{"title":"Concrete Protective Coatings","description":"\u003cp\u003eSelect concrete protective coatings and impregnations by substrate, exposure and purpose. Transparent impregnation, film-forming coatings and pigmented finishes have different roles. Some materials are intended for facades and other surfaces without pedestrian or vehicle traffic.\u003c\/p\u003e\u003ch2\u003eSelecting suitable materials\u003c\/h2\u003e\u003cp\u003eCheck concrete condition, existing coatings, moisture and cracks. Establish any repair work first. Verify carbonation protection, vapour permeability and crack-bridging performance for the exact product.\u003c\/p\u003e\u003ch2\u003eProducts from available brands\u003c\/h2\u003e\u003cp\u003eThe products below have different roles. Check the description, package contents and technical sheet for the exact material:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/sikacor-950-f-cheren-zashtitno-pokritie-za-beton-i-stomana-15-kg\"\u003eSikaCor 950 F Black - Protective Coating for Concrete and Steel \/ 15 kg\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/mc-color-proof-pro-prozrachno-zashtitno-pokritie-beton-15-l\"\u003eMC-Color Proof pro\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eQuantity and technical enquiry\u003c\/h2\u003e\u003cp\u003eSend the area, photographs, substrate and service conditions. Quantities depend on consumption of each coat and package sizes. An individual product price does not automatically cover a finished system. \u003ca href=\"\/en\/pages\/contact\"\u003eSend a technical enquiry\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"sikagard-680-s-ednokomponentno-zashtitno-pokritie-za-beton","title":"Sikagard®-680 S Betoncolor - Protective Coating for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-680 S Betoncolor\u003c\/strong\u003e is a 1-component \u003cstrong\u003eprotective coating for concrete\u003c\/strong\u003e based on solvent-borne methacrylate resin. It is used on concrete and other cementitious mineral substrates where protection against weathering, carbonation and contamination is required, without significantly changing the characteristic texture of the concrete.\u003c\/p\u003e\n\n\u003cp\u003eThe product is available as a clear version and in RAL colours. It is suitable for facade and civil engineering concrete surfaces where a protective and decorative finish is required, with resistance to ageing, weathering and alkalinity.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikagard®-680 S Betoncolor?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor protecting concrete facades and elements\u003c\/strong\u003e - where the concrete is exposed to weathering and contamination.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor reducing carbonation\u003c\/strong\u003e - where the system must limit the penetration of carbon dioxide into the concrete.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor mineral cementitious substrates\u003c\/strong\u003e - concrete, repair mortars and other stable cementitious surfaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor a protective and decorative finish\u003c\/strong\u003e - where a clear or RAL colour version is required according to the project.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eProperty\u003c\/th\u003e\n      \u003cth\u003ePractical benefit\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeather resistance\u003c\/td\u003e\n      \u003ctd\u003eSuitable for external concrete and cementitious surfaces exposed to rain and contamination.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHigh diffusion resistance to CO₂\u003c\/td\u003e\n      \u003ctd\u003eHelps reduce the rate and depth of concrete carbonation.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaintains water vapour permeability\u003c\/td\u003e\n      \u003ctd\u003eThe protection should not block the normal vapour permeability of a suitably prepared substrate.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduced dirt retention\u003c\/td\u003e\n      \u003ctd\u003eThe surface becomes dirty less easily and discolours less from rain and weathering.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eClear or RAL colour?\u003c\/h2\u003e\n\u003cp\u003eThe clear version is suitable when the aim is to preserve the visible structure of the concrete. The RAL colour versions are more suitable when, in addition to protection, a uniform decorative finish is required. The variants available in the store include 20 kg clear and 30 kg in RAL1015, RAL7032, RAL7030, RAL7035, RAL9001, RAL9002 and a clear version.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eThe substrate must be sound, dry, clean and free from dust, oils, friable material or weak old coatings.\u003c\/li\u003e\n  \u003cli\u003eFor repair mortars and new concrete, check the minimum age and moisture content according to the technical data sheet.\u003c\/li\u003e\n  \u003cli\u003eDo not choose the product by colour alone; check whether the main objective is protection against carbonation, weathering or a decorative finish.\u003c\/li\u003e\n  \u003cli\u003eFor heavily trafficked floors, permanent water exposure or chemical exposure, another Sika system should be checked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRelated categories\u003c\/h2\u003e\n\u003cp\u003eFor system selection, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/reparatsionni-sanirashti-raztvori\"\u003erepair mortars for concrete\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hidroizolatsia\"\u003eSika waterproofing\u003c\/a\u003e. If you send photos, the area, substrate type and whether a clear or RAL finish is required, a more accurate system and primer\/preparation method can be selected.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard680s\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikagard®-680 S Betoncolor\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-680 S Betoncolor is a protective and decorative coating for concrete. The final result depends on the cleanliness and soundness of the substrate, the required primer, the choice between a clear and RAL finish, and whether the objective is protection against carbonation, weathering or visual refreshment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the category, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a water-based primer, compare with \u003ca href=\"\/en\/products\/sikagard-552-w-aquaprimer-grund-na-vodna-osnova\"\u003eSikagard®-552 W Aquaprimer\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a coating with high crack-bridging ability, see \u003ca href=\"\/en\/products\/sikagard-5500-zashtitno-pokritie-za-beton-s-visoka-sposobnost-za-premostvane-na-puknatini\"\u003eSikagard®-5500\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"20kg. \/ Colorless","offer_id":49288895398212,"sku":"5769","price":228.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-680_S_ednokomponentno_zashtitno_pokritie_za_beton.webp?v=1720433959"},{"product_id":"sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi","title":"Sikagard®-700 S - Water-Repellent Impregnation for Concrete and Facades","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-700 S\u003c\/strong\u003e is a colourless silane\/siloxane water-repellent impregnation for absorbent cementitious substrates, concrete, cement renders, concrete slabs, masonry and natural stone. The product penetrates into open pores, reduces capillary water absorption and allows water vapour diffusion without acting as a vapour barrier.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikagard 700 S?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-700 S when you need a water-repellent impregnation for concrete or mineral facade substrates that must retain their natural appearance. It is suitable for surfaces exposed to weathering and can also be used as a hydrophobic impregnation beneath compatible protective coatings.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces capillary water absorption.\u003c\/li\u003e\n  \u003cli\u003eLimits efflorescence and the penetration of dirt into the pores.\u003c\/li\u003e\n  \u003cli\u003eReduces the ingress and diffusion of chloride ions.\u003c\/li\u003e\n  \u003cli\u003eUsually does not change the appearance of the substrate.\u003c\/li\u003e\n  \u003cli\u003eAllows water vapour diffusion and does not act as a vapour barrier.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated with suitable solvent-based or emulsion-based coatings.