticity under water and at low temperatures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBridges cracks\u003c\/strong\u003e - class A4 at +23 °C, A3 at -10 °C, and dynamic crack bridging B3.1.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast return to service\u003c\/strong\u003e - second coat after 2-5 hours; water pressure and mechanical loading after approximately 3 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBreathable coating\u003c\/strong\u003e - permeable to water vapour, but with very low capillary water absorption.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcrete protection\u003c\/strong\u003e - high resistance to CO₂ diffusion, sulfate resistance, and protection against chloride attack.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuitable for potable water\u003c\/strong\u003e - the TDS states compliance with Directive (EU) 2020\/2184 and WRAS approval.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow consumption\u003c\/strong\u003e - lightweight formula; one 15 kg bag covers approximately 8.3 m² at 2 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it can be used\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInterior and exterior waterproofing on concrete, cementitious substrates, and masonry.\u003c\/li\u003e\n  \u003cli\u003eBathrooms, shower enclosures, and wet rooms.\u003c\/li\u003e\n  \u003cli\u003eBalconies, terraces, and small roof areas, including where UV resistance is critical.\u003c\/li\u003e\n  \u003cli\u003eWaterproofing under tiles in combination with suitable adhesives and tapes.\u003c\/li\u003e\n  \u003cli\u003eSwimming pools under tiles, tanks, pipes, and water-retaining structures.\u003c\/li\u003e\n  \u003cli\u003eFoundations, concrete walls, bases, and structures.\u003c\/li\u003e\n  \u003cli\u003eProtection of concrete against carbonation, chlorides, sulfates, and atmospheric exposure.\u003c\/li\u003e\n  \u003cli\u003eBridge decks and projects with subsequent asphalt layers, where permitted by the project specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e1-component elastic cementitious membrane\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e15 kg bag\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eLight grey and white according to the TDS; this product is the 15 kg variant\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing water\u003c\/td\u003e\n      \u003ctd\u003e5.6-6.2 l water per 15 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003e~0.9 kg\/m²\/mm powder product; ~1.2 kg\/m²\/mm mixed product\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum thickness for waterproofing\u003c\/td\u003e\n      \u003ctd\u003e2 mm total thickness\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoverage\u003c\/td\u003e\n      \u003ctd\u003e~8.3 m² from 15 kg at 2 mm, depending on substrate roughness\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSecond application\u003c\/td\u003e\n      \u003ctd\u003eAfter 2-5 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTile installation\u003c\/td\u003e\n      \u003ctd\u003eAfter 4-8 hours under suitable conditions\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWater pressure \/ mechanical loading\u003c\/td\u003e\n      \u003ctd\u003eAfter approximately 3 days\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C for the product, air, and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUV resistance\u003c\/td\u003e\n      \u003ctd\u003eAfter 2000 h in a UV chamber, no changes in appearance were observed according to the TDS\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eUV protection and exterior application\u003c\/h2\u003e\n\u003cp\u003eThe most important advantage for exterior projects is UV resistance. Sikalastic®-6100 FX can function as a visible final coating in exterior applications when the substrate is correctly prepared and site conditions comply with the TDS. This makes it a very strong choice for details, balconies, terraces, small roof areas, and concrete surfaces where water, sun, and temperature changes act on the system at the same time.\u003c\/p\u003e\n\n\u003ch2\u003eSikalastic 6100 FX or another Sika product?\u003c\/h2\u003e\n\u003cp\u003eIf you need an \u003cstrong\u003eelastic cementitious waterproofing with UV resistance and a wide application range\u003c\/strong\u003e, Sikalastic®-6100 FX is the stronger all-round choice. If you need a classic 2-component waterproofing under tiles, compare it with \u003ca href=\"\/en\/products\/sikatop-seal-107-elastik-elastichna-tsimentova-hidroizolatsia\"\u003eSikaTop® Seal-107 Elastik\u003c\/a\u003e. For a polyurethane liquid membrane for roofs, see \u003ca href=\"\/en\/products\/sikalastic-612-ednokomponentna-poliuretanova-hidroizolatsionna-membrana\"\u003eSikalastic®-612\u003c\/a\u003e, and for a UV-resistant water-based bituminous membrane, see \u003ca href=\"\/en\/products\/sikalastic-685-elastomerna-uv-ustoychiva-techna-bitumna-membrana-na-vodna-osnova\"\u003eSikalastic®-685\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, clean, and free from oil, grease, dust, loose particles, defective old coatings, and materials that reduce adhesion. Sikalastic®-6100 FX is applied to a pre-dampened substrate, but without standing water. Do not apply to frozen surfaces, and do not work if the temperature may fall below +5 °C within the next 24 hours. Avoid application in direct sunlight.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, substrate type, whether it is indoors or outdoors, whether tiles will be installed, and whether there is constant water exposure, cracks, joints, drains, upstands, or contact with potable water. This allows the correct thickness and consumption to be confirmed, and whether Sikalastic®-6100 FX is the best system for your project.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"Default Title","offer_id":56793493143876,"sku":null,"price":98.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/glo-227012-sikalastic-6100-fx-grey-15kg-de-en-fr-it-nl-pl-1x1-01869257_3A1-1.jpg?v=1779821117"},{"product_id":"nafuflex-basic-1-bitumna-hidroizolatsiya-30-l","title":"Nafuflex Basic 1 – бързосъхнеща битумна хидроизолация \/ 30 l","description":"\u003cp\u003e\u003cstrong\u003eNafuflex Basic 1\u003c\/strong\u003e е еднокомпонентно, много бързосъхнещо полимерно-модифицирано битумно дебело покритие (PMBC) за хидроизолация на строителни конструкции.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eХидроизолация на вертикални, хоризонтални и наклонени повърхности под защитни слоеве съгласно DIN 18533.\u003c\/li\u003e\n\u003cli\u003eВодни класове на въздействие W1-E, W2.1-E, W3-E и W4-E.\u003c\/li\u003e\n\u003cli\u003eЛепило за защитни, изолационни и дренажни плоскости.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eМного бързо съхнене и висока еластичност.\u003c\/li\u003e\n\u003cli\u003eПремоства пукнатини и има консистенция за полагане с маламашка.\u003c\/li\u003e\n\u003cli\u003eБез разтворители; съответства на DIN 18533 и DIN EN 15814.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e3353091 039 1001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e30 l кофа\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003eТемпература на въздуха и основата ≥ +5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eРазход\u003c\/th\u003e\n\u003ctd\u003e3,6 l\/m² за 3,0 mm сух слой; 4,8 l\/m² за 4,0 mm сух слой\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eВреме за съхнене\u003c\/th\u003e\n\u003ctd\u003eПриблизително 1–2 дни при 20 °C и 65 % относителна влажност\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152001376580,"sku":"3353091 039 1001","price":97.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Nafuflex-basic-1280x1080.webp?v=1791724406"},{"product_id":"nafuflex-easy-tech-1-praskaema-bitumna-hidroizolatsiya-30-l","title":"Nafuflex Easy Tech 1 – пръскаема битумна хидроизолация \/ 30 l","description":"\u003cp\u003e\u003cstrong\u003eNafuflex Easy Tech 1\u003c\/strong\u003e е бързосъхнещо, еднокомпонентно и пръскаемо полимерно-модифицирано битумно дебело покритие (PMBC) за хидроизолация на сгради.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eХидроизолация на вертикални, хоризонтални и наклонени повърхности под защитни слоеве съгласно DIN 18533.\u003c\/li\u003e\n\u003cli\u003eВодни класове на въздействие W1-E, W2.1-E, W3-E и W4-E.\u003c\/li\u003e\n\u003cli\u003eЛепило за защитни, изолационни и дренажни плоскости.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eЕднокомпонентно PMBC покритие, гъвкаво и премостващо пукнатини.\u003c\/li\u003e\n\u003cli\u003eПодходящо за машинно полагане със спирални помпи.\u003c\/li\u003e\n\u003cli\u003eБез разтворители; съответства на DIN 18533 и DIN EN 15814.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e3354091 039 1001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e30 l кофа\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003eТемпература на въздуха и основата ≥ +5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eРазход\u003c\/th\u003e\n\u003ctd\u003e3,9 l\/m² за 3,0 mm сух слой; 5,2 l\/m² за 4,0 mm сух слой\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eВреме за съхнене\u003c\/th\u003e\n\u003ctd\u003eПриблизително 1–2 дни при 20 °C и 65 % относителна влажност\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152001769796,"sku":"3354091 039 1001","price":92.52,"currency_code":"EUR","in_stock":true}]},{"product_id":"mc-proof-df-10-dispersna-hidroizolatsiya-2-5-kg","title":"MC-Proof DF 10 – супереластична дисперсна хидроизолация \/ 2,5 кг","description":"\u003cp\u003e\u003cstrong\u003eMC-Proof DF 10\u003c\/strong\u003e е еднокомпонентна, бързосвързваща и супереластична дисперсна хидроизолация за строителни конструкции в ново строителство и при ремонт.