\u003c\/li\u003e\n  \u003cli\u003eMeets the requirements for a hydrophobic impregnation according to BDS EN 1504-2, Class I according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eSilane\/siloxane blend in organic solvent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eColourless liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~0.800 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003e1-2 coats of Sikagard®-700 S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~0.300-0.500 kg\/m² per coat on normally absorbent substrates\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSubstrate moisture\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;5-6% when measured with Tramex\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time before compatible coatings\u003c\/td\u003e\n\u003ctd\u003eAt least 5 hours after the hydrophobic impregnation\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 3 hours after application at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eSikagard®-700 S is not a waterproofing solution for hydrostatic pressure, permanent contact with water or waterproofing of underground structures. Visible cracks allowing moisture ingress must be treated separately. On natural stone and where high aesthetic requirements apply, prepare a trial area, as slight darkening may occur on some substrates.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the substrate type, approximate area, whether there are cracks or efflorescence, and whether a subsequent coating will be applied over the impregnation. This helps assess the required consumption and whether Sikagard®-700 S is the right choice compared with a water-based impregnation such as Sikagard®-703 W.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5l.","offer_id":49284386652484,"sku":"151824","price":97.42,"currency_code":"EUR","in_stock":true},{"title":"20l.","offer_id":49284386685252,"sku":"151821","price":270.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-700S-Vodootblaskvashtimpregnatorzatsimentovipovarhnosti_fasadi.webp?v=1726741140"},{"product_id":"sikagard-703-w-vodootblaskvasht-impregnator-za-fasadi-1","title":"Sikagard®-703 W - Water-Repellent Facade Impregnator","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-703 W\u003c\/strong\u003e is a ready-to-use, water-based water-repellent impregnation for facades and porous mineral substrates. It is used on mortar, brick, stone, asbestos cement and other absorbent facade materials where protection against water penetration is required without a visible change in appearance.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikagard 703 W?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-703 W for facades, masonry and stone surfaces where water-repellent protection with water vapour permeability is required. It is a practical choice for facade maintenance because reduced water absorption limits soiling and the conditions for the development of fungi, mould and lichens.\u003c\/p\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eStrong water-repellent performance for facade substrates.\u003c\/li\u003e\n  \u003cli\u003eWater vapour permeable - allows the substrate to \"breathe\".\u003c\/li\u003e\n  \u003cli\u003eInvisible treatment that does not change the appearance of the substrate.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance to soiling by reducing water absorption.\u003c\/li\u003e\n  \u003cli\u003eLimits the conditions for the development of fungi, mould and lichens.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated with suitable paints and coatings.\u003c\/li\u003e\n  \u003cli\u003eReady-to-use, water-based product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eCombination of silane\/siloxane\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhitish liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.0 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on mortar\u003c\/td\u003e\n\u003ctd\u003e~150-200 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on other porous materials\u003c\/td\u003e\n\u003ctd\u003e~300-500 g\/m² depending on porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time before compatible coatings\u003c\/td\u003e\n\u003ctd\u003eAt least 5 hours after applying the hydrophobic impregnation\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 3 hours after application at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be clean, sound and free from dust, grease stains, efflorescence and old coatings. Cracks wider than 300 μm must be repaired before application. For all substrates, it is good practice to carry out a trial area, especially where the final appearance is critical.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the facade material, area, approximate porosity and whether there are cracks or old coatings. This helps estimate the actual consumption and whether Sikagard®-703 W is more suitable than a deeper-penetrating solvent-based impregnation such as Sikagard®-700 S.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"2l.","offer_id":49284402741572,"sku":"406943","price":19.55,"currency_code":"EUR","in_stock":true},{"title":"20l.","offer_id":49284402774340,"sku":"437349","price":112.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-703W-Vodootblaskvashtimpregnatorzafasadi.webp?v=1726741937"},{"product_id":"sikagard-905-w-impregnator-i-povarhnosten-vtvarditel-za-obrabotka-sreshtu-izsolvane-i-izbivane-na-vlaga","title":"Sikagard®-905 W - Impregnator and Surface Hardener Against Efflorescence","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-905 W\u003c\/strong\u003e is a ready-to-use, water-based impregnator and surface hardener for treatment against efflorescence, damp patches and dusting on weak mineral substrates. Once dry, it is transparent and creates a physical barrier that reduces moisture and the conditions for mold growth.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikagard 905 W be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-905 W for plaster, skim coats, brick or stone where there are traces of efflorescence, local dampness or surface dusting. The product penetrates deeply due to its low viscosity and can prepare weak, dusting substrates before painting.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVery low viscosity for deep penetration into the substrate.\u003c\/li\u003e\n  \u003cli\u003eAlmost invisible after drying.\u003c\/li\u003e\n  \u003cli\u003eSuitable for treatment against efflorescence and damp patches.\u003c\/li\u003e\n  \u003cli\u003eCan be used as a surface hardener for weak and dusty substrates.\u003c\/li\u003e\n  \u003cli\u003eCan be covered with paints or wallpaper after full drying.\u003c\/li\u003e\n  \u003cli\u003eSuitable for interior and exterior use.\u003c\/li\u003e\n  \u003cli\u003eUV resistant and without biocidal\/algicidal raw materials according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eWater-based impregnating and damp-proofing resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eMilky white liquid, transparent after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.01 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003eTypically ~0.2-0.3 l\/m² per coat, depending on porosity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +5 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eBy brush or roller, rubbing in until the substrate is saturated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSecond coat\u003c\/td\u003e\n\u003ctd\u003eOn highly absorbent substrates, after the first coat has dried\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVOC content\u003c\/td\u003e\n\u003ctd\u003e~0.0 g\/l according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant limitations\u003c\/h2\u003e\n\u003cp\u003eSikagard®-905 W does not solve moisture caused by condensation on cold walls and is not a substitute for full restoration where plaster is severely damaged. Visible traces of efflorescence, mold and biological growth must be removed before application. If the material is to remain without a subsequent coating, make a test area, as under some conditions it may slightly change the appearance of the substrate.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eDescribe whether the problem is efflorescence, dusting, moisture from the substrate or condensation, and what coating will be applied afterwards. This is important because Sikagard®-905 W is the correct choice for surface impregnation and strengthening, but it does not replace structural waterproofing.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"2l.","offer_id":49284405985604,"sku":"95594","price":17.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-905W_-Impregnatoripovarhnostenvtvarditelzaobrabotkasreshtuizsolvaneiizbivanenavlaga.webp?v=1726742540"},{"product_id":"sikagard-907-w-impregnator-za-poryozni-nastilki-i-stabilizator-na-pyasachni-fugi","title":"Sikagard®-907 W - Impregnator for Porous Paving and Sand Joints","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-907 W\u003c\/strong\u003e is a 1-component, UV-resistant, water-based impregnator for protecting porous paving and stabilizing sand joints. The product protects surfaces against water, oils and other aggressive liquids, and in joints it penetrates the sand, stabilizes it and reduces erosion.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikagard 907 W be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-907 W for paved surfaces, terraces, car parks, ramps, yards, pedestrian areas, commercial areas and porous concrete or stone paving. It is suitable when both surface impregnation and stabilization of sand joints are required.\u003c\/p\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1-component product, ready to use, without dilution.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant and weather-resistant.\u003c\/li\u003e\n  \u003cli\u003eProtects against water, oils and fuels.\u003c\/li\u003e\n  \u003cli\u003eReduces staining from hydrocarbon-based materials.\u003c\/li\u003e\n  \u003cli\u003eResistant to de-icing salts.\u003c\/li\u003e\n  \u003cli\u003eImproves resistance to freeze\/thaw cycles.\u003c\/li\u003e\n  \u003cli\u003eStabilizes sand joints, reduces erosion and limits weed growth.\u003c\/li\u003e\n  \u003cli\u003eMakes cleaning easier and may intensify the colour of the substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylic dispersion-based resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eMilky white liquid, colourless\/transparent after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.01 kg\/L at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003epH\u003c\/td\u003e\n\u003ctd\u003e~9\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on paved surfaces with sand joints\u003c\/td\u003e\n\u003ctd\u003e~0.5–1.5 L\/m² for the first coat; ~0.100–0.200 L\/m² for the second coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption on other surfaces without joints\u003c\/td\u003e\n\u003ctd\u003e~0.200–0.300 L\/m² for the first coat; ~0.100–0.150 L\/m² for the second coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +5 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRain protection\u003c\/td\u003e\n\u003ctd\u003eAt least 6 hours at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePedestrian traffic\u003c\/td\u003e\n\u003ctd\u003eApproximately after ~4–5 hours at around +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLight traffic \/ full loading\u003c\/td\u003e\n\u003ctd\u003e~24 hours \/ ~72 hours at around +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be thoroughly cleaned and dry. For sand joints, check that the sand is sufficiently dry and compacted, without excessive compaction that would reduce penetration. The product is not suitable where there is high chemical exposure.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the type of paving, the area, the width and depth of the joints, whether there will be vehicle traffic and what type of contamination is expected. This makes it possible to assess consumption and whether one or two coats are required.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard907w\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated solutions for Sikagard®-907 W\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-907 W is a practical choice when you need an impregnator for pavers, porous paving and sand joints. For concrete floors, façades or heavily loaded industrial areas, another sealer or protective system may be required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor concrete impregnators and sealers, see \u003ca href=\"\/en\/collections\/%D0%B8%D0%BC%D0%BF%D1%80%D0%B5%D0%B3%D0%BD%D0%B8%D1%80%D0%B0%D0%BD%D0%B5-%D0%B8-%D0%B7%D0%B0%D0%BF%D0%B5%D1%87%D0%B0%D1%82%D0%B2%D0%B0%D0%BD%D0%B5-%D0%BD%D0%B0-%D0%B1%D0%B5%D1%82%D0%BE%D0%BD\"\u003econcrete impregnation and sealing\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor water-repellent façade protection, compare with \u003ca href=\"\/en\/products\/sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi\"\u003eSikagard®-700 S\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor an acrylic sealer for concrete floors, see \u003ca href=\"\/en\/products\/sikafloor-proseal-12-akrilaten-sastav-za-impregnirane-i-zapechatka-na-betonni-povarhnosti\"\u003eSikafloor® ProSeal-12\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"5l.","offer_id":49284433150276,"sku":"158935","price":51.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-907W_-Impregnatorzaporyozninastilkiistabilizatornapyasachnifugi.webp?v=1726742860"},{"product_id":"sikagard-720-epocem-epoksi-tsimentov-raztvor-za-zapechatka-na-pori","title":"Sikagard®-720 EpoCem® - Epoxy-Cement Pore Sealing Mortar","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-720 EpoCem®\u003c\/strong\u003e is a 3-component epoxy-cement fine mortar for pore sealing, levelling and finishing concrete, mortar and stone surfaces. It is used as a 0.5-3 mm layer, including on damp or recently placed concrete substrates, where preparation is required before subsequent resin coatings.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose Sikagard 720 EpoCem?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-720 EpoCem® for concrete surfaces with pores, unevenness or high moisture, where a smooth, strong and technically controlled substrate must be created. The product is suitable for new construction and repair of concrete with a damaged surface, including in chemically aggressive environments.\u003c\/p\u003e\n\n\u003ch2\u003eMain Applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLevelling layer on concrete or mortar at a thickness of 0.5-3 mm.\u003c\/li\u003e\n  \u003cli\u003ePore sealing, smoothing and levelling of concrete surfaces.\u003c\/li\u003e\n  \u003cli\u003ePreparation for smooth finishing coatings.\u003c\/li\u003e\n  \u003cli\u003eTemporary moisture barrier with a minimum thickness of 2 mm under epoxy, polyurethane or PMMA resin coatings requiring a dry substrate.\u003c\/li\u003e\n  \u003cli\u003eApplication on substrates with high moisture and on recently placed concrete, without standing water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter chemical resistance compared with polymer-cement mortars and screeds.\u003c\/li\u003e\n  \u003cli\u003eExcellent protection of concrete in aggressive environments.\u003c\/li\u003e\n  \u003cli\u003eImpermeable to liquids, yet vapour-permeable.\u003c\/li\u003e\n  \u003cli\u003eExcellent adhesion to damp or dry, recently placed or hardened concrete.\u003c\/li\u003e\n  \u003cli\u003eCan be overcoated quickly with Sika® resin-based finishing products.\u003c\/li\u003e\n  \u003cli\u003eFor interior and exterior use.\u003c\/li\u003e\n  \u003cli\u003eSolvent-free and can be applied manually or mechanically.\u003c\/li\u003e\n  \u003cli\u003eCE marking according to EN 1504 Parts 2 and 3 as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eEpoxy-modified cementitious mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003ePre-batched 21 kg set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003eComponent A : B : C = 1 : 2.5 : 14-15 by mass\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity of mix A+B+C\u003c\/td\u003e\n\u003ctd\u003e~2.00 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompressive strength\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;45 N\/mm² after 28 days at +20 °C and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eService temperature after curing\u003c\/td\u003e\n\u003ctd\u003eFrom -30 °C to +80 °C under continuous exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~2.0 kg\/m²\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLayer thickness\u003c\/td\u003e\n\u003ctd\u003e0.5-3 mm; up to 5 mm on small areas\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +8 °C to +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~80 min at +10 °C, ~40 min at +20 °C, ~20 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eImportant Application Conditions\u003c\/h2\u003e\n\u003cp\u003eThe concrete substrate must be sound, with a minimum compressive strength of 25 N\/mm² and a minimum tensile strength of 1.5 N\/mm². The substrate may be damp, but must be free from puddles and contaminants such as oils, grease, old coatings or impregnations. When applying gas-tight coatings over Sikagard®-720 EpoCem®, check the substrate moisture and do not work on assumptions.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003ePlease send the area, the condition of the concrete, the measured moisture, the desired layer thickness and the coating that will be applied afterwards. This is important because Sikagard®-720 EpoCem® is often an intermediate technical layer and must be coordinated with the complete system.\u003c\/p\u003e\n\u003cdiv data-seo-product=\"deep-product-seo-batch2-2026-05-08-sikagard720\" class=\"seo-product-system-links\"\u003e\n\u003ch2\u003eRelated Systems for Sikagard®-720 EpoCem®\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMost important:\u003c\/strong\u003e Sikagard-720 EpoCem is a technical intermediate layer for pore sealing, levelling and preparation of concrete, including damp substrates without standing water. The next coating must be selected according to the moisture level, exposure and finish requirements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor protective coatings and systems, see \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective coatings for concrete\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor epoxy flooring systems after suitable preparation, see \u003ca href=\"\/en\/products\/sikafloor-264-plus-epoksidno-podovo-pokritie-za-garazh-i-sklad\"\u003eSikafloor®-264 Plus\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor a primer in Sikafloor systems, compare with \u003ca href=\"\/en\/products\/sikafloor-150-epoksiden-grund-izravnitelen-raztvor-i-zamazka\"\u003eSikafloor®-150\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":49284447961412,"sku":"92315","price":98.