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eХидроизолация на сутеренни стени, фундаментни плочи, основи, балкони и тераси.\u003c\/li\u003e\n\u003cli\u003eХидроизолация под плочки и под замазки.\u003c\/li\u003e\n\u003cli\u003eРемонт на съществуващи хидроизолации и частични ремонти на покривни хидроизолации.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eГотова за употреба без грундиране.\u003c\/li\u003e\n\u003cli\u003eВисокоеластична и премостваща пукнатини.\u003c\/li\u003e\n\u003cli\u003eБез битум и разтворители; устойчива на UV, замръзване и стареене.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e3410100 016 0101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e2,5 кг\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОснова\u003c\/th\u003e\n\u003ctd\u003eПолимерна дисперсия с добавки\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦвят\u003c\/th\u003e\n\u003ctd\u003eЗелен\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за обработка\u003c\/th\u003e\n\u003ctd\u003e+5 °C до +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152001835332,"sku":"3410100 016 0101","price":25.5,"currency_code":"EUR","in_stock":true}]},{"product_id":"mc-proof-df-10-dispersna-hidroizolatsiya-10-kg","title":"MC-Proof DF 10 – супереластична дисперсна хидроизолация \/ 10 кг","description":"\u003cp\u003e\u003cstrong\u003eMC-Proof DF 10\u003c\/strong\u003e е еднокомпонентна, бързосвързваща и супереластична дисперсна хидроизолация за строителни конструкции в ново строителство и при ремонт.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eХидроизолация на сутеренни стени, фундаментни плочи, основи, балкони и тераси.\u003c\/li\u003e\n\u003cli\u003eХидроизолация под плочки и под замазки.\u003c\/li\u003e\n\u003cli\u003eРемонт на съществуващи хидроизолации и частични ремонти на покривни хидроизолации.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eГотова за употреба без грундиране.\u003c\/li\u003e\n\u003cli\u003eВисокоеластична и премостваща пукнатини.\u003c\/li\u003e\n\u003cli\u003eБез битум и разтворители; устойчива на UV, замръзване и стареене.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e3410100 024 0101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e10 кг\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОснова\u003c\/th\u003e\n\u003ctd\u003eПолимерна дисперсия с добавки\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦвят\u003c\/th\u003e\n\u003ctd\u003eЗелен\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за обработка\u003c\/th\u003e\n\u003ctd\u003e+5 °C до +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152001999172,"sku":"3410100 024 0101","price":90.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/mc-proof-df-10-10kg-square.png?v=1791822102"},{"product_id":"ombran-w-raztvor-spirane-lokalni-vodni-techove-15-kg","title":"ombran W – бърз разтвор за спиране на локални водни течове \/ 15 кг","description":"\u003cp\u003e\u003cstrong\u003eombran W\u003c\/strong\u003e е бързовтвърдяващ се, набъбващ циментов разтвор за бързо и трайно спиране на локални водни течове.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eСпиране на течове и проникване на вода в бетон, зидария и естествен камък.\u003c\/li\u003e\n\u003cli\u003eУплътняване на тръбни пробиви, връзки, вътрешни ъгли и преходи.\u003c\/li\u003e\n\u003cli\u003eВъзстановяване на уплътняването при тръбни и шахтови съединения.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eЕднокомпонентен циментов разтвор.\u003c\/li\u003e\n\u003cli\u003eРазширява се при контакт с вода по време на втвърдяване.\u003c\/li\u003e\n\u003cli\u003eНе съдържа корозивни вещества и е обемно стабилен съгласно DIN 1164.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e4576070 031 1040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e15 кг кофа\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eСъотношение на смесване\u003c\/th\u003e\n\u003ctd\u003e1 : 0,2 суха смес : вода по тегло\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eВреме за обработка\u003c\/th\u003e\n\u003ctd\u003eПриблизително 60 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за обработка\u003c\/th\u003e\n\u003ctd\u003e+5 °C до +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦвят\u003c\/th\u003e\n\u003ctd\u003eСив\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152002261316,"sku":"4576070 031 1040","price":66.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Ombran_W.jpg?v=1791724629"},{"product_id":"ombran-iw-raztvor-hidroizolirane-ploshtni-infiltratsii-10-kg","title":"ombran IW – бърз разтвор за хидроизолиране на площни инфилтрации \/ 10 кг","description":"\u003cp\u003e\u003cstrong\u003eombran IW\u003c\/strong\u003e е бързосвързващ еднокомпонентен циментов разтвор за хидроизолиране на площни течове и водни инфилтрации.