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard_-720EpoCem_-Epoksi-tsimentovraztvorzazapechatkanapori.webp?v=1726743223"},{"product_id":"sikacor-950-f-pokritie-za-stomana-i-beton-za-tezhak-rezhim-na-eksploatatsia","title":"SikaCor®-950 F - Epoxy Coating for Steel and Concrete Under Heavy-Duty Conditions","description":"\u003cp\u003e\u003cstrong\u003eSikaCor®-950 F\u003c\/strong\u003e is a durable 2-component, low-solvent epoxy coating for steel and concrete under heavy-duty service conditions. It is used for underground and underwater structures, hydraulic engineering works, tanks and water-retaining structures, including environments with wastewater, agriculture and the chemical industry.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Choose SikaCor 950 F?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaCor®-950 F when a protective coating for concrete or steel is required with high resistance to water, abrasion, impact and chemicals. It is a professional product for sites with aggressive service environments, including locations where application onto damp concrete is unavoidable.\u003c\/p\u003e\n\n\u003ch2\u003eMain Advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2-component epoxy coating for steel and concrete.\u003c\/li\u003e\n  \u003cli\u003eHard after full curing.\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant and impact-resistant.\u003c\/li\u003e\n  \u003cli\u003eExcellent resistance to water and chemicals.\u003c\/li\u003e\n  \u003cli\u003eSuitable for underground and underwater structures.\u003c\/li\u003e\n  \u003cli\u003eCE marking as a coating for concrete protection in accordance with EN 1504-2, as stated in the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003e2-component coating based on epoxy resin and mineral fillers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, tinted red\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.9 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolids content\u003c\/td\u003e\n\u003ctd\u003e~75% by volume, ~88% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem on concrete\u003c\/td\u003e\n\u003ctd\u003e2-3 coats of SikaCor®-950 F; the first coat may be diluted with max. 5% Sika® Thinner S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSystem on steel\u003c\/td\u003e\n\u003ctd\u003e2-3 coats of SikaCor®-950 F; for high mechanical loads, SikaCor® Zinc R primer is recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio A:B\u003c\/td\u003e\n\u003ctd\u003e93:7 by weight; 100:14 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTheoretical consumption\u003c\/td\u003e\n\u003ctd\u003e~0.380 kg\/m² for 150 μm dry film thickness, without losses\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMinimum product and substrate temperature\u003c\/td\u003e\n\u003ctd\u003e+10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~1.5 hours at +20 °C; ~45 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChemical and Temperature Resistance\u003c\/h2\u003e\n\u003cp\u003eAccording to the TDS, the product is resistant to fresh, process, saline and seawater, domestic wastewater, faeces, diluted inorganic acids and salts, mineral oils and fuels, lubricating oils and detergents. It is not resistant to benzene hydrocarbons and tar oils. Dry heat resistance is up to approx. +100 °C, and hot water resistance is up to approx. +60 °C.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Limitations\u003c\/h2\u003e\n\u003cp\u003eSikaCor®-950 F is not suitable for surfaces in contact with drinking water. Direct exposure to water immediately after application should only be permitted in special cases and after consultation with environmental protection authorities, as solvents may temporarily contaminate the water.\u003c\/p\u003e\n\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify whether the substrate is concrete or steel, the service environment, contact with water\/wastewater, expected chemical exposure, desired system thickness and application conditions. With SikaCor®-950 F, the choice of system is more important than the individual product.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"35kg. \/ Black","offer_id":49284570644804,"sku":"640145","price":524.0,"currency_code":"EUR","in_stock":true},{"title":"35kg. \/ Red","offer_id":49284584767812,"sku":"639972","price":524.0,"currency_code":"EUR","in_stock":true},{"title":"Thinner S 5 kg. \/ N\/A","offer_id":54182716834116,"sku":"753259","price":54.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaCor_-950F_-Pokritiezastomanaibetonzatezhakrezhimnaeksploatatsia.webp?v=1726744221"},{"product_id":"sikafloor-proseal-12-akrilaten-sastav-za-impregnirane-i-zapechatka-na-betonni-povarhnosti","title":"Sikafloor® ProSeal-12 – Concrete Impregnator and Sealer","description":"\u003cp\u003e\u003cstrong\u003eSikafloor® ProSeal-12\u003c\/strong\u003e is an acrylate formulation for \u003cstrong\u003eimpregnating and sealing concrete\u003c\/strong\u003e. It is used on fresh or already hardened concrete when the aim is to make the surface more resistant to wear, reduce dusting, and lower absorption of oils and contaminants.\u003c\/p\u003e\n\n\u003cp\u003eThe product is suitable for concrete floors and structures in garages, warehouses, work areas, auto repair shops, car parks, and other areas where untreated concrete dusts, becomes dirty easily, or requires more economical protection without installing a full epoxy flooring system.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikafloor® ProSeal-12?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor fresh concrete\u003c\/strong\u003e - when sealing is required after surface finishing to support proper drying and reduce rapid water loss.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor old or hardened concrete\u003c\/strong\u003e - when the floor dusts, absorbs contaminants, and needs surface strengthening and easier maintenance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor garages, warehouses, and workshops\u003c\/strong\u003e - when a practical concrete sealer is required instead of a thicker resin system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor industrial and commercial areas\u003c\/strong\u003e - when the objective is improved wear resistance and lower surface absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat does it do, and what does it not do?\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eEffect\u003c\/th\u003e\n      \u003cth\u003eWhat it means in practice\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduces dusting\u003c\/td\u003e\n      \u003ctd\u003eSuitable for concrete surfaces that release dust during traffic, cleaning, or service.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eImproves wear resistance\u003c\/td\u003e\n      \u003ctd\u003eHelps create a stronger surface layer, but does not replace a full epoxy system under heavy-duty loads.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReduces absorption\u003c\/td\u003e\n      \u003ctd\u003eImproves resistance to oils and contaminants, but should not be regarded as a deep water-repellent facade impregnation treatment.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEconomical protection\u003c\/td\u003e\n      \u003ctd\u003eA good choice when the aim is to seal concrete, not to create a decorative or thick-layer floor finish.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eProSeal-12 or another concrete impregnator?\u003c\/h2\u003e\n\u003cp\u003eIf you need a \u003ca href=\"\/en\/collections\/%D0%B8%D0%BC%D0%BF%D1%80%D0%B5%D0%B3%D0%BD%D0%B8%D1%80%D0%B0%D0%BD%D0%B5-%D0%B8-%D0%B7%D0%B0%D0%BF%D0%B5%D1%87%D0%B0%D1%82%D0%B2%D0%B0%D0%BD%D0%B5-%D0%BD%D0%B0-%D0%B1%D0%B5%D1%82%D0%BE%D0%BD\"\u003econcrete impregnator\u003c\/a\u003e for floors that dust and absorb liquids, Sikafloor® ProSeal-12 is a logical choice. If the main objective is water repellency on cementitious surfaces or facades, see \u003ca href=\"\/en\/products\/sikagard-700-s-vodootblaskvasht-impregnator-za-tsimentovi-povarhnosti-fasadi\"\u003eSikagard®-700 S\u003c\/a\u003e. If the floor will be exposed to more serious loads, tyre traffic, or chemical exposure, consider \u003ca href=\"\/en\/collections\/epoksidni-podovi-sistemi\"\u003eepoxy flooring systems\u003c\/a\u003e or \u003ca href=\"\/en\/products\/sikafloor-2510-w-epoksidno-podovo-pokritie-na-vodna-osnova\"\u003eSikafloor®-2510 W\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eApplication and preparation\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOn fresh concrete, apply after the surface finishing work has been completed.\u003c\/li\u003e\n  \u003cli\u003eOn old concrete, all dust, loose material, oils, and contaminants must be removed before application.\u003c\/li\u003e\n  \u003cli\u003eIt may be applied with a low-pressure sprayer, brush, or roller, depending on site conditions and the product data sheet.\u003c\/li\u003e\n  \u003cli\u003eIf there is any doubt about compatibility, absorption, or appearance, first carry out a test area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackaging and selection\u003c\/h2\u003e\n\u003cp\u003eAvailable packaging: \u003cstrong\u003e5 l, 15 l, and 200 l\u003c\/strong\u003e. For accurate selection, send the area in square metres, photos of the concrete, information on whether it is fresh or old, and how the area will be used. This makes it possible to assess whether ProSeal-12 is sufficient, or whether it is better to choose a system for a \u003ca href=\"\/en\/collections\/pokritia-nastilki-avtomobilni-parkingi-i-garzhi\"\u003egarage or car park\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/podovi-pokritia-za-avtoservizi-i-rabotilnitsi\"\u003eauto repair shop\u003c\/a\u003e, or \u003ca href=\"\/en\/collections\/zashtitni-pokritia\"\u003eprotective concrete coating\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"5 l.","offer_id":49289849176388,"sku":"422871","price":59.0,"currency_code":"EUR","in_stock":true},{"title":"15 l.","offer_id":49289855795524,"sku":"405149","price":137.0,"currency_code":"EUR","in_stock":true},{"title":"200 l.","offer_id":49289855828292,"sku":"405151","price":1482.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikafloor_ProSeal-12-Akrilatensastavzaimpregniraneizapechatkanabetonnipovarhnosti.webp?v=1726830817"},{"product_id":"sikagard-63-n-ral-7032-2-komponentno-epoksidno-zashtitno-pokritie-za-beton-i-metal","title":"Sikagard®-63 N RAL 7032 - epoxy protective coating for concrete and metal","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-63 N RAL 7032\u003c\/strong\u003e is a 2-component, 100% solids epoxy protective coating for concrete, cementitious substrates, epoxy compounds and metal. It is used as a chemically resistant, liquid-impermeable protective layer in industrial, food-processing, wastewater treatment, agricultural, chemical and pharmaceutical facilities.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikagard 63 N?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-63 N when you need an epoxy coating for concrete or metal with good mechanical and chemical resistance, high coverage and protection against liquids. The product is for professional use and requires control of moisture, substrate preparation, dew point and working time.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eChemically resistant protective layer on concrete, stone, cement mortar and smoothing\/rendering compounds.\u003c\/li\u003e\n  \u003cli\u003eCoating over epoxy-cementitious compounds and epoxy-based products.\u003c\/li\u003e\n  \u003cli\u003eAnti-corrosion coating on metal.\u003c\/li\u003e\n  \u003cli\u003eProtection of linings in tanks and silos.\u003c\/li\u003e\n  \u003cli\u003eFood-processing facilities, wastewater treatment plants, agricultural, chemical, pharmaceutical and bottling plants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSolvent-free.\u003c\/li\u003e\n  \u003cli\u003e100% solids content.\u003c\/li\u003e\n  \u003cli\u003eGood mechanical and chemical resistance.\u003c\/li\u003e\n  \u003cli\u003eHigh coverage and easy mixing.\u003c\/li\u003e\n  \u003cli\u003eImpermeable to liquids.\u003c\/li\u003e\n  \u003cli\u003eCoating for concrete protection in accordance with BDS EN 1504-2 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eEpoxy resin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRAL 7032 grey; other colours on request according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003eComponent A 8.70 kg + Component B 1.30 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.35 kg\/l at +23 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003eComponent A : B = 83 : 17 by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~0.15 kg\/m² per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e~0.1 mm per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAdhesion\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;1.5 N\/mm² to concrete, \u0026gt;15 N\/mm² to steel, \u0026gt;10 N\/mm² to aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir from +10 °C to +30 °C; substrate from +10 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~30 min at +10 °C, ~20 min at +20 °C, ~10 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, clean and dry, free from dust, formwork oils, grease, old coatings, cement laitance or other materials that could impair adhesion. Concrete must be mechanically prepared to an open-textured surface, and metal must be blast-cleaned to Sa 2 1\/2 or SSPC-SP 10. Do not apply on damp substrates and protect the fresh coating from moisture, condensation and water for at least 24 hours.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the substrate, chemical exposure, area, required layer system and site conditions. For contact with specific chemicals or food products, resistance for the actual environment must be confirmed rather than selecting only by keyword.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"10 kg.","offer_id":54182688719172,"sku":"753241","price":211.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard-63NRAL7032-2-komponentnoepoksidnozashtitnopokritiezabetonimetal.webp?v=1738475381"},{"product_id":"sikacor-146-dw-epoksidno-pokritie-za-kontakt-s-piteyna-voda-sas-100-sadarzhanie-na-suho-veshtestvo","title":"SikaCor®-146 DW - Epoxy coating for contact with drinking water","description":"\u003cp\u003e\u003cstrong\u003eSikaCor®-146 DW\u003c\/strong\u003e is a fast-curing, 2-component epoxy coating with 100% solids content for steel and concrete. It is intended for surfaces in direct contact with liquids, including internal coatings for tanks, silos, containers, pipes and equipment for the supply of drinking water.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should SikaCor 146 DW be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose SikaCor®-146 DW when the coating must perform in direct contact with drinking water, food, beverages or aggressive liquids, and hard-elastic protection with high resistance to mechanical impact, abrasion and shock is required. This is not a standard concrete paint, but a professional system in which preparation, moisture, layer thickness and curing time are critical.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal coating of tanks, silos and containers.\u003c\/li\u003e\n  \u003cli\u003ePipes with a minimum diameter greater than 300 mm.\u003c\/li\u003e\n  \u003cli\u003eEquipment for the supply of drinking water.\u003c\/li\u003e\n  \u003cli\u003eFacilities in the food and beverage industry.\u003c\/li\u003e\n  \u003cli\u003eCorrosion protection of steel, stainless steel and aluminium.\u003c\/li\u003e\n  \u003cli\u003eProtection of concrete and cementitious levelling mortars in direct contact with liquids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for drinking water, various foods, chemicals, cleaning agents and disinfectants according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eVery good adhesion to steel, stainless steel, aluminium and concrete.\u003c\/li\u003e\n  \u003cli\u003eEconomical single-layer application on steel substrates by airless spraying.\u003c\/li\u003e\n  \u003cli\u003eNo additional treatments are required before initial filling according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eDoes not contain benzyl alcohol.\u003c\/li\u003e\n  \u003cli\u003eCertified to UBA, DVGW W 270 and KIWA NL BRL-K 759 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003e2-component epoxy coating with 100% solids content\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlue, beige, red-brown; gloss finish\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e12.6 kg and 6.3 kg net according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.35 kg\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMixing ratio\u003c\/td\u003e\n\u003ctd\u003eA : B = 100 : 26 by weight; 100 : 39 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSteel - dry film\u003c\/td\u003e\n\u003ctd\u003e400 μm; consumption ~0.54 kg\/m²; coverage ~1.85 m²\/kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePermissible layer thickness when spraying\u003c\/td\u003e\n\u003ctd\u003eMinimum 300 μm to maximum 800 μm per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConcrete - moisture content\u003c\/td\u003e\n\u003ctd\u003eMax. 4% by volume, measured with a CM device\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eMinimum +15 °C for air and substrate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003e~20 min at +20 °C; ~10 min at +30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSystem and application\u003c\/h2\u003e\n\u003cp\u003eOn steel, the system may be 1 x 400 μm by airless spraying or 3 x 150 μm by roller according to the TDS. On concrete, a system-based preparation is required: polymer-cement or epoxy base coat, pore control, moisture content up to 4% and sufficient adhesion strength. For drinking water tanks, the final drying times of 10-14 days at +20 °C and the cleaning\/disinfection procedures before first filling must be observed.