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eБързо хидроизолиране на повърхностни течове и проникване на вода.\u003c\/li\u003e\n\u003cli\u003eПриложение върху бетон и зидария.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eНа циментова основа и еднокомпонентен.\u003c\/li\u003e\n\u003cli\u003eРазширява се при контакт с вода по време на втвърдяване.\u003c\/li\u003e\n\u003cli\u003eМного добра адхезия към минерални основи и без корозивни вещества.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e4579070 024 1040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e10 кг кофа\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003e+5 °C до +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eРазход\u003c\/th\u003e\n\u003ctd\u003eВ зависимост от основата и приложението\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦвят\u003c\/th\u003e\n\u003ctd\u003eСив\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152003637572,"sku":"4579070 024 1040","price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Ombran_IW.jpg?v=1791724647"},{"product_id":"mc-injekt-powerseal-r-vodospirashta-ekspandirashta-smola-10-l","title":"MC-Injekt PowerSeal R – водоспираща експандираща инжекционна смола \/ 10 l","description":"\u003cp\u003e\u003cstrong\u003eMC-Injekt PowerSeal R\u003c\/strong\u003e е еднокомпонентна, водоспираща и еластично уплътняваща експандираща смола за строителни основи, бетон и зидария.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eЕластично уплътняване на пукнатини, фуги и кухини във влажни бетонни и зидани конструкции.\u003c\/li\u003e\n\u003cli\u003eСпиране на течаща и налягаща вода.\u003c\/li\u003e\n\u003cli\u003eЗапълване на инжекционни маркучи и площно инжектиране на кухини.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eЕднокомпонентна, бързо реагираща с вода инжекционна смола.\u003c\/li\u003e\n\u003cli\u003eСилно увеличава обема си при контакт с вода.\u003c\/li\u003e\n\u003cli\u003eОсигурява незабавно и трайно еластично водоплътно уплътняване.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e5538000 024 1001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e10 l туба\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003eПриблизително +5 °C до +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОтворено време\u003c\/th\u003e\n\u003ctd\u003e145–200 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦвят\u003c\/th\u003e\n\u003ctd\u003eЖълто-прозрачен\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152003834180,"sku":"5538000 024 1001","price":158.52,"currency_code":"EUR","in_stock":true}]},{"product_id":"mc-injekt-2300-flow-elastichna-injektsionna-smola-20-l","title":"MC-Injekt 2300 flow – еластична инжекционна смола \/ комплект 20 l","description":"\u003cp\u003e\u003cstrong\u003eMC-Injekt 2300 flow\u003c\/strong\u003e е дуктилно-еластична, трайно уплътняваща и реагираща с влагата полиуретанова инжекционна смола за бетон, зидария и строителни основи.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eЕластично запълване и уплътняване на пукнатини, строителни фуги и кухини при сухи и водонаситени условия.\u003c\/li\u003e\n\u003cli\u003eЗапълване на инжекционни маркучи и хидроизолиране на хидротехнически съоръжения.\u003c\/li\u003e\n\u003cli\u003eУплътняване на тръбни връзки, шахти и съоръжения за отпадъчни води.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eНисковискозна полиуретанова еластомерна смола с много добра инжектируемост.\u003c\/li\u003e\n\u003cli\u003eДълго време за обработка и ускорена реакция при контакт с вода.\u003c\/li\u003e\n\u003cli\u003eТрайно еластично и водоплътно уплътняване.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e5508001 024 0101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003eКомплект 20 l: компонент A 10 l + компонент B 10 l\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eСъотношение на смесване\u003c\/th\u003e\n\u003ctd\u003e1 : 1 по обем\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eВреме за обработка\u003c\/th\u003e\n\u003ctd\u003eПриблизително 140 min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003e+5 °C до +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦвят\u003c\/th\u003e\n\u003ctd\u003eСветлокафяв\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152004063556,"sku":"5508001 024 0101","price":368.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Gebindefoto_MC-Injekt_2300_flow_png.webp?v=1791724652"},{"product_id":"centrament-proof-cp-10-kristalizirashta-dobavka-beton-18-kg","title":"Centrament Proof CP 10 – кристализираща добавка за водонепропусклив бетон \/ 18 кг","description":"\u003cp\u003e\u003cstrong\u003eCentrament Proof CP 10\u003c\/strong\u003e е прахообразна кристализираща добавка с пластифициращ ефект за бетон с повишени изисквания към водонепропускливостта.