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify whether the substrate is steel or concrete, whether there is contact with drinking water\/food, the area, application method, measured moisture content and required film thickness. This product must be selected as a system, not as a single universal paint.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"12.6 kg. \/ Beige","offer_id":54182696616260,"sku":null,"price":438.89,"currency_code":"EUR","in_stock":true},{"title":"12.6 kg. \/ Sin","offer_id":54182696681796,"sku":null,"price":438.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaCor-146DW-Epoksidnopokritiezakontaktspiteynavodasas100_sadarzhanienasuhoveshtestvo.webp?v=1738475640"},{"product_id":"sikagard-5500-zashtitno-pokritie-za-beton-s-visoka-sposobnost-za-premostvane-na-puknatini","title":"Sikagard®-5500 RAL 7032 - Elastic Protective Coating for Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-5500 RAL 7032\u003c\/strong\u003e is a 1-component, water-based elastic protective coating for concrete with high crack-bridging ability. It is used for decorative and technical protection of new and existing concrete structures, reducing the penetration of CO2, chlorides and moisture into the concrete and reinforcement.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should Sikagard 5500 be selected?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-5500 when the concrete structure is at risk of cracking, cyclic movement, carbonation, weathering or chloride penetration. The product is suitable for facades, bridges, car parks, silos, chimneys, retaining walls and Sika repair systems where elastic protection is required rather than a rigid epoxy coating.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNew concrete and reinforced concrete structures.\u003c\/li\u003e\n  \u003cli\u003eExtending the service life of concrete elements subject to cracking or cyclic movement.\u003c\/li\u003e\n  \u003cli\u003eBuildings, bridges, car parks, silos, chimneys and retaining walls.\u003c\/li\u003e\n  \u003cli\u003eReduction of damage by limiting chloride and CO2 penetration.\u003c\/li\u003e\n  \u003cli\u003eControl of reinforcement corrosion by restricting moisture ingress.\u003c\/li\u003e\n  \u003cli\u003eProtective coating over Sika levelling and sealing compounds for concrete repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-based, 1-component and ready to use.\u003c\/li\u003e\n  \u003cli\u003eVery good crack-bridging ability at low temperatures down to -20 °C according to the TDS.\u003c\/li\u003e\n  \u003cli\u003eHigh diffusion resistance to CO2 and reduction of carbonation.\u003c\/li\u003e\n  \u003cli\u003eVapour-permeable protective coating.\u003c\/li\u003e\n  \u003cli\u003eResistant to cyclic freeze\/thaw exposure and de-icing salts.\u003c\/li\u003e\n  \u003cli\u003eVery good resistance to weathering and ageing.\u003c\/li\u003e\n  \u003cli\u003eReduces the growth of algae and fungi.\u003c\/li\u003e\n  \u003cli\u003eCE marking to EN 1504-2 according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylate dispersion from renewable raw materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e15 l pail (~20.6 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eWhite thixotropic liquid; matt-gloss finish after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.37 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSikagard-5500 consumption\u003c\/td\u003e\n\u003ctd\u003e~0.30-0.60 kg\/m² per coat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMinimum dry film thickness\u003c\/td\u003e\n\u003ctd\u003e~210 μm for CO2 equivalent air layer thickness of 50 m\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStatic crack-bridging\u003c\/td\u003e\n\u003ctd\u003eA5 at -20 °C for 2 x 300, 2 x 500 or 2 x 600 g\/m² according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDynamic crack-bridging\u003c\/td\u003e\n\u003ctd\u003eB2 to B4.1 at -20 °C depending on consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAdhesion\u003c\/td\u003e\n\u003ctd\u003e1.9 N\/mm² to EN 1542\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eFrom +8 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSystem primers and limitations\u003c\/h2\u003e\n\u003cp\u003eThe system uses Sikagard®-552 W Aquaprimer or Sikagard®-551 S Elastic Primer with an indicative consumption of 0.10-0.15 kg\/m². The substrate must be clean, dry and prepared; new concrete must be at least 28 days old. Sikagard®-5500 is resistant to humid weather conditions, but is not suitable for permanent contact with water, underwater use or horizontal surfaces where puddles form.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease provide the area, whether the concrete is new or has an existing coating, the type of cracks, the exposure conditions and whether Sikagard®-552 W Aquaprimer or Sikagard®-551 S Elastic Primer will be applied. This allows the correct system and realistic consumption to be selected, rather than calculating only by litres.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"15 l.","offer_id":54182697763140,"sku":"718661","price":220.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard-5500_RAL7032_-_Zashtitno_pokritie_za_beton_s_visoka_sposobnost_za_premostvane_na_puknatini.webp?v=1738476004"},{"product_id":"sikagard-552-w-aquaprimer-grund-na-vodna-osnova","title":"Sikagard®-552 W Aquaprimer - Water-Based Primer for Protective Coatings on Concrete","description":"\u003cp\u003e\u003cstrong\u003eSikagard®-552 W Aquaprimer\u003c\/strong\u003e is a 1-component water-dispersed primer for improving adhesion when applying water-based polymer coatings and paints. It is used on concrete and mineral substrates, as well as on existing water-based coatings with good adhesion, as part of concrete protection systems according to EN 1504-2.\u003c\/p\u003e\n\n\u003ch2\u003eWhen should you choose Sikagard 552 W Aquaprimer?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikagard®-552 W Aquaprimer when the subsequent coating is water-dispersed, for example Sikagard®-5500, and a system primer is required for concrete, fibre cement, aerated concrete, gypsum or thin skim-coat compounds. If the subsequent coating is solvent-based, the TDS states that Sikagard®-551 S Elastic Primer must be used instead of this product.\u003c\/p\u003e\n\n\u003ch2\u003eMain applications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimer on concrete and mineral substrates before water-based polymer coatings\/paints.\u003c\/li\u003e\n  \u003cli\u003ePrimer on fibre cement, aerated concrete, gypsum and thin skim-coat compounds.\u003c\/li\u003e\n  \u003cli\u003ePrimer on Sika® MonoTop®-620, Sika® MonoTop®-723 N, Icoment-520 and similar substrates.\u003c\/li\u003e\n  \u003cli\u003ePrimer on existing water-based coatings with good adhesion.\u003c\/li\u003e\n  \u003cli\u003eUnder cementitious reprofiling compounds on concrete treated with a hydrophobic impregnation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey advantages\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSolvent-free, water-based dispersion.\u003c\/li\u003e\n  \u003cli\u003eVapour-permeable primer.\u003c\/li\u003e\n  \u003cli\u003eImproves adhesion to the substrate for water-based coatings and cementitious reprofiling compounds.\u003c\/li\u003e\n  \u003cli\u003ePart of a concrete surface protection system according to BDS EN 1504-2, as stated in the TDS.\u003c\/li\u003e\n  \u003cli\u003eReady to use and easy to apply by brush, roller or airless spray.\u003c\/li\u003e\n  \u003cli\u003eVOC \u0026lt;30 g\/l according to the TDS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChemical base\u003c\/td\u003e\n\u003ctd\u003eAcrylate dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003e10 l plastic pails according to the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAppearance\u003c\/td\u003e\n\u003ctd\u003eMilky white liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDensity\u003c\/td\u003e\n\u003ctd\u003e~1.0 kg\/l at +20 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolids content by volume\u003c\/td\u003e\n\u003ctd\u003e~20%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003e~0.10-0.12 kg\/m² or ~8-10 m²\/l, depending on absorption\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003eAir and substrate from +8 °C to +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWaiting time to next coat\u003c\/td\u003e\n\u003ctd\u003e12 h at +8 °C, 5 h at +20 °C, 2.5 h at +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, free from poorly bonded particles, and have a tensile adhesion strength above 1 N\/mm². New concrete must be at least 28 days old. Do not dilute the product. When used under cementitious renders or reprofiling compounds, the subsequent mortar must be applied while the primer is still tacky; if the primer has dried completely, apply a new coat.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003ePlease specify which coating will be applied after the primer, whether the substrate is new concrete, a skim coat or an old coating, and whether the coating is water-based. This is important because Sikagard®-552 W Aquaprimer is not a universal primer for all coatings.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"8 l.","offer_id":54182705692996,"sku":"740849","price":59.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/Sikagard-552WAquaprimer-Grundnavodnaosnova.webp?v=1738476451"},{"product_id":"sikalastic-6100-fx-uv-elastichna-tsimentova-hidroizolatsia-15kg","title":"Sikalastic®-6100 FX - UV-Resistant Elastic Cementitious Waterproofing 15 kg","description":"\u003cp\u003e\u003cstrong\u003eSikalastic®-6100 FX\u003c\/strong\u003e is a 1-component, elastic, flexible, lightweight cementitious membrane for \u003cstrong\u003ewaterproofing and concrete protection\u003c\/strong\u003e. The product is mixed only with water, applied manually or by spray, and forms a seamless membrane resistant to positive and negative water pressure.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to choose Sikalastic 6100 FX?\u003c\/h2\u003e\n\u003cp\u003eChoose Sikalastic®-6100 FX when you need a strong waterproofing solution for more than one type of project: bathroom, shower enclosure, balcony, terrace, small roof area, foundation, concrete wall, swimming pool under tiles, tank, or an area subject to constant water exposure. This is not a standard rigid cementitious skim coat, but an elastic membrane with crack-bridging properties, UV resistance, and protection of concrete against carbonation and chloride attack.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the product is so strong\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV-resistant\u003c\/strong\u003e - can be used as a final exposed coating in exterior applications without deterioration of mechanical performance according to the TDS.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWaterproof at 2 mm\u003c\/strong\u003e - withstands up to 5 bar positive water pressure and up to 2.5 bar negative pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElastic down to -10 °C\u003c\/strong\u003e - retains elasticity under water and at low temperatures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBridges cracks\u003c\/strong\u003e - class A4 at +23 °C, A3 at -10 °C, and dynamic crack bridging B3.1.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast return to service\u003c\/strong\u003e - second coat after 2-5 hours; water pressure and mechanical loading after approximately 3 days.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBreathable coating\u003c\/strong\u003e - permeable to water vapour, but with very low capillary water absorption.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConcrete protection\u003c\/strong\u003e - high resistance to CO₂ diffusion, sulfate resistance, and protection against chloride attack.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuitable for potable water\u003c\/strong\u003e - the TDS states compliance with Directive (EU) 2020\/2184 and WRAS approval.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow consumption\u003c\/strong\u003e - lightweight formula; one 15 kg bag covers approximately 8.3 m² at 2 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhere it can be used\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInterior and exterior waterproofing on concrete, cementitious substrates, and masonry.\u003c\/li\u003e\n  \u003cli\u003eBathrooms, shower enclosures, and wet rooms.\u003c\/li\u003e\n  \u003cli\u003eBalconies, terraces, and small roof areas, including where UV resistance is critical.\u003c\/li\u003e\n  \u003cli\u003eWaterproofing under tiles in combination with suitable adhesives and tapes.\u003c\/li\u003e\n  \u003cli\u003eSwimming pools under tiles, tanks, pipes, and water-retaining structures.\u003c\/li\u003e\n  \u003cli\u003eFoundations, concrete walls, bases, and structures.\u003c\/li\u003e\n  \u003cli\u003eProtection of concrete against carbonation, chlorides, sulfates, and atmospheric exposure.\u003c\/li\u003e\n  \u003cli\u003eBridge decks and projects with subsequent asphalt layers, where permitted by the project specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical guidance from the TDS\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003e1-component elastic cementitious membrane\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackaging\u003c\/td\u003e\n      \u003ctd\u003e15 kg bag\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour\u003c\/td\u003e\n      \u003ctd\u003eLight grey and white according to the TDS; this product is the 15 kg variant\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMixing water\u003c\/td\u003e\n      \u003ctd\u003e5.6-6.2 l water per 15 kg\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConsumption\u003c\/td\u003e\n      \u003ctd\u003e~0.9 kg\/m²\/mm powder product; ~1.2 kg\/m²\/mm mixed product\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMinimum thickness for waterproofing\u003c\/td\u003e\n      \u003ctd\u003e2 mm total thickness\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoverage\u003c\/td\u003e\n      \u003ctd\u003e~8.3 m² from 15 kg at 2 mm, depending on substrate roughness\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSecond application\u003c\/td\u003e\n      \u003ctd\u003eAfter 2-5 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTile installation\u003c\/td\u003e\n      \u003ctd\u003eAfter 4-8 hours under suitable conditions\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWater pressure \/ mechanical loading\u003c\/td\u003e\n      \u003ctd\u003eAfter approximately 3 days\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApplication temperature\u003c\/td\u003e\n      \u003ctd\u003eFrom +5 °C to +35 °C for the product, air, and substrate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUV resistance\u003c\/td\u003e\n      \u003ctd\u003eAfter 2000 h in a UV chamber, no changes in appearance were observed according to the TDS\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eUV protection and exterior application\u003c\/h2\u003e\n\u003cp\u003eThe most important advantage for exterior projects is UV resistance. Sikalastic®-6100 FX can function as a visible final coating in exterior applications when the substrate is correctly prepared and site conditions comply with the TDS. This makes it a very strong choice for details, balconies, terraces, small roof areas, and concrete surfaces where water, sun, and temperature changes act on the system at the same time.\u003c\/p\u003e\n\n\u003ch2\u003eSikalastic 6100 FX or another Sika product?\u003c\/h2\u003e\n\u003cp\u003eIf you need an \u003cstrong\u003eelastic cementitious waterproofing with UV resistance and a wide application range\u003c\/strong\u003e, Sikalastic®-6100 FX is the stronger all-round choice. If you need a classic 2-component waterproofing under tiles, compare it with \u003ca href=\"\/en\/products\/sikatop-seal-107-elastik-elastichna-tsimentova-hidroizolatsia\"\u003eSikaTop® Seal-107 Elastik\u003c\/a\u003e. For a polyurethane liquid membrane for roofs, see \u003ca href=\"\/en\/products\/sikalastic-612-ednokomponentna-poliuretanova-hidroizolatsionna-membrana\"\u003eSikalastic®-612\u003c\/a\u003e, and for a UV-resistant water-based bituminous membrane, see \u003ca href=\"\/en\/products\/sikalastic-685-elastomerna-uv-ustoychiva-techna-bitumna-membrana-na-vodna-osnova\"\u003eSikalastic®-685\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePreparation and limitations\u003c\/h2\u003e\n\u003cp\u003eThe substrate must be sound, clean, and free from oil, grease, dust, loose particles, defective old coatings, and materials that reduce adhesion. Sikalastic®-6100 FX is applied to a pre-dampened substrate, but without standing water. Do not apply to frozen surfaces, and do not work if the temperature may fall below +5 °C within the next 24 hours. Avoid application in direct sunlight.\u003c\/p\u003e\n\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cp\u003eSend the area, substrate type, whether it is indoors or outdoors, whether tiles will be installed, and whether there is constant water exposure, cracks, joints, drains, upstands, or contact with potable water. This allows the correct thickness and consumption to be confirmed, and whether Sikalastic®-6100 FX is the best system for your project.\u003c\/p\u003e\n","brand":"Sika","offers":[{"title":"Default Title","offer_id":56793493143876,"sku":null,"price":98.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/glo-227012-sikalastic-6100-fx-grey-15kg-de-en-fr-it-nl-pl-1x1-01869257_3A1-1.jpg?v=1779821117"},{"product_id":"sikacor-950-f-cheren-zashtitno-pokritie-za-beton-i-stomana-15-kg","title":"SikaCor 950 F Black - Protective Coating for Concrete and Steel \/ 15 kg","description":"\u003ch2\u003eSikaCor 950 F Black - Protective Coating for Concrete and Steel \/ 15 kg - Application and Technical Profile\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSikaCor 950 F Black - Protective Coating for Concrete and Steel \/ 15 kg\u003c\/strong\u003e is a Sika product in the Protective Coatings category, intended for professional construction applications.