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eВодонепропусклив бетон за подземни конструкции.\u003c\/li\u003e\n\u003cli\u003eТръби, шахти, канали и други елементи на канализационна инфраструктура.\u003c\/li\u003e\n\u003cli\u003eБетонни резервоари, басейни и конструкции, изложени на вода под налягане.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eЗапълва пори и прекъсва капиляри чрез кристализация.\u003c\/li\u003e\n\u003cli\u003eЕфективна срещу вода под налягане и подпомага заздравяването на микропукнатини до 0,4 mm.\u003c\/li\u003e\n\u003cli\u003eНамалява скоростта на карбонизация и сулфатизация.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e1580100 034 1001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e18 кг торба\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eПрепоръчителна дозировка\u003c\/th\u003e\n\u003ctd\u003e5–15 g на kg цимент\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eПрепоръчително водоциментно отношение\u003c\/th\u003e\n\u003ctd\u003ew\/c ≤ 0,45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦвят\u003c\/th\u003e\n\u003ctd\u003eСив\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eФорма\u003c\/th\u003e\n\u003ctd\u003eПрахообразна\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152007373124,"sku":"1580100 034 1001","price":36.94,"currency_code":"EUR","in_stock":true}]},{"product_id":"ombran-asp-tsimentova-hidroizolatsiya-25-kg","title":"ombran ASP – cementitious waterproofing slurry, 25 kg","description":"\u003cp\u003eombran ASP is a one-component, sulphate-resistant cementitious waterproofing slurry for concrete and masonry. Its vapour-permeable mineral coating protects against ground moisture, capillary moisture and seepage water. Supplied in a 25 kg bag.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eMineral waterproofing of foundations, manholes and tanks.\u003c\/li\u003e\n\u003cli\u003eConcrete and masonry surfaces in contact with the ground.\u003c\/li\u003e\n\u003cli\u003eManual or spray application on properly prepared substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical details\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\u003ctd\u003e47140700371040000\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth scope=\"row\"\u003eMixing water\u003c\/th\u003e\u003ctd\u003e5.5–6.8 l per 25 kg\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth scope=\"row\"\u003eDry material consumption\u003c\/th\u003e\u003ctd\u003eApprox. 1.6 kg\/m² per mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth scope=\"row\"\u003eThickness per coat\u003c\/th\u003e\u003ctd\u003e1–2 mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth scope=\"row\"\u003eTotal thickness\u003c\/th\u003e\u003ctd\u003eMaximum 4 mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth scope=\"row\"\u003eWorking time\u003c\/th\u003e\u003ctd\u003eApprox. 60 min\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth scope=\"row\"\u003eAir and substrate temperature\u003c\/th\u003e\u003ctd\u003e+10 to +30 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth scope=\"row\"\u003eMaterial temperature\u003c\/th\u003e\u003ctd\u003e+10 to +25 °C\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eApplication and important conditions\u003c\/h2\u003e\n\u003cp\u003eRemove unsound material and contaminants. Prepare a rough, sound substrate and pre-wet to a matt-damp condition without standing water.\u003c\/p\u003e\n\u003cp\u003eMix a complete bag with the specified water for at least 3 minutes. Do not add other materials or mix partial packs.\u003c\/p\u003e\n\u003cp\u003eApply at least two coats. Ground moisture requires more than 2 mm total thickness; pressurised seepage requires more than 3 mm in at least three coats. Allow approximately 6–24 hours between coats.\u003c\/p\u003e\n\u003cp\u003eProtect the fresh coating from rapid drying. Heavily water-saturated areas may require preliminary treatment with ombran IW.\u003c\/p\u003e\n\u003ch2\u003eRelated categories\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/collections\/hidroizolatsia-za-osnovi-i-saorazhenia\"\u003eFoundation and infrastructure waterproofing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/mc-bauchemie-tds-ombran_asp_de_bg_bg_tds-208fa8b6.pdf?v=1791819240\" target=\"_blank\" rel=\"noopener\"\u003eTechnical data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57454313898308,"sku":"47140700371040000","price":25.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/ombran-asp-tsimentova-hidroizolatsiya-25-kg-d1c7c0fb.webp?v=1791820400"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/collections\/hidroizolatsia-na-osnovi-i-saorazhenia.webp?v=1737917901","url":"https:\/\/stroitelna-himia.bg\/en\/collections\/hidroizolatsia-za-osnovi-i-saorazhenia.oembed?page=2","provider":"Строителна Химия","version":"1.0","type":"link"}