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtective coating for concrete and steel, for underground and underwater structures in hydraulic engineering facilities, as well as an internal coating for tanks and water-retaining structures, including wastewater treatment, agricultural and chemical industries, etc. Suitable for areas where application on damp concrete is unavoidable.\u003c\/li\u003e\n\u003cli\u003eSikaCor®-950 F can be exposed to water immediately after application, bearing in mind that solvents enter the water, resulting in temporary contamination.\u003c\/li\u003e\n\u003cli\u003eTherefore, immediate exposure to water should be carried out only in special cases and after consultation with the environmental protection authorities.\u003c\/li\u003e\n\u003cli\u003eNot suitable for surfaces in contact with drinking water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAbrasion-resistant and impact-resistant.\u003c\/li\u003e\n\u003cli\u003eWith excellent resistance to water and chemicals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 15 kg.\u003c\/p\u003e\n\u003cp\u003eSelection and use must comply with the manufacturer's technical data sheet, substrate preparation, site conditions, and the requirements of the complete system.\u003c\/p\u003e","brand":"Sika","offers":[{"title":"Default Title","offer_id":56795730903364,"sku":"640187","price":239.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/SikaCor_-950F_-Pokritiezastomanaibetonzatezhakrezhimnaeksploatatsia_38d9be92-9c1b-467a-954f-03b1619d05ec.webp?v=1779966036"},{"product_id":"mc-color-proof-pure-prozrachen-impregnator-15-l","title":"MC-Color Proof pure – прозрачен импрегнатор \/ 15 l","description":"\u003cp\u003e\u003cstrong\u003eMC-Color Proof pure\u003c\/strong\u003e е готов за употреба прозрачен импрегнатор на водна основа за минерални повърхности.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eИмпрегниране на повърхности на минерална основа.\u003c\/li\u003e\n\u003cli\u003eБезцветна основа за производство на лазурни покрития.\u003c\/li\u003e\n\u003cli\u003eВътрешни и външни алкални и неутрални основи.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eЛеко филмообразуващ и прозрачен след изсъхване.\u003c\/li\u003e\n\u003cli\u003eОтворен за дифузия на водни пари и забавя карбонизацията.\u003c\/li\u003e\n\u003cli\u003eНамалява водопоглъщането и е устойчив на UV и атмосферни влияния.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e61150000310101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e15 l\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eРазход\u003c\/th\u003e\n\u003ctd\u003e150–200 ml\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003e+8 °C до +30 °C; относителна влажност до 85 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eФиниш\u003c\/th\u003e\n\u003ctd\u003eПрозрачен\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152005112132,"sku":"61150000310101","price":200.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/MC_Color_Proof_pure_15l_jpg.webp?v=1787739044"},{"product_id":"mc-color-proof-pro-prozrachno-zashtitno-pokritie-beton-15-l","title":"MC-Color Proof pro – прозрачно защитно покритие за бетон \/ 15 l","description":"\u003cp\u003e\u003cstrong\u003eMC-Color Proof pro\u003c\/strong\u003e е готово за употреба прозрачно защитно покритие за бетон на основата на водна кополимерна дисперсия.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eПревантивна защита на вътрешни и външни бетонни повърхности.\u003c\/li\u003e\n\u003cli\u003eЗащита на външни повърхности без пешеходен или автомобилен трафик.\u003c\/li\u003e\n\u003cli\u003eПриложение в зони с пръски от размразяващи соли.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eМатово-прозрачно филмообразуващо покритие.\u003c\/li\u003e\n\u003cli\u003eОтворено за дифузия на водни пари и възпрепятства карбонизацията.\u003c\/li\u003e\n\u003cli\u003eУстойчиво на UV, атмосферни влияния, температури, замръзване и размразяващи соли.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e61160000310101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e15 l\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eРазход\u003c\/th\u003e\n\u003ctd\u003e300 ml\/m² при 2 слоя по 150 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003e+8 °C до +30 °C; относителна влажност под 85 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eФиниш\u003c\/th\u003e\n\u003ctd\u003eМатово-прозрачен\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152005341508,"sku":"61160000310101","price":203.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/MC_Color_Proof_pro_15l_jpg.webp?v=1787739050"},{"product_id":"mc-color-t-21-visokoefektivno-zashtitno-pokritie-15-l","title":"MC-Color T 21 – високоефективно защитно покритие \/ 15 l","description":"\u003cp\u003e\u003cstrong\u003eMC-Color T 21\u003c\/strong\u003e е готово за употреба високоефективно защитно покритие на основата на еднокомпонентна акрилна дисперсия на водна основа.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eПревантивна защита на външни бетонни повърхности, изложени на атмосферни влияния.\u003c\/li\u003e\n\u003cli\u003eЗащита на открити повърхности без трафик.\u003c\/li\u003e\n\u003cli\u003eПриложение в зони с пръски и разпръскване на размразяващи соли.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eФилмообразуващо гланцово покритие, отворено за дифузия на водни пари.\u003c\/li\u003e\n\u003cli\u003eУстойчиво на UV и атмосферни влияния, с ниско задържане на замърсявания.\u003c\/li\u003e\n\u003cli\u003eПодходящо за валяк и безвъздушно пръскане.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e6141732 031 0101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e15 l\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦветове по ценовата листа\u003c\/th\u003e\n\u003ctd\u003eБяло, RAL 7035, RAL 7032\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eРазход\u003c\/th\u003e\n\u003ctd\u003e300 ml\/m² при 2 слоя по 150 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003e+8 °C до +30 °C; относителна влажност под 85 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152005570884,"sku":"6141732 031 0101","price":192.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/MC_Color_T_21_Eimer_15l_png.webp?v=1787739055"},{"product_id":"mc-color-flair-pure-pigmentirano-zashtitno-pokritie-15-l","title":"MC-Color Flair pure – пигментирано защитно покритие \/ 15 l","description":"\u003cp\u003e\u003cstrong\u003eMC-Color Flair pure\u003c\/strong\u003e е готово за употреба пигментирано матово защитно покритие на основата на водна кополимерна дисперсия.\u003c\/p\u003e\u003ch2\u003eОбласти на приложение\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eПревантивна защита на външни бетонни повърхности, изложени на атмосферни влияния.\u003c\/li\u003e\n\u003cli\u003eПовърхностна защита на открити повърхности без трафик.\u003c\/li\u003e\n\u003cli\u003eПриложение в зони с пръски от размразяващи соли.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eОсновни характеристики\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eМатово филмообразуващо покритие, отворено за дифузия на водни пари.\u003c\/li\u003e\n\u003cli\u003eУстойчиво на UV, атмосферни влияния, температурен шок, замръзване и размразяващи соли.\u003c\/li\u003e\n\u003cli\u003eПодходящо за валяк и безвъздушно пръскане.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eТехнически данни\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eАртикулен код\u003c\/th\u003e\n\u003ctd\u003e6170732 031 0101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eОпаковка\u003c\/th\u003e\n\u003ctd\u003e15 l\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eЦветове по ценовата листа\u003c\/th\u003e\n\u003ctd\u003eRAL 7032, RAL 7035, MC-Grau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eРазход\u003c\/th\u003e\n\u003ctd\u003e220 ml\/m² при 2 слоя по 110 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eУсловия за полагане\u003c\/th\u003e\n\u003ctd\u003e+8 °C до +30 °C; относителна влажност под 85 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eВажно при полагане\u003c\/h2\u003e\u003cp\u003eПодготовката на основата, смесването, нанасянето и последващите грижи трябва да се изпълнят според актуалния технически лист на производителя и условията на конкретния обект.\u003c\/p\u003e","brand":"MC-Bauchemie","offers":[{"title":"Default Title","offer_id":57152006750532,"sku":"6170732 031 0101","price":167.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/7646\/9316\/files\/MC_Color_Flair_pure_15l_jpg.webp?v=1787739083"}],"url":"https:\/\/stroitelna-himia.bg\/en\/collections\/%d0%b7%d0%b0%d1%88%d0%b8%d1%82%d0%bd%d0%b8-%d0%bf%d0%be%d0%ba%d1%80%d0%b8%d1%82%d0%b8%d1%8f-%d0%b7%d0%b0-%d0%b1%d0%b5%d1%82%d0%be%d0%bd.oembed","provider":"Строителна Химия","version":"1.0